target/linux/ramips/dts/ESR-9753.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "ESR-9753", "ralink,rt3052-soc";
   7         model = "Senao / EnGenius ESR-9753";
   8
   9         memorydetect {
  10                 ralink,memory = <0x0 0x200000 0x4000000>;
  11         };
  12
  13         palmbus@10000000 {
  14                 sysc@0 {
  15                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  16                         ralink,uartmux = "gpio";
  17                         ralink,wdtmux = <1>;
  18                 };
  19
  20                 gpio0: gpio@600 {
  21                         status = "okay";
  22                 };
  23
  24         };
  25
  26         cfi@1f000000 {
  27                 compatible = "cfi-flash";
  28                 reg = <0x1f000000 0x800000>;
  29
  30                 bank-width = <2>;
  31                 device-width = <2>;
  32                 #address-cells = <1>;
  33                 #size-cells = <1>;
  34
  35                 partition@0 {
  36                         label = "u-boot";
  37                         reg = <0x0 0x30000>;
  38                         read-only;
  39                 };
  40
  41                 partition@30000 {
  42                         label = "u-boot-env";
  43                         reg = <0x30000 0x10000>;
  44                         read-only;
  45                 };
  46
  47                 factory: partition@40000 {
  48                         label = "factory";
  49                         reg = <0x40000 0x10000>;
  50                         read-only;
  51                 };
  52
  53                 partition@50000 {
  54                         label = "firmware";
  55                         reg = <0x50000 0x3b0000>;
  56                 };
  57         };
  58
  59         gpio-leds {
  60                 compatible = "gpio-leds";
  61                 power {
  62                         label = "esr-9753:orange:power";
  63                         gpios = <&gpio0 8 1>;
  64                 };
  65                 wps {
  66                         label = "esr-9753:orange:wps";
  67                         gpios = <&gpio0 14 1>;
  68                 };
  69         };
  70
  71         gpio-keys-polled {
  72                 compatible = "gpio-keys-polled";
  73                 #address-cells = <1>;
  74                 #size-cells = <0>;
  75                 poll-interval = <20>;
  76                 reset {
  77                         label = "reset";
  78                         gpios = <&gpio0 10 1>;
  79                         linux,code = <0x198>;
  80                 };
  81                 wps {
  82                         label = "wps";
  83                         gpios = <&gpio0 0 1>;
  84                         linux,code = <0x211>;
  85                 };
  86         };
  87
  88         ethernet@10100000 {
  89                 status = "okay";
  90         };
  91
  92         esw@10110000 {
  93                 status = "okay";
  94                 ralink,portmap = <0x3e>;
  95         };
  96
  97         wmac@10180000 {
  98                 status = "okay";
  99         };
 100 };