target/linux/ramips/dts/WHR-G300N.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 / {
   6         compatible = "WHR-G300N", "ralink,rt3052-soc";
   7         model = "Buffalo WHR-G300N";
   8
   9         pinctrl {
  10                 state_default: pinctrl0 {
  11                         gpio {
  12                                 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  13                                 ralink,function = "gpio";
  14                         };
  15                 };
  16         };
  17
  18         cfi@1f000000 {
  19                 compatible = "cfi-flash";
  20                 reg = <0x1f000000 0x800000>;
  21                 bank-width = <2>;
  22                 device-width = <2>;
  23                 #address-cells = <1>;
  24                 #size-cells = <1>;
  25         };
  26
  27         esw@10110000 {
  28                 mediatek,portmap = <0x2f>;
  29         };
  30
  31         /* FIXME: no partitions defined */
  32 /*      wmac@10180000 {
  33                 ralink,mtd-eeprom = <&factory 0>;
  34         };
  35 */
  36         gpio-leds {
  37                 compatible = "gpio-leds";
  38
  39                 diag {
  40                         label = "whr-g300n:red:diag";
  41                         gpios = <&gpio0 7 1>;
  42                 };
  43
  44                 router {
  45                         label = "whr-g300n:green:router";
  46                         gpios = <&gpio0 9 1>;
  47                 };
  48
  49                 security {
  50                         label = "whr-g300n:amber:security";
  51                         gpios = <&gpio0 14 1>;
  52                 };
  53         };
  54
  55         gpio-keys-polled {
  56                 compatible = "gpio-keys-polled";
  57                 #address-cells = <1>;
  58                 #size-cells = <0>;
  59                 poll-interval = <20>;
  60
  61                 reset {
  62                         label = "reset";
  63                         gpios = <&gpio0 10 1>;
  64                         linux,code = <0x198>;
  65                 };
  66
  67                 aoss {
  68                         label = "aoss";
  69                         gpios = <&gpio0 0 1>;
  70                         linux,code = <0x211>;
  71                 };
  72
  73                 router-off {
  74                         label = "router-off";
  75                         gpios = <&gpio0 11 1>;
  76                         linux,code = <0x102>;
  77                 };
  78
  79                 router-on {
  80                         label = "router-on";
  81                         gpios = <&gpio0 8 1>;
  82                         linux,code = <0x103>;
  83                 };
  84         };
  85 };