rpcd: iwinfo plugin fixes
[openwrt.git] / target / linux / ramips / dts / WHR-1166D.dts
1 /dts-v1/;
2
3 #include "mt7620a.dtsi"
4
5 / {
6         compatible = "ralink,mt7620a-soc";
7         model = "Buffalo WHR-1166D";
8
9         palmbus@10000000 {
10                 gpio2: gpio@660 {
11                         status = "okay";
12                 };
13
14                 spi@b00 {
15                         status = "okay";
16
17                         m25p80@0 {
18                                 #address-cells = <1>;
19                                 #size-cells = <1>;
20                                 compatible = "jedec,spi-nor";
21                                 reg = <0 0>;
22                                 linux,modalias = "m25p80", "mx25l6405d";
23                                 spi-max-frequency = <10000000>;
24
25                                 partition@0 {
26                                         label = "u-boot";
27                                         reg = <0x0 0x30000>;
28                                         read-only;
29                                 };
30
31                                 partition@30000 {
32                                         label = "u-boot-env";
33                                         reg = <0x30000 0x10000>;
34                                         read-only;
35                                 };
36
37                                 factory: partition@40000 {
38                                         label = "factory";
39                                         reg = <0x40000 0x10000>;
40                                         read-only;
41                                 };
42
43                                 partition@50000 {
44                                         label = "firmware";
45                                         reg = <0x50000 0xfb0000>;
46                                 };
47                         };
48                 };
49         };
50
51         pinctrl {
52                 state_default: pinctrl0 {
53                         gpio {
54                                 ralink,group = "i2c", "uartf", "wled", "nd_sd";
55                                 ralink,function = "gpio";
56                         };
57                 };
58         };
59
60         ethernet@10100000 {
61                 pinctrl-names = "default";
62                 pinctrl-0 = <&rgmii1_pins &mdio_pins>;
63
64                 port@5 {
65                         status = "okay";
66                         phy-handle = <&phy5>;
67                         phy-mode = "rgmii";
68                 };
69
70                 mdio-bus {
71                         status = "okay";
72
73                         phy5: ethernet-phy@5 {
74                                 reg = <5>;
75                                 phy-mode = "rgmii";
76                         };
77                 };
78         };
79
80         gsw@10110000 {
81                 mediatek,port4 = "ephy";
82         };
83
84         wmac@10180000 {
85                 ralink,mtd-eeprom = <&factory 0>;
86         };
87
88         pcie@10140000 {
89                 status = "okay";
90
91                 pcie-bridge {
92                         mt76@0,0 {
93                                 reg = <0x0000 0 0 0 0>;
94                                 device_type = "pci";
95                                 mediatek,mtd-eeprom = <&factory 32768>;
96                                 mediatek,2ghz = <0>;
97                         };
98                 };
99         };
100
101         gpio-leds {
102                 compatible = "gpio-leds";
103
104                 power {
105                         label = "whr-1166d:red:power";
106                         gpios = <&gpio0 7 1>;
107                 };
108
109                 wifi {
110                         label = "whr-1166d:green:wifi";
111                         gpios = <&gpio0 8 1>;
112                 };
113
114                 power2 {
115                         label = "whr-1166d:green:power";
116                         gpios = <&gpio0 9 1>;
117                 };
118
119                 wifi2 {
120                         label = "whr-1166d:orange:wifi";
121                         gpios = <&gpio0 10 1>;
122                 };
123
124                 internet {
125                         label = "whr-1166d:green:internet";
126                         gpios = <&gpio2 17 1>;
127                 };
128
129                 router {
130                         label = "whr-1166d:orange:router";
131                         gpios = <&gpio2 18 1>;
132                 };
133
134                 router2 {
135                         label = "whr-1166d:green:router";
136                         gpios = <&gpio2 19 1>;
137                 };
138         };
139
140         gpio-keys-polled {
141                 compatible = "gpio-keys-polled";
142                 #address-cells = <1>;
143                 #size-cells = <0>;
144                 poll-interval = <20>;
145
146                 reset {
147                         label = "reset";
148                         gpios = <&gpio2 12 1>;
149                         linux,code = <0x198>;
150                 };
151
152                 aoss {
153                         label = "aoss";
154                         gpios = <&gpio2 13 1>;
155                         linux,code = <0x211>;
156                 };
157
158                 ap {
159                         label = "ap";
160                         gpios = <&gpio2 14 1>;
161                         linux,code = <0x100>;
162                         linux,input-type = <5>; /* EV_SW */
163                 };
164
165                 bridge {
166                         label = "bridge";
167                         gpios = <&gpio2 15 1>;
168                         linux,code = <0x100>;
169                         linux,input-type = <5>; /* EV_SW */
170                 };
171         };
172 };