target/linux/ramips/dts/BC2.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 / {
   6         compatible = "BC2", "ralink,rt3052-soc";
   7         model = "NexAira BC2";
   8
   9         pinctrl {
  10                 state_default: pinctrl0 {
  11                         gpio {
  12                                 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  13                                 ralink,function = "gpio";
  14                         };
  15                 };
  16         };
  17
  18         cfi@1f000000 {
  19                 compatible = "cfi-flash";
  20                 reg = <0x1f000000 0x800000>;
  21                 bank-width = <2>;
  22                 device-width = <2>;
  23                 #address-cells = <1>;
  24                 #size-cells = <1>;
  25
  26                 partition@0 {
  27                         label = "u-boot";
  28                         reg = <0x0 0x30000>;
  29                         read-only;
  30                 };
  31
  32                 partition@30000 {
  33                         label = "u-boot-env";
  34                         reg = <0x30000 0x10000>;
  35                         read-only;
  36                 };
  37
  38                 factory: partition@40000 {
  39                         label = "factory";
  40                         reg = <0x40000 0x10000>;
  41                         read-only;
  42                 };
  43
  44                 partition@50000 {
  45                         label = "firmware";
  46                         reg = <0x50000 0x7b0000>;
  47                 };
  48         };
  49
  50         gpio-leds {
  51                 compatible = "gpio-leds";
  52
  53                 usb {
  54                         label = "bc2:blue:usb";
  55                         gpios = <&gpio0 20 1>;
  56                 };
  57         };
  58
  59         gpio-keys-polled {
  60                 compatible = "gpio-keys-polled";
  61                 #address-cells = <1>;
  62                 #size-cells = <0>;
  63                 poll-interval = <20>;
  64
  65                 reset {
  66                         label = "reset";
  67                         gpios = <&gpio0 17 1>;
  68                         linux,code = <0x198>;
  69                 };
  70         };
  71
  72         ethernet@10100000 {
  73                 mtd-mac-address = <&factory 0x4>;
  74         };
  75
  76         esw@10110000 {
  77                 mediatek,portmap = <0x2f>;
  78         };
  79
  80         wmac@10180000 {
  81                 ralink,mtd-eeprom = <&factory 0>;
  82         };
  83
  84         otg@101c0000 {
  85                 status = "okay";
  86         };
  87 };