target/linux/ramips/dts/DIR-300-B1.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "DIR-300-B1", "ralink,rt3050-soc";
   7         model = "D-Link DIR-300 B1";
   8
   9         pinctrl {
  10                 state_default: pinctrl0 {
  11                         gpio {
  12                                 ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
  13                                 ralink,function = "gpio";
  14                         };
  15                 };
  16         };
  17
  18         cfi@1f000000 {
  19                 compatible = "cfi-flash";
  20                 reg = <0x1f000000 0x800000>;
  21
  22                 bank-width = <2>;
  23                 device-width = <2>;
  24                 #address-cells = <1>;
  25                 #size-cells = <1>;
  26
  27                 partition@0 {
  28                         label = "u-boot";
  29                         reg = <0x0 0x30000>;
  30                         read-only;
  31                 };
  32
  33                 partition@30000 {
  34                         label = "devdata";
  35                         reg = <0x30000 0x10000>;
  36                         read-only;
  37                 };
  38
  39                 partition@40000 {
  40                         label = "devconf";
  41                         reg = <0x40000 0x10000>;
  42                         read-only;
  43                 };
  44
  45                 partition@50000 {
  46                         label = "firmware";
  47                         reg = <0x50000 0x3b0000>;
  48                 };
  49         };
  50
  51         ethernet@10100000 {
  52                 mtd-mac-address = <&factory 0x4004>;
  53         };
  54
  55         esw@10110000 {
  56                 ralink,portmap = <0x2f>;
  57         };
  58
  59         gpio-keys-polled {
  60                 compatible = "gpio-keys-polled";
  61                 #address-cells = <1>;
  62                 #size-cells = <0>;
  63                 poll-interval = <20>;
  64                 reset {
  65                         label = "reset";
  66                         gpios = <&gpio0 10 1>;
  67                         linux,code = <0x198>;
  68                 };
  69                 wps {
  70                         label = "wps";
  71                         gpios = <&gpio0 0 1>;
  72                         linux,code = <0x211>;
  73                 };
  74         };
  75
  76         gpio-leds {
  77                 compatible = "gpio-leds";
  78                 status {
  79                         label = "d-link:amber:status";
  80                         gpios = <&gpio0 8 1>;
  81                 };
  82                 status2 {
  83                         label = "d-link:green:status";
  84                         gpios = <&gpio0 9 1>;
  85                 };
  86                 wan {
  87                         label = "d-link:amber:wan";
  88                         gpios = <&gpio0 14 1>;
  89                 };
  90                 wan2 {
  91                         label = "d-link:green:wan";
  92                         gpios = <&gpio0 12 1>;
  93                 };
  94                 wps {
  95                         label = "d-link:blue:wps";
  96                         gpios = <&gpio0 13 1>;
  97                 };
  98         };
  99 };