target/linux/ramips/dts/DIR-300-B1.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "DIR-300-B1", "ralink,rt3050-soc";
   7         model = "D-Link DIR-300 B1";
   8
   9         memorydetect {
  10                 ralink,memory = <0x0 0x200000 0x4000000>;
  11         };
  12
  13         palmbus@10000000 {
  14                 sysc@0 {
  15                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  16                         ralink,uartmux = "gpio";
  17                         ralink,wdtmux = <1>;
  18                 };
  19
  20                 gpio0: gpio@600 {
  21                         status = "okay";
  22                 };
  23
  24         };
  25
  26         cfi@1f000000 {
  27                 compatible = "cfi-flash";
  28                 reg = <0x1f000000 0x800000>;
  29
  30                 bank-width = <2>;
  31                 device-width = <2>;
  32                 #address-cells = <1>;
  33                 #size-cells = <1>;
  34
  35                 partition@0 {
  36                         label = "u-boot";
  37                         reg = <0x0 0x30000>;
  38                         read-only;
  39                 };
  40
  41                 partition@30000 {
  42                         label = "devdata";
  43                         reg = <0x30000 0x10000>;
  44                         read-only;
  45                 };
  46
  47                 partition@40000 {
  48                         label = "devconf";
  49                         reg = <0x40000 0x10000>;
  50                         read-only;
  51                 };
  52
  53                 partition@50000 {
  54                         label = "firmware";
  55                         reg = <0x50000 0x3b0000>;
  56                 };
  57         };
  58
  59         ethernet@10100000 {
  60                 status = "okay";
  61         };
  62
  63         esw@10110000 {
  64                 status = "okay";
  65                 ralink,portmap = <0x2f>;
  66         };
  67
  68         gpio-keys-polled {
  69                 compatible = "gpio-keys-polled";
  70                 #address-cells = <1>;
  71                 #size-cells = <0>;
  72                 poll-interval = <20>;
  73                 reset {
  74                         label = "reset";
  75                         gpios = <&gpio0 10 1>;
  76                         linux,code = <0x198>;
  77                 };
  78                 wps {
  79                         label = "wps";
  80                         gpios = <&gpio0 0 1>;
  81                         linux,code = <0x211>;
  82                 };
  83         };
  84
  85         wmac@10180000 {
  86                 status = "okay";
  87         };
  88
  89         gpio-leds {
  90                 compatible = "gpio-leds";
  91                 status {
  92                         label = "d-link:amber:status";
  93                         gpios = <&gpio0 8 1>;
  94                 };
  95                 status2 {
  96                         label = "d-link:green:status";
  97                         gpios = <&gpio0 9 1>;
  98                 };
  99                 wan {
 100                         label = "d-link:amber:wan";
 101                         gpios = <&gpio0 14 1>;
 102                 };
 103                 wan2 {
 104                         label = "d-link:green:wan";
 105                         gpios = <&gpio0 12 1>;
 106                 };
 107                 wps {
 108                         label = "d-link:blue:wps";
 109                         gpios = <&gpio0 13 1>;
 110                 };
 111         };
 112 };