target/linux/ramips/dts/RT-N13U.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "RT-N13U", "ralink,rt3052-soc";
   7         model = "Asus RT-N13U";
   8
   9         memorydetect {
  10                 ralink,memory = <0x0 0x200000 0x4000000>;
  11         };
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)";
  15         };
  16
  17         palmbus@10000000 {
  18                 sysc@0 {
  19                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  20                         ralink,uartmux = "gpio";
  21                         ralink,wdtmux = <1>;
  22                 };
  23
  24                 gpio0: gpio@600 {
  25                         status = "okay";
  26                 };
  27         };
  28
  29         cfi@1f000000 {
  30                 compatible = "cfi-flash";
  31                 reg = <0x1f000000 0x800000>;
  32
  33                 bank-width = <2>;
  34                 device-width = <2>;
  35                 #address-cells = <1>;
  36                 #size-cells = <1>;
  37
  38                 partition@0 {
  39                         label = "u-boot";
  40                         reg = <0x0 0x30000>;
  41                         read-only;
  42                 };
  43
  44                 partition@30000 {
  45                         label = "u-boot-env";
  46                         reg = <0x30000 0x10000>;
  47                         read-only;
  48                 };
  49
  50                 factory: partition@40000 {
  51                         label = "factory";
  52                         reg = <0x40000 0x10000>;
  53                         read-only;
  54                 };
  55
  56                 partition@50000 {
  57                         label = "firmware";
  58                         reg = <0x50000 0x7b0000>;
  59                 };
  60         };
  61
  62         gpio-leds {
  63                 compatible = "gpio-leds";
  64                 power {
  65                         label = "rt-n13u:power";
  66                         gpios = <&gpio0 7 1>;
  67                 };
  68                 wifi {
  69                         label = "rt-n13u:wifi";
  70                         gpios = <&gpio0 8 1>;
  71                 };
  72         };
  73
  74         gpio-keys-polled {
  75                 compatible = "gpio-keys-polled";
  76                 #address-cells = <1>;
  77                 #size-cells = <0>;
  78                 poll-interval = <10>;
  79                 reset {
  80                         label = "reset";
  81                         gpios = <&gpio0 10 1>;
  82                         linux,code = <0x198>;
  83                 };
  84                 wps {
  85                         label = "wps";
  86                         gpios = <&gpio0 0 1>;
  87                         linux,code = <0x211>;
  88                 };
  89         };
  90
  91         ethernet@10100000 {
  92                 status = "okay";
  93         };
  94
  95         esw@10110000 {
  96                 status = "okay";
  97                 ralink,portmap = <0x2f>;
  98         };
  99
 100         wmac@10180000 {
 101                 status = "okay";
 102         };
 103
 104         otg@101c0000 {
 105                 status = "okay";
 106         };
 107 };