ramips: Change all '/include/' clauses to '#include' so preprocessing can be done...
[openwrt.git] / target / linux / ramips / dts / MOFI3500-3GN.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 / {
6         compatible = "MOFI3500-3GN", "ralink,rt3052-soc";
7         model = "MoFi Network MOFI3500-3GN";
8
9         pinctrl {
10                 state_default: pinctrl0 {
11                         gpio {
12                                 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
13                                 ralink,function = "gpio";
14                         };
15                 };
16         };
17
18         cfi@1f000000 {
19                 compatible = "cfi-flash";
20                 reg = <0x1f000000 0x800000>;
21                 bank-width = <2>;
22                 device-width = <2>;
23                 #address-cells = <1>;
24                 #size-cells = <1>;
25
26                 partition@0 {
27                         label = "u-boot";
28                         reg = <0x0 0x30000>;
29                         read-only;
30                 };
31
32                 partition@30000 {
33                         label = "u-boot-env";
34                         reg = <0x30000 0x10000>;
35                         read-only;
36                 };
37
38                 factory: partition@40000 {
39                         label = "factory";
40                         reg = <0x40000 0x10000>;
41                         read-only;
42                 };
43
44                 partition@50000 {
45                         label = "firmware";
46                         reg = <0x50000 0x7b0000>;
47                 };
48         };
49
50         esw@10110000 {
51                 mediatek,portmap = <0x2f>;
52         };
53
54         gpio-leds {
55                 compatible = "gpio-leds";
56
57                 usb {
58                         label = "mofi3500-3gn:green:usb";
59                         gpios = <&gpio0 8 1>;
60                 };
61
62                 3g {
63                         label = "mofi3500-3gn:green:3g";
64                         gpios = <&gpio0 11 1>;
65                 };
66
67                 status {
68                         label = "mofi3500-3gn:green:status";
69                         gpios = <&gpio0 12 1>;
70                 };
71
72                 wps {
73                         label = "mofi3500-3gn:green:wps";
74                         gpios = <&gpio0 14 1>;
75                 };
76         };
77
78         gpio-keys-polled {
79                 compatible = "gpio-keys-polled";
80                 #address-cells = <1>;
81                 #size-cells = <0>;
82                 poll-interval = <20>;
83
84                 reset {
85                         label = "reset";
86                         gpios = <&gpio0 10 1>;
87                         linux,code = <0x198>;
88                 };
89
90                 connect {
91                         label = "connect";
92                         gpios = <&gpio0 7 1>;
93                         linux,code = <0xda>;
94                 };
95
96                 wps {
97                         label = "wps";
98                         gpios = <&gpio0 0 1>;
99                         linux,code = <0x211>;
100                 };
101         };
102
103         wmac@10180000 {
104                 status = "okay";
105                 ralink,mtd-eeprom = <&factory 0>;
106         };
107
108         otg@101c0000 {
109                 status = "okay";
110         };
111 };