target/linux/ramips/dts/RT-N10-PLUS.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         #address-cells = <1>;
   7         #size-cells = <1>;
   8         compatible = "RT-N10-PLUS", "ralink,rt3050-soc";
   9         model = "Asus RT-N10+";
  10
  11         memorydetect {
  12                 ralink,memory = <0x0 0x200000 0x4000000>;
  13         };
  14
  15         chosen {
  16                 bootargs = "mtdparts=1f000000.cfi:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,3776k@0x50000(firmware)";
  17         };
  18
  19         palmbus@10000000 {
  20                 sysc@0 {
  21                         ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  22                         ralink,uartmux = "gpio";
  23                         ralink,wdtmux = <1>;
  24                 };
  25
  26                 gpio0: gpio@600 {
  27                         status = "okay";
  28                 };
  29         };
  30
  31         cfi@1f000000 {
  32                 compatible = "cfi-flash";
  33                 reg = <0x1f000000 0x800000>;
  34
  35                 bank-width = <2>;
  36                 device-width = <2>;
  37                 #address-cells = <1>;
  38                 #size-cells = <1>;
  39         };
  40
  41         ethernet@10100000 {
  42                 status = "okay";
  43         };
  44
  45         esw@10110000 {
  46                 status = "okay";
  47                 ralink,portmap = <0x3e>;
  48         };
  49
  50         gpio-leds {
  51                 compatible = "gpio-leds";
  52                 wps {
  53                         label = "asus:green:wps";
  54                         gpios = <&gpio0 14 1>;
  55                 };
  56         };
  57
  58         gpio-keys-polled {
  59                 compatible = "gpio-keys-polled";
  60                 #address-cells = <1>;
  61                 #size-cells = <0>;
  62                 poll-interval = <20>;
  63                 reset {
  64                         label = "reset";
  65                         gpios = <&gpio0 10 1>;
  66                         linux,code = <0x198>;
  67                 };
  68                 wps {
  69                         label = "wps";
  70                         gpios = <&gpio0 0 1>;
  71                         linux,code = <0x211>;
  72                 };
  73         };
  74
  75         wmac@10180000 {
  76                 status = "okay";
  77         };
  78 };