target/linux/ramips/dts/FONERA20N.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "FONERA20N", "ralink,rt3052-soc";
   7         model = "La Fonera 2.0N";
   8
   9         memorydetect {
  10                 ralink,memory = <0x0 0x200000 0x4000000>;
  11         };
  12
  13         palmbus@10000000 {
  14                 sysc@0 {
  15                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  16                         ralink,uartmux = "gpio";
  17                         ralink,wdtmux = <1>;
  18                 };
  19
  20                 gpio0: gpio@600 {
  21                         status = "okay";
  22                 };
  23
  24         };
  25
  26         cfi@1f000000 {
  27                 compatible = "cfi-flash";
  28                 reg = <0x1f000000 0x800000>;
  29
  30                 bank-width = <2>;
  31                 device-width = <2>;
  32                 #address-cells = <1>;
  33                 #size-cells = <1>;
  34
  35                 partition@0 {
  36                         label = "u-boot";
  37                         reg = <0x0 0x30000>;
  38                         read-only;
  39                 };
  40
  41                 partition@30000 {
  42                         label = "u-boot-env";
  43                         reg = <0x30000 0x10000>;
  44                         read-only;
  45                 };
  46
  47                 factory: partition@40000 {
  48                         label = "factory";
  49                         reg = <0x40000 0x10000>;
  50                         read-only;
  51                 };
  52
  53                 partition@50000 {
  54                         label = "firmware";
  55                         reg = <0x50000 0x7b0000>;
  56                 };
  57         };
  58
  59         gpio-leds {
  60                 compatible = "gpio-leds";
  61                 wifi {
  62                         label = "fonera20n:orange:wifi";
  63                         gpios = <&gpio0 7 1>;
  64                 };
  65                 power {
  66                         label = "fonera20n:green:power";
  67                         gpios = <&gpio0 9 1>;
  68                 };
  69                 usb {
  70                         label = "fonera20n:orange:usb";
  71                         gpios = <&gpio0 14 1>;
  72                 };
  73         };
  74
  75         gpio-keys-polled {
  76                 compatible = "gpio-keys-polled";
  77                 #address-cells = <1>;
  78                 #size-cells = <0>;
  79                 poll-interval = <20>;
  80                 reset {
  81                         label = "reset";
  82                         gpios = <&gpio0 12 1>;
  83                         linux,code = <0x198>;
  84                 };
  85                 switch {
  86                         label = "switch";
  87                         gpios = <&gpio0 13 1>;
  88                         linux,code = <0x101>;
  89                 };
  90         };
  91
  92         ethernet@10100000 {
  93                 status = "okay";
  94         };
  95
  96         esw@10110000 {
  97                 status = "okay";
  98                 ralink,portmap = <0x2f>;
  99
 100                 port@0 {
 101                         conpatible = "swconfig,port";
 102                         swconfig,segment = "lan";
 103                         swconfig,portmap = <0 4>;
 104                 };
 105                 port@1 {
 106                         conpatible = "swconfig,port";
 107                         swconfig,segment = "lan";
 108                         swconfig,portmap = <1 3>;
 109                 };
 110                 port@2 {
 111                         conpatible = "swconfig,port";
 112                         swconfig,segment = "lan";
 113                         swconfig,portmap = <2 2>;
 114                 };
 115                 port@3 {
 116                         conpatible = "swconfig,port";
 117                         swconfig,segment = "lan";
 118                         swconfig,portmap = <3 1>;
 119                 };
 120                 port@4 {
 121                         conpatible = "swconfig,port";
 122                         swconfig,segment = "lan";
 123                         swconfig,portmap = <4 0>;
 124                 };
 125         };
 126
 127         wmac@10180000 {
 128                 status = "okay";
 129         };
 130
 131         otg@101c0000 {
 132                 status = "okay";
 133         };
 134 };