target/linux/ramips/dts/UR-326N4G.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "UR-326N4G", "ralink,rt3052-soc";
   7         model = "UR-326N4G Wireless N router";
   8
   9         memorydetect {
  10                 ralink,memory = <0x0 0x200000 0x4000000>;
  11         };
  12
  13         palmbus@10000000 {
  14                 sysc@0 {
  15                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii";
  16                         ralink,gpiomux = "mdio";
  17                         ralink,uartmux = "gpio";
  18                         ralink,wdtmux = <1>;
  19                 };
  20
  21                 gpio0: gpio@600 {
  22                         status = "okay";
  23                 };
  24         };
  25
  26         cfi@1f000000 {
  27                 compatible = "cfi-flash";
  28                 reg = <0x1f000000 0x800000>;
  29
  30                 bank-width = <2>;
  31                 device-width = <2>;
  32                 #address-cells = <1>;
  33                 #size-cells = <1>;
  34
  35                 partition@0 {
  36                         label = "u-boot";
  37                         reg = <0x0 0x30000>;
  38                         read-only;
  39                 };
  40
  41                 partition@30000 {
  42                         label = "u-boot-env";
  43                         reg = <0x30000 0x10000>;
  44                         read-only;
  45                 };
  46
  47                 factory: partition@40000 {
  48                         label = "factory";
  49                         reg = <0x40000 0x10000>;
  50                         read-only;
  51                 };
  52
  53                 partition@50000 {
  54                         label = "firmware";
  55                         reg = <0x50000 0x3b0000>;
  56                 };
  57         };
  58
  59         ethernet@10100000 {
  60                 status = "okay";
  61         };
  62
  63         esw@10110000 {
  64                 status = "okay";
  65                 ralink,portmap = <0x2f>;
  66         };
  67
  68         gpio-leds {
  69                 compatible = "gpio-leds";
  70                 3g {
  71                         label = "ur326:green:3g";
  72                         gpios = <&gpio0 9 1>;
  73                 };
  74                 gateway {
  75                         label = "ur326:green:gateway";
  76                         gpios = <&gpio0 11 1>;
  77                 };
  78                 ap {
  79                         label = "ur326:green:ap";
  80                         gpios = <&gpio0 12 1>;
  81                 };
  82                 wps {
  83                         label = "ur326:green:wps";
  84                         gpios = <&gpio0 14 1>;
  85                 };
  86                 station {
  87                         label = "ur326:green:station";
  88                         gpios = <&gpio0 13 1>;
  89                 };
  90         };
  91
  92         gpio-keys-polled {
  93                 compatible = "gpio-keys-polled";
  94                 #address-cells = <1>;
  95                 #size-cells = <0>;
  96                 poll-interval = <20>;
  97                 reset_wps {
  98                         label = "reset_wps";
  99                         gpios = <&gpio0 10 1>;
 100                         linux,code = <0x198>;
 101                 };
 102                 mode {
 103                         label = "mode";
 104                         gpios = <&gpio0 7 1>;
 105                         linux,code = <0x32>;
 106                 };
 107         };
 108
 109         wmac@10180000 {
 110                 status = "okay";
 111         };
 112
 113         otg@101c0000 {
 114                 status = "okay";
 115         };
 116 };