target/linux/ramips/dts/MINIEMBPLUG.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 / {
   6         compatible = "MINIEMBPLUG", "ralink,rt5350-soc";
   7         model = "Omnima MiniEMBPlug";
   8
   9         pinctrl {
  10                 state_default: pinctrl0 {
  11                         gpio {
  12                                 ralink,group = "i2c", "jtag", "uartf";
  13                                 ralink,function = "gpio";
  14                         };
  15                 };
  16         };
  17
  18         gpio-leds {
  19                 compatible = "gpio-leds";
  20
  21                 wlan {
  22                         label = "miniembplug:red:wlan";
  23                         gpios = <&gpio0 9 0>;
  24                 };
  25
  26                 mobile {
  27                         label = "miniembplug:green:mobile";
  28                         gpios = <&gpio0 13 1>;
  29                 };
  30         };
  31
  32         gpio-keys-polled {
  33                 compatible = "gpio-keys-polled";
  34                 #address-cells = <1>;
  35                 #size-cells = <0>;
  36                 poll-interval = <20>;
  37
  38                 wps {
  39                         label = "wps";
  40                         gpios = <&gpio0 0 1>;
  41                         linux,code = <0x211>;
  42                 };
  43
  44                 reset {
  45                         label = "reset";
  46                         gpios = <&gpio0 10 1>;
  47                         linux,code = <0x211>;
  48                 };
  49
  50                 mode-one {
  51                         label = "mode1";
  52                         gpios = <&gpio0 11 1>;
  53                         linux,code = <0x211>;
  54                 };
  55
  56                 mode-two {
  57                         label = "mode2";
  58                         gpios = <&gpio0 12 1>;
  59                         linux,code = <0x211>;
  60                 };
  61         };
  62
  63         palmbus@10000000 {
  64                 gpio0: gpio@600 {
  65                         status = "okay";
  66                 };
  67
  68                 spi@b00 {
  69                         status = "okay";
  70
  71                         m25p80@0 {
  72                                 #address-cells = <1>;
  73                                 #size-cells = <1>;
  74                                 compatible = "jedec,spi-nor";
  75                                 reg = <0 0>;
  76                                 linux,modalias = "m25p80", "mx25l6405d";
  77                                 spi-max-frequency = <10000000>;
  78
  79                                 partition@0 {
  80                                         label = "u-boot";
  81                                         reg = <0x0 0x30000>;
  82                                         read-only;
  83                                 };
  84
  85                                 partition@30000 {
  86                                         label = "u-boot-env";
  87                                         reg = <0x30000 0x10000>;
  88                                         read-only;
  89                                 };
  90
  91                                 factory: partition@40000 {
  92                                         label = "factory";
  93                                         reg = <0x40000 0x10000>;
  94                                         read-only;
  95                                 };
  96
  97                                 partition@50000 {
  98                                         label = "firmware";
  99                                         reg = <0x50000 0x7b0000>;
 100                                 };
 101                         };
 102                 };
 103         };
 104
 105         ethernet@10100000 {
 106                 mtd-mac-address = <&factory 0x4>;
 107         };
 108
 109         esw@10110000 {
 110                 mediatek,portmap = <0x2f>;
 111         };
 112
 113         wmac@10180000 {
 114                 ralink,mtd-eeprom = <&factory 0>;
 115         };
 116
 117         otg@101c0000 {
 118                 status = "okay";
 119         };
 120 };