[ramips] remove bootargs from dts
[openwrt.git] / target / linux / ramips / dts / RT-N10-PLUS.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6         compatible = "RT-N10-PLUS", "ralink,rt3050-soc";
7         model = "Asus RT-N10+";
8
9         memorydetect {
10                 ralink,memory = <0x0 0x200000 0x4000000>;
11         };
12
13         palmbus@10000000 {
14                 sysc@0 {
15                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
16                         ralink,uartmux = "gpio";
17                         ralink,wdtmux = <1>;
18                 };
19
20                 gpio0: gpio@600 {
21                         status = "okay";
22                 };
23         };
24
25         cfi@1f000000 {
26                 compatible = "cfi-flash";
27                 reg = <0x1f000000 0x800000>;
28
29                 bank-width = <2>;
30                 device-width = <2>;
31                 #address-cells = <1>;
32                 #size-cells = <1>;
33
34                 partition@0 {
35                         label = "u-boot";
36                         reg = <0x0 0x30000>;
37                         read-only;
38                 };
39
40                 partition@30000 {
41                         label = "devdata";
42                         reg = <0x30000 0x10000>;
43                         read-only;
44                 };
45
46                 partition@40000 {
47                         label = "devconf";
48                         reg = <0x40000 0x10000>;
49                         read-only;
50                 };
51
52                 partition@50000 {
53                         label = "firmware";
54                         reg = <0x50000 0x3b0000>;
55                 };
56         };
57
58         ethernet@10100000 {
59                 status = "okay";
60         };
61
62         esw@10110000 {
63                 status = "okay";
64                 ralink,portmap = <0x3e>;
65         };
66
67         gpio-leds {
68                 compatible = "gpio-leds";
69                 wps {
70                         label = "asus:green:wps";
71                         gpios = <&gpio0 14 1>;
72                 };
73         };
74
75         gpio-keys-polled {
76                 compatible = "gpio-keys-polled";
77                 #address-cells = <1>;
78                 #size-cells = <0>;
79                 poll-interval = <20>;
80                 reset {
81                         label = "reset";
82                         gpios = <&gpio0 10 1>;
83                         linux,code = <0x198>;
84                 };
85                 wps {
86                         label = "wps";
87                         gpios = <&gpio0 0 1>;
88                         linux,code = <0x211>;
89                 };
90         };
91
92         wmac@10180000 {
93                 status = "okay";
94         };
95 };