ramips: select kmod-rt2800-soc by default (if available)
[openwrt.git] / target / linux / ramips / dts / ALL5003.dts
1 /dts-v1/;
2
3 /include/ "rt5350.dtsi"
4
5 / {
6         compatible = "ALL5003", "ralink,rt5350-soc";
7         model = "Allnet ALL5003";
8
9         palmbus@10000000 {
10                 gpio0: gpio@600 {
11                         status = "okay";
12                 };
13
14                 spi@b00 {
15                         status = "okay";
16                         m25p80@0 {
17                                 #address-cells = <1>;
18                                 #size-cells = <1>;
19                                 compatible = "mx25l25635e";
20                                 reg = <0 0>;
21                                 linux,modalias = "m25p80", "mx25l25635e";
22                                 spi-max-frequency = <10000000>;
23
24                                 partition@0 {
25                                         label = "u-boot";
26                                         reg = <0x0 0x30000>;
27                                         read-only;
28                                 };
29
30                                 partition@30000 {
31                                         label = "u-boot-env";
32                                         reg = <0x30000 0x10000>;
33                                         read-only;
34                                 };
35
36                                 factory: partition@40000 {
37                                         label = "factory";
38                                         reg = <0x40000 0x10000>;
39                                         read-only;
40                                 };
41
42                                 partition@50000 {
43                                         label = "firmware";
44                                         reg = <0x50000 0x1fb0000>;
45                                 };
46                         };
47                 };
48         };
49
50         pinctrl {
51                 state_default: pinctrl0 {
52                         gpio {
53                                 ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
54                                 ralink,function = "gpio";
55                         };
56                 };
57         };
58
59         esw@10110000 {
60                 ralink,portmap = <0x3f>;
61         };
62
63         ehci@101c0000 {
64                 status = "okay";
65         };
66
67         ohci@101c1000 {
68                 status = "okay";
69         };
70
71         i2c-gpio {
72                 compatible = "i2c-gpio";
73
74                 gpios = <&gpio0 1 0 &gpio0 2 0>;
75                 i2c-gpio,delay-us = <10>;
76
77                 pcf0: iexp@38 {
78                         #gpio-cells = <2>;
79                         compatible = "inxp,pcf8574a";
80                         reg = <0x38>;
81                         gpio-controller;
82                 };
83
84                 hwmon@4b {
85                         compatible = "national,lm92";
86                         reg = <0x4b>;
87                 };
88         };
89
90         gpio-leds {
91                 compatible = "gpio-leds";
92                 ld1 {
93                         label = "allnet:green:ld1";
94                         gpios = <&pcf0 0 1>;
95                 };
96                 ld2 {
97                         label = "allnet:green:ld2";
98                         gpios = <&pcf0 1 1>;
99                 };
100         };
101 };