target/linux/ramips/dts/ALL5002.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3352.dtsi"
   4
   5 / {
   6         compatible = "ALL5002", "ralink,rt3352-soc";
   7         model = "Allnet ALL5002/ALL5003";
   8
   9         palmbus@10000000 {
  10                 sysc@0 {
  11                         ralink,pinmux = "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  12                         ralink,gpiomux = "i2c";
  13                         ralink,uartmux = "gpio";
  14                         ralink,wdtmux = <1>;
  15                 };
  16
  17                 gpio0: gpio@600 {
  18                         status = "okay";
  19                 };
  20
  21                 spi@b00 {
  22                         status = "okay";
  23                         m25p80@0 {
  24                                 #address-cells = <1>;
  25                                 #size-cells = <1>;
  26                                 compatible = "mx25l25635e";
  27                                 reg = <0 0>;
  28                                 linux,modalias = "m25p80", "mx25l25635e";
  29                                 spi-max-frequency = <10000000>;
  30
  31                 partition@0 {
  32                         label = "u-boot";
  33                         reg = <0x0 0x30000>;
  34                         read-only;
  35                 };
  36
  37                 partition@30000 {
  38                         label = "u-boot-env";
  39                         reg = <0x30000 0x10000>;
  40                         read-only;
  41                 };
  42
  43                 factory: partition@40000 {
  44                         label = "factory";
  45                         reg = <0x40000 0x10000>;
  46                         read-only;
  47                 };
  48
  49                 partition@50000 {
  50                         label = "firmware";
  51                         reg = <0x50000 0x1fb0000>;
  52                 };
  53                         };
  54                 };
  55         };
  56
  57         ethernet@10100000 {
  58                 status = "okay";
  59         };
  60
  61         esw@10110000 {
  62                 status = "okay";
  63                 ralink,portmap = <0x3f>;
  64         };
  65
  66         wmac@10180000 {
  67                 status = "okay";
  68         };
  69
  70         ehci@101c0000 {
  71                 status = "okay";
  72         };
  73
  74         ohci@101c1000 {
  75                 status = "okay";
  76         };
  77
  78         i2c-gpio {
  79                 compatible = "i2c-gpio";
  80
  81                 gpios = <&gpio0 1 0 &gpio0 2 0>;
  82                 i2c-gpio,delay-us = <10>;
  83
  84                 pcf0: iexp@38 {
  85                         #gpio-cells = <2>;
  86                         compatible = "inxp,pcf8574a";
  87                         reg = <0x38>;
  88                         gpio-controller;
  89                 };
  90
  91                 hwmon@4b {
  92                         compatible = "national,lm92";
  93                         reg = <0x4b>;
  94                 };
  95         };
  96
  97         gpio-leds {
  98                 compatible = "gpio-leds";
  99                 ld1 {
 100                         label = "allnet:green:ld1";
 101                         gpios = <&pcf0 0 1>;
 102                 };
 103                 ld2 {
 104                         label = "allnet:green:ld2";
 105                         gpios = <&pcf0 1 1>;
 106                 };
 107         };
 108 };