target/linux/ramips/dts/NW718.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "NW718", "ralink,rt3050-soc";
   7         model = "Netcore NW718";
   8
   9         palmbus@10000000 {
  10                 sysc@0 {
  11                         ralink,pinmux = "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  12                         ralink,gpiomux = "i2c";
  13                         ralink,uartmux = "gpio";
  14                         ralink,wdtmux = <1>;
  15                 };
  16
  17                 gpio0: gpio@600 {
  18                         status = "okay";
  19                 };
  20
  21                 spi@b00 {
  22                         status = "okay";
  23                         m25p80@0 {
  24                                 #address-cells = <1>;
  25                                 #size-cells = <1>;
  26                                 compatible = "mx25l3205d";
  27                                 reg = <0 0>;
  28                                 linux,modalias = "m25p80", "mx25l3205d";
  29                                 spi-max-frequency = <25000000>;
  30
  31                                 partition@0 {
  32                                         label = "u-boot";
  33                                         reg = <0x0 0x30000>;
  34                                         read-only;
  35                                 };
  36
  37                                 partition@30000 {
  38                                         label = "config";
  39                                         reg = <0x30000 0x20000>;
  40                                         read-only;
  41                                 };
  42
  43                                 factory: partition@50000 {
  44                                         label = "factory";
  45                                         reg = <0x50000 0x10000>;
  46                                         read-only;
  47                                 };
  48
  49                                 partition@60000 {
  50                                         label = "firmware";
  51                                         reg = <0x60000 0x3a0000>;
  52                                 };
  53                         };
  54                 };
  55         };
  56
  57         ethernet@10100000 {
  58                 status = "okay";
  59         };
  60
  61         esw@10110000 {
  62                 status = "okay";
  63                 ralink,portmap = <0x2f>;
  64         };
  65
  66         gpio-leds {
  67                 compatible = "gpio-leds";
  68                 cpu {
  69                         label = "nw718:amber:cpu";
  70                         gpios = <&gpio0 13 1>;
  71                 };
  72                 usb {
  73                         label = "nw718:amber:usb";
  74                         gpios = <&gpio0 8 1>;
  75                 };
  76                 wps {
  77                         label = "nw718:amber:wps";
  78                         gpios = <&gpio0 14 1>;
  79                 };
  80         };
  81
  82         gpio-keys-polled {
  83                 compatible = "gpio-keys-polled";
  84                 #address-cells = <1>;
  85                 #size-cells = <0>;
  86                 poll-interval = <20>;
  87                 reset {
  88                         label = "reset";
  89                         gpios = <&gpio0 10 1>;
  90                         linux,code = <0x198>;
  91                 };
  92                 wps {
  93                         label = "wps";
  94                         gpios = <&gpio0 0 1>;
  95                         linux,code = <0x211>;
  96                 };
  97         };
  98
  99         wmac@10180000 {
 100                 status = "okay";
 101         };
 102
 103         otg@101c0000 {
 104                 status = "okay";
 105         };
 106 };