target/linux/ramips/dts/ARGUS_ATP52B.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "ARGUS_ATP52B", "ralink,rt3052-soc";
   7         model = "Argus ATP-52B";
   8
   9         palmbus@10000000 {
  10                 sysc@0 {
  11                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  12                         ralink,uartmux = "gpio";
  13                         ralink,wdtmux = <1>;
  14                 };
  15
  16                 gpio0: gpio@600 {
  17                         status = "okay";
  18                 };
  19
  20         };
  21
  22         cfi@1f000000 {
  23                 compatible = "cfi-flash";
  24                 reg = <0x1f000000 0x800000>;
  25
  26                 bank-width = <2>;
  27                 device-width = <2>;
  28                 #address-cells = <1>;
  29                 #size-cells = <1>;
  30
  31                 partition@0 {
  32                         label = "bootloader";
  33                         reg = <0x0 0x30000>;
  34                         read-only;
  35                 };
  36
  37                 partition@30000 {
  38                         label = "config";
  39                         reg = <0x30000 0x10000>;
  40                 };
  41
  42                 factory: partition@40000 {
  43                         label = "factory";
  44                         reg = <0x40000 0x10000>;
  45                 };
  46
  47                 partition@50000 {
  48                         label = "firmware";
  49                         reg = <0x50000 0x7a0000>;
  50                 };
  51         };
  52
  53         gpio-leds {
  54                 compatible = "gpio-leds";
  55                 run {
  56                         label = "argus-atp52b:green:run";
  57                         gpios = <&gpio0 9 1>;
  58                 };
  59                 net {
  60                         label = "argus-atp52b:amber:net";
  61                         gpios = <&gpio0 13 1>;
  62                 };
  63         };
  64
  65         gpio-keys-polled {
  66                 compatible = "gpio-keys-polled";
  67                 #address-cells = <1>;
  68                 #size-cells = <0>;
  69                 poll-interval = <20>;
  70                 wps {
  71                         label = "wps";
  72                         gpios = <&gpio0 0 1>;
  73                         linux,code = <0x211>;
  74                 };
  75                 reset {
  76                         label = "reset";
  77                         gpios = <&gpio0 10 1>;
  78                         linux,code = <0x198>;
  79                 };
  80         };
  81
  82         ethernet@10100000 {
  83                 status = "okay";
  84         };
  85
  86         esw@10110000 {
  87                 status = "okay";
  88                 ralink,portmap = <0x3e>;
  89         };
  90
  91         wmac@10180000 {
  92                 status = "okay";
  93         };
  94
  95         otg@101c0000 {
  96                 status = "okay";
  97         };
  98 };