ramips: add support for Planex MZK-EX300NP
[openwrt.git] / target / linux / ramips / dts / MZK-EX300NP.dts
1 /dts-v1/;
2
3 /include/ "mt7620a.dtsi"
4
5 / {
6         compatible = "ralink,mt7620a-soc";
7         model = "Planex MZK-EX300NP";
8
9         palmbus@10000000 {
10                 gpio1: gpio@638 {
11                         status = "okay";
12                 };
13
14                 gpio3: gpio@688 {
15                         status = "okay";
16                 };
17
18                 spi@b00 {
19                         status = "okay";
20
21                         m25p80@0 {
22                                 #address-cells = <1>;
23                                 #size-cells = <1>;
24                                 compatible = "jedec,spi-nor";
25                                 reg = <0 0>;
26                                 linux,modalias = "m25p80", "w25q64";
27                                 spi-max-frequency = <10000000>;
28
29                                 partition@0 {
30                                         label = "u-boot";
31                                         reg = <0x0 0x30000>;
32                                         read-only;
33                                 };
34
35                                 partition@30000 {
36                                         label = "u-boot-env";
37                                         reg = <0x30000 0x10000>;
38                                         read-only;
39                                 };
40
41                                 factory: partition@40000 {
42                                         label = "factory";
43                                         reg = <0x40000 0x10000>;
44                                         read-only;
45                                 };
46
47                                 partition@50000 {
48                                         label = "firmware";
49                                         reg = <0x50000 0x730000>;
50                                 };
51
52                                 partition@780000 {
53                                         label = "Udata";
54                                         reg = <0x780000 0x80000>;
55                                 };
56                         };
57                 };
58         };
59
60         pinctrl {
61                 state_default: pinctrl0 {
62                         gpio {
63                                 ralink,group = "i2c", "spi refclk", "rgmii1", "wled";
64                                 ralink,function = "gpio";
65                         };
66                 };
67         };
68
69         ethernet@10100000 {
70                 pinctrl-names = "default";
71                 pinctrl-0 = <&ephy_pins>;
72                 mtd-mac-address = <&factory 0x4>;
73                 mediatek,portmap = "llllw";
74         };
75
76         wmac@10180000 {
77                 ralink,mtd-eeprom = <&factory 0>;
78         };
79
80         gpio-leds {
81                 compatible = "gpio-leds";
82
83                 wifi {
84                         label = "mzk-ex300np:green:wifi";
85                         gpios = <&gpio3 0 1>;
86                 };
87
88                 wps {
89                         label = "mzk-ex300np:green:wps";
90                         gpios = <&gpio1 5 1>;
91                 };
92
93                 rep {
94                         label = "mzk-ex300np:blue:rep";
95                         gpios = <&gpio1 4 1>;
96                 };
97
98                 wifi1 {
99                         label = "mzk-ex300np:blue:wifi1";
100                         gpios = <&gpio1 1 1>;
101                 };
102
103                 wifi2 {
104                         label = "mzk-ex300np:blue:wifi2";
105                         gpios = <&gpio1 2 1>;
106                 };
107
108                 wifi3 {
109                         label = "mzk-ex300np:blue:wifi3";
110                         gpios = <&gpio1 0 1>;
111                 };
112         };
113
114         gpio-keys-polled {
115                 compatible = "gpio-keys-polled";
116                 #address-cells = <1>;
117                 #size-cells = <0>;
118                 poll-interval = <20>;
119
120                 reset {
121                         label = "reset";
122                         gpios = <&gpio0 1 1>;
123                         linux,code = <0x198>;
124                 };
125
126                 wps {
127                         label = "wps";
128                         gpios = <&gpio1 3 0>;
129                         linux,code = <0x211>;
130                 };
131         };
132 };