target/linux/ramips/dts/DCS-930L-B1.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 / {
   6         compatible = "DCS-930L-B1", "ralink,rt5350-soc";
   7         model = "D-Link DCS-930L B1";
   8
   9         palmbus@10000000 {
  10                 spi@b00 {
  11                         status = "okay";
  12
  13                         m25p80@0 {
  14                                 #address-cells = <1>;
  15                                 #size-cells = <1>;
  16                                 compatible = "jedec,spi-nor";
  17                                 reg = <0 0>;
  18                                 linux,modalias = "m25p80", "s25fl064k";
  19                                 spi-max-frequency = <10000000>;
  20
  21                                 partition@0 {
  22                                         label = "u-boot";
  23                                         reg = <0x0 0x30000>;
  24                                         read-only;
  25                                 };
  26
  27                                 partition@30000 {
  28                                         label = "u-boot-env";
  29                                         reg = <0x30000 0x10000>;
  30                                         read-only;
  31                                 };
  32
  33                                 factory: partition@40000 {
  34                                         label = "factory";
  35                                         reg = <0x40000 0x10000>;
  36                                         read-only;
  37                                 };
  38
  39                                 partition@50000 {
  40                                         label = "firmware";
  41                                         reg = <0x50000 0x3b0000>;
  42                                 };
  43                         };
  44                 };
  45         };
  46
  47         pinctrl {
  48                 state_default: pinctrl0 {
  49                         gpio {
  50                                 ralink,group = "i2c", "jtag", "uartf", "led";
  51                                 ralink,function = "gpio";
  52                         };
  53                 };
  54         };
  55
  56         ethernet@10100000 {
  57                 mtd-mac-address = <&factory 0x4>;
  58         };
  59
  60         esw@10110000 {
  61                 mediatek,portmap = <0x2f>;
  62         };
  63
  64         wmac@10180000 {
  65                 ralink,mtd-eeprom = <&factory 0>;
  66         };
  67
  68         ehci@101c0000 {
  69                 status = "okay";
  70         };
  71
  72         ohci@101c1000 {
  73                 status = "okay";
  74         };
  75
  76         gpio-leds {
  77                 compatible = "gpio-leds";
  78
  79                 power {
  80                         label = "dcs-930l-b1:red:power";
  81                         gpios = <&gpio0 17 1>;
  82                 };
  83
  84                 wps {
  85                         label = "dcs-930l-b1:blue:wps";
  86                         gpios = <&gpio0 19 1>;
  87                 };
  88         };
  89
  90         gpio-keys-polled {
  91                 compatible = "gpio-keys-polled";
  92                 #address-cells = <1>;
  93                 #size-cells = <0>;
  94                 poll-interval = <20>;
  95
  96                 reset {
  97                         label = "reset";
  98                         gpios = <&gpio0 0 1>;
  99                         linux,code = <0x198>;
 100                 };
 101
 102                 wps {
 103                         label = "wps";
 104                         gpios = <&gpio0 20 1>;
 105                         linux,code = <0x211>;
 106                 };
 107         };
 108 };