[ramips] move memory detect node to dtsi files
[openwrt.git] / target / linux / ramips / dts / HW550-3G.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6         compatible = "HW550-3G", "ralink,rt3052-soc";
7         model = "Aztech HW550-3G";
8
9         palmbus@10000000 {
10                 sysc@0 {
11                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii";
12                         ralink,gpiomux = "mdio";
13                         ralink,uartmux = "gpio";
14                         ralink,wdtmux = <1>;
15                 };
16
17                 gpio0: gpio@600 {
18                         status = "okay";
19                 };
20
21         };
22
23         cfi@1f000000 {
24                 compatible = "cfi-flash";
25                 reg = <0x1f000000 0x800000>;
26
27                 bank-width = <2>;
28                 device-width = <2>;
29                 #address-cells = <1>;
30                 #size-cells = <1>;
31
32                 partition@0 {
33                         label = "u-boot";
34                         reg = <0x0 0x30000>;
35                         read-only;
36                 };
37
38                 partition@30000 {
39                         label = "u-boot-env";
40                         reg = <0x30000 0x10000>;
41                         read-only;
42                 };
43
44                 factory: partition@40000 {
45                         label = "factory";
46                         reg = <0x40000 0x10000>;
47                         read-only;
48                 };
49
50                 partition@50000 {
51                         label = "firmware";
52                         reg = <0x50000 0x7b0000>;
53                 };
54         };
55
56         ethernet@10100000 {
57                 status = "okay";
58         };
59
60         esw@10110000 {
61                 status = "okay";
62                 ralink,portmap = <0x3e>;
63         };
64
65         gpio-leds {
66                 compatible = "gpio-leds";
67                 usb {
68                         label = "hw550-3g:green:usb";
69                         gpios = <&gpio0 8 1>;
70                 };
71                 3g {
72                         label = "hw550-3g:green:3g";
73                         gpios = <&gpio0 11 1>;
74                 };
75                 status {
76                         label = "hw550-3g:green:status";
77                         gpios = <&gpio0 12 1>;
78                 };
79                 wps {
80                         label = "hw550-3g:green:wps";
81                         gpios = <&gpio0 14 1>;
82                 };
83         };
84
85         gpio-keys-polled {
86                 compatible = "gpio-keys-polled";
87                 #address-cells = <1>;
88                 #size-cells = <0>;
89                 poll-interval = <20>;
90                 reset {
91                         label = "reset";
92                         gpios = <&gpio0 10 1>;
93                         linux,code = <0x198>;
94                 };
95                 connect {
96                         label = "connect";
97                         gpios = <&gpio0 7 1>;
98                         linux,code = <0xda>;
99                 };
100                 wps {
101                         label = "wps";
102                         gpios = <&gpio0 0 1>;
103                         linux,code = <0x211>;
104                 };
105         };
106
107         wmac@10180000 {
108                 status = "okay";
109         };
110
111         otg@101c0000 {
112                 status = "okay";
113         };
114 };