target/linux/ramips/dts/DIR-860L-B1.dts

   1 /dts-v1/;
   2
   3 /include/ "mt7621.dtsi"
   4
   5 / {
   6         compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
   7         model = "D-Link DIR-860L B1";
   8
   9         memory@0 {
  10                 device_type = "memory";
  11                 reg = <0x0 0x8000000>;
  12         };
  13
  14         chosen {
  15                 bootargs = "console=ttyS0,57600";
  16         };
  17
  18         palmbus@1E000000 {
  19                 spi@b00 {
  20                         status = "okay";
  21
  22                         m25p80@0 {
  23                                 #address-cells = <1>;
  24                                 #size-cells = <1>;
  25                                 compatible = "mx25l12805d";
  26                                 reg = <0 0>;
  27                                 linux,modalias = "m25p80";
  28                                 spi-max-frequency = <10000000>;
  29
  30                                 partition@0 {
  31                                         label = "u-boot";
  32                                         reg = <0x0 0x30000>;
  33                                         read-only;
  34                                 };
  35
  36                                 partition@30000 {
  37                                         label = "u-boot-env";
  38                                         reg = <0x30000 0x4000>;
  39                                         read-only;
  40                                 };
  41
  42                                 radio: partition@34000 {
  43                                         label = "radio";
  44                                         reg = <0x34000 0x4000>;
  45                                         read-only;
  46                                 };
  47
  48                                 factory: partition@38000 {
  49                                         label = "factory";
  50                                         reg = <0x38000 0x8000>;
  51                                         read-only;
  52                                 };
  53
  54                                 partition@40000 {
  55                                         label = "defaults";
  56                                         reg = <0x40000 0x10000>;
  57                                         read-only;
  58                                 };
  59
  60                                 partition@50000 {
  61                                         label = "firmware";
  62                                         reg = <0x50000 0xfb0000>;
  63                                 };
  64                         };
  65                 };
  66         };
  67
  68         pcie@1e140000 {
  69                 status = "okay";
  70
  71                 pcie0 {
  72                         mt76@0,0 {
  73                                 reg = <0x0000 0 0 0 0>;
  74                                 device_type = "pci";
  75                                 mediatek,mtd-eeprom = <&radio 0>;
  76                                 mediatek,2ghz = <0>;
  77                         };
  78                 };
  79                 pcie1 {
  80                         mt76@1,0 {
  81                                 reg = <0x0000 0 0 0 0>;
  82                                 device_type = "pci";
  83                                 mediatek,mtd-eeprom = <&radio 0x2000>;
  84                                 mediatek,5ghz = <0>;
  85                         };
  86                 };
  87         };
  88
  89         pinctrl {
  90                 state_default: pinctrl0 {
  91                         gpio {
  92                                 ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
  93                                 ralink,function = "gpio";
  94                         };
  95                 };
  96         };
  97
  98         gpio-leds {
  99                 compatible = "gpio-leds";
 100         };
 101
 102         gpio-keys-polled {
 103                 compatible = "gpio-keys-polled";
 104                 #address-cells = <1>;
 105                 #size-cells = <0>;
 106                 poll-interval = <20>;
 107         };
 108 };