target/linux/ramips/dts/MZK-W300NH2.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "MZK-W300NH2", "ralink,rt3052-soc";
   7         model = "Planex MZK-W300NH2";
   8
   9         palmbus@10000000 {
  10                 sysc@0 {
  11                         ralink,pinmux = "uartlite", "mdio", "sdram", "rgmii";
  12                         ralink,gpiomux = "i2c", "spi", "jtag";
  13                         ralink,uartmux = "gpio";
  14                         ralink,wdtmux = <1>;
  15                 };
  16
  17                 gpio0: gpio@600 {
  18                         status = "okay";
  19                 };
  20         };
  21
  22         cfi@1f000000 {
  23                 compatible = "cfi-flash";
  24                 reg = <0x1f000000 0x800000>;
  25
  26                 bank-width = <2>;
  27                 device-width = <2>;
  28                 #address-cells = <1>;
  29                 #size-cells = <1>;
  30
  31                 partition@0 {
  32                         label = "u-boot";
  33                         reg = <0x0 0x30000>;
  34                         read-only;
  35                 };
  36
  37                 partition@30000 {
  38                         label = "u-boot-env";
  39                         reg = <0x30000 0x10000>;
  40                         read-only;
  41                 };
  42
  43                 factory: partition@40000 {
  44                         label = "factory";
  45                         reg = <0x40000 0x10000>;
  46                         read-only;
  47                 };
  48
  49                 partition@3e0000 {
  50                         label = "cimage";
  51                         reg = <0x3e0000 0x20000>;
  52                         read-only;
  53                 };
  54
  55                 partition@50000 {
  56                         label = "firmware";
  57                         reg = <0x50000 0x390000>;
  58                 };
  59         };
  60
  61         ethernet@10100000 {
  62                 status = "okay";
  63         };
  64
  65         esw@10110000 {
  66                 status = "okay";
  67                 ralink,portmap = <0x2f>;
  68         };
  69
  70         gpio-leds {
  71                 compatible = "gpio-leds";
  72                 power {
  73                         label = "mzkw300nh2:green:power";
  74                         gpios = <&gpio0 9 1>;
  75                 };
  76                 wlan {
  77                         label = "mzkw300nh2:amber:wlan";
  78                         gpios = <&gpio0 14 1>;
  79                 };
  80                 wps {
  81                         label = "mzkw300nh2:amber:wps";
  82                         gpios = <&gpio0 11 1>;
  83                 };
  84         };
  85
  86         gpio-keys-polled {
  87                 compatible = "gpio-keys-polled";
  88                 #address-cells = <1>;
  89                 #size-cells = <0>;
  90                 poll-interval = <20>;
  91                 wps {
  92                         label = "wps";
  93                         gpios = <&gpio0 12 1>;
  94                         linux,code = <0x211>;
  95                 };
  96                 reset {
  97                         label = "reset";
  98                         gpios = <&gpio0 0 1>;
  99                         linux,code = <0x198>;
 100                 };
 101                 rt {
 102                         label = "rt";
 103                         gpios = <&gpio0 13 1>;
 104                         linux,code = <0x100>;
 105                 };
 106         };
 107
 108         wmac@10180000 {
 109                 status = "okay";
 110         };
 111 };