target/linux/ramips/dts/DIR-600-B2.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "DIR-600-B2", "ralink,rt3050-soc";
   7         model = "D-Link DIR-600 B2";
   8
   9         memorydetect {
  10                 ralink,memory = <0x0 0x200000 0x4000000>;
  11         };
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,3776k@0x50000(firmware)";
  15         };
  16
  17         palmbus@10000000 {
  18                 sysc@0 {
  19                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  20                         ralink,uartmux = "gpio";
  21                         ralink,wdtmux = <1>;
  22                 };
  23
  24                 gpio0: gpio@600 {
  25                         status = "okay";
  26                 };
  27         };
  28
  29         cfi@1f000000 {
  30                 compatible = "cfi-flash";
  31                 reg = <0x1f000000 0x800000>;
  32
  33                 bank-width = <2>;
  34                 device-width = <2>;
  35                 #address-cells = <1>;
  36                 #size-cells = <1>;
  37
  38                 partition@0 {
  39                         label = "u-boot";
  40                         reg = <0x0 0x30000>;
  41                         read-only;
  42                 };
  43
  44                 partition@30000 {
  45                         label = "devdata";
  46                         reg = <0x30000 0x10000>;
  47                         read-only;
  48                 };
  49
  50                 partition@40000 {
  51                         label = "devconf";
  52                         reg = <0x40000 0x10000>;
  53                         read-only;
  54                 };
  55
  56                 partition@50000 {
  57                         label = "firmware";
  58                         reg = <0x50000 0x3b0000>;
  59                 };
  60         };
  61
  62         ethernet@10100000 {
  63                 status = "okay";
  64         };
  65
  66         esw@10110000 {
  67                 status = "okay";
  68                 ralink,portmap = <0x2f>;
  69         };
  70
  71         gpio-keys-polled {
  72                 compatible = "gpio-keys-polled";
  73                 #address-cells = <1>;
  74                 #size-cells = <0>;
  75                 poll-interval = <20>;
  76                 reset {
  77                         label = "reset";
  78                         gpios = <&gpio0 10 1>;
  79                         linux,code = <0x198>;
  80                 };
  81                 wps {
  82                         label = "wps";
  83                         gpios = <&gpio0 0 1>;
  84                         linux,code = <0x211>;
  85                 };
  86         };
  87
  88         wmac@10180000 {
  89                 status = "okay";
  90         };
  91
  92         gpio-leds {
  93                 compatible = "gpio-leds";
  94                 status {
  95                         label = "d-link:amber:status";
  96                         gpios = <&gpio0 8 1>;
  97                 };
  98                 status2 {
  99                         label = "d-link:green:status";
 100                         gpios = <&gpio0 9 1>;
 101                 };
 102                 wan {
 103                         label = "d-link:amber:wan";
 104                         gpios = <&gpio0 14 1>;
 105                 };
 106                 wan2 {
 107                         label = "d-link:green:wan";
 108                         gpios = <&gpio0 12 1>;
 109                 };
 110                 wps {
 111                         label = "d-link:blue:wps";
 112                         gpios = <&gpio0 13 1>;
 113                 };
 114         };
 115 };