target/linux/ramips/dts/MZK-EX300NP.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 / {
   6         compatible = "ralink,mt7620a-soc";
   7         model = "Planex MZK-EX300NP";
   8
   9         palmbus@10000000 {
  10                 gpio1: gpio@638 {
  11                         status = "okay";
  12                 };
  13
  14                 gpio3: gpio@688 {
  15                         status = "okay";
  16                 };
  17
  18                 spi@b00 {
  19                         status = "okay";
  20
  21                         m25p80@0 {
  22                                 #address-cells = <1>;
  23                                 #size-cells = <1>;
  24                                 compatible = "jedec,spi-nor";
  25                                 reg = <0 0>;
  26                                 linux,modalias = "m25p80", "w25q64";
  27                                 spi-max-frequency = <10000000>;
  28
  29                                 partition@0 {
  30                                         label = "u-boot";
  31                                         reg = <0x0 0x30000>;
  32                                         read-only;
  33                                 };
  34
  35                                 partition@30000 {
  36                                         label = "u-boot-env";
  37                                         reg = <0x30000 0x10000>;
  38                                         read-only;
  39                                 };
  40
  41                                 factory: partition@40000 {
  42                                         label = "factory";
  43                                         reg = <0x40000 0x10000>;
  44                                         read-only;
  45                                 };
  46
  47                                 partition@50000 {
  48                                         label = "firmware";
  49                                         reg = <0x50000 0x730000>;
  50                                 };
  51
  52                                 partition@780000 {
  53                                         label = "Udata";
  54                                         reg = <0x780000 0x80000>;
  55                                 };
  56                         };
  57                 };
  58         };
  59
  60         pinctrl {
  61                 state_default: pinctrl0 {
  62                         gpio {
  63                                 ralink,group = "i2c", "spi refclk", "rgmii1", "wled";
  64                                 ralink,function = "gpio";
  65                         };
  66                 };
  67         };
  68
  69         ethernet@10100000 {
  70                 pinctrl-names = "default";
  71                 pinctrl-0 = <&ephy_pins>;
  72                 mtd-mac-address = <&factory 0x4>;
  73                 mediatek,portmap = "llllw";
  74         };
  75
  76         wmac@10180000 {
  77                 ralink,mtd-eeprom = <&factory 0>;
  78         };
  79
  80         gpio-leds {
  81                 compatible = "gpio-leds";
  82
  83                 wifi {
  84                         label = "mzk-ex300np:green:wifi";
  85                         gpios = <&gpio3 0 1>;
  86                 };
  87
  88                 wps {
  89                         label = "mzk-ex300np:green:wps";
  90                         gpios = <&gpio1 5 1>;
  91                 };
  92
  93                 rep {
  94                         label = "mzk-ex300np:blue:rep";
  95                         gpios = <&gpio1 4 1>;
  96                 };
  97
  98                 wifi1 {
  99                         label = "mzk-ex300np:blue:wifi1";
 100                         gpios = <&gpio1 1 1>;
 101                 };
 102
 103                 wifi2 {
 104                         label = "mzk-ex300np:blue:wifi2";
 105                         gpios = <&gpio1 2 1>;
 106                 };
 107
 108                 wifi3 {
 109                         label = "mzk-ex300np:blue:wifi3";
 110                         gpios = <&gpio1 0 1>;
 111                 };
 112         };
 113
 114         gpio-keys-polled {
 115                 compatible = "gpio-keys-polled";
 116                 #address-cells = <1>;
 117                 #size-cells = <0>;
 118                 poll-interval = <20>;
 119
 120                 reset {
 121                         label = "reset";
 122                         gpios = <&gpio0 1 1>;
 123                         linux,code = <0x198>;
 124                 };
 125
 126                 wps {
 127                         label = "wps";
 128                         gpios = <&gpio1 3 0>;
 129                         linux,code = <0x211>;
 130                 };
 131         };
 132 };