target/linux/ramips/dts/DAP-1350.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "DAP-1350", "ralink,rt3052-soc";
   7         model = "D-Link DAP-1350";
   8
   9         memorydetect {
  10                 ralink,memory = <0x0 0x200000 0x4000000>;
  11         };
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200";
  15         };
  16
  17         palmbus@10000000 {
  18                 sysc@0 {
  19                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  20                         ralink,uartmux = "gpio";
  21                         ralink,wdtmux = <1>;
  22                 };
  23
  24                 gpio0: gpio@600 {
  25                         status = "okay";
  26                 };
  27
  28         };
  29
  30         cfi@1f000000 {
  31                 compatible = "cfi-flash";
  32                 reg = <0x1f000000 0x800000>;
  33
  34                 bank-width = <2>;
  35                 device-width = <2>;
  36                 #address-cells = <1>;
  37                 #size-cells = <1>;
  38
  39                 partition@0 {
  40                         label = "u-boot";
  41                         reg = <0x0 0x30000>;
  42                         read-only;
  43                 };
  44
  45                 partition@30000 {
  46                         label = "devdata";
  47                         reg = <0x30000 0x10000>;
  48                         read-only;
  49                 };
  50
  51                 partition@40000 {
  52                         label = "devconf";
  53                         reg = <0x40000 0x30000>;
  54                         read-only;
  55                 };
  56
  57                 partition@70000 {
  58                         label = "devlang";
  59                         reg = <0x70000 0x40000>;
  60                         read-only;
  61                 };
  62
  63                 partition@b0000 {
  64                         label = "firmware";
  65                         reg = <0xb0000 0x750000>;
  66                 };
  67         };
  68
  69         ethernet@10100000 {
  70                 status = "okay";
  71         };
  72
  73         esw@10110000 {
  74                 status = "okay";
  75                 ralink,portmap = <0x2f>;
  76         };
  77
  78         gpio-leds {
  79                 compatible = "gpio-leds";
  80                 power {
  81                         label = "d-link:blue:power";
  82                         gpios = <&gpio0 8 1>;
  83                 };
  84                 power2 {
  85                         label = "d-link:red:power";
  86                         gpios = <&gpio0 9 1>;
  87                 };
  88                 wps {
  89                         label = "d-link:blue:wps";
  90                         gpios = <&gpio0 14 1>;
  91                 };
  92         };
  93
  94         gpio-keys-polled {
  95                 compatible = "gpio-keys-polled";
  96                 #address-cells = <1>;
  97                 #size-cells = <0>;
  98                 poll-interval = <20>;
  99                 reset {
 100                         label = "reset";
 101                         gpios = <&gpio0 10 1>;
 102                         linux,code = <0x198>;
 103                 };
 104                 wps {
 105                         label = "wps";
 106                         gpios = <&gpio0 0 1>;
 107                         linux,code = <0x211>;
 108                 };
 109                 rt {
 110                         label = "rt";
 111                         gpios = <&gpio0 11 1>;
 112                         linux,code = <0x100>;
 113                 };
 114                 ap {
 115                         label = "ap";
 116                         gpios = <&gpio0 7 1>;
 117                         linux,code = <0x101>;
 118                 };
 119         };
 120
 121         wmac@10180000 {
 122                 status = "okay";
 123         };
 124
 125         otg@101c0000 {
 126                 status = "okay";
 127         };
 128 };