[ramips] add ofpart info to the devicetrees
[openwrt.git] / target / linux / ramips / dts / BROADWAY.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6         compatible = "BROADWAY", "ralink,rt3052-soc";
7         model = "Hauppauge Broadway";
8
9         memorydetect {
10                 ralink,memory = <0x0 0x200000 0x4000000>;
11         };
12
13         chosen {
14                 bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(bootloader)ro,64k(config)ro,64k(factory)ro,7744k@0x50000(firmware)";
15         };
16
17         palmbus@10000000 {
18                 sysc@0 {
19                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
20                         ralink,uartmux = "gpio";
21                         ralink,wdtmux = <1>;
22                 };
23
24                 gpio0: gpio@600 {
25                         status = "okay";
26                 };
27
28         };
29
30         cfi@1f000000 {
31                 compatible = "cfi-flash";
32                 reg = <0x1f000000 0x800000>;
33
34                 bank-width = <2>;
35                 device-width = <2>;
36                 #address-cells = <1>;
37                 #size-cells = <1>;
38
39                 partition@0 {
40                         label = "bootloader";
41                         reg = <0x0 0x30000>;
42                         read-only;
43                 };
44
45                 partition@30000 {
46                         label = "config";
47                         reg = <0x30000 0x10000>;
48                         read-only;
49                 };
50
51                 factory: partition@40000 {
52                         label = "factory";
53                         reg = <0x40000 0x10000>;
54                         read-only;
55                 };
56
57                 partition@50000 {
58                         label = "firmware";
59                         reg = <0x50000 0x790000>;
60                 };
61         };
62
63         ethernet@10100000 {
64                 status = "okay";
65         };
66
67         esw@10110000 {
68                 status = "okay";
69                 ralink,portmap = <0x3e>;
70         };
71
72         gpio-leds {
73                 compatible = "gpio-leds";
74                 diskmounted {
75                         label = "red:diskmounted";
76                         gpios = <&gpio0 9 1>;
77                 };
78                 wps_active {
79                         label = "red:wps_active";
80                         gpios = <&gpio0 14 1>;
81                 };
82         };
83
84         gpio-keys-polled {
85                 compatible = "gpio-keys-polled";
86                 #address-cells = <1>;
87                 #size-cells = <0>;
88                 poll-interval = <20>;
89                 factory {
90                         label = "Factory Reset button";
91                         gpios = <&gpio0 13 1>;
92                         linux,code = <0x198>;
93                 };
94         };
95
96         wmac@10180000 {
97                 status = "okay";
98         };
99
100         otg@101c0000 {
101                 status = "okay";
102         };
103 };