target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts

   1 /*
   2  * Copyright (C) 2014 Daniel Golle <daniel@makrotopia.org>
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 /dts-v1/;
  10 #include "ox820.dtsi"
  11
  12 / {
  13         model = "Shuttle KD20";
  14
  15         chosen {
  16                 bootargs = "console=ttyS0,115200n8 earlyprintk=serial";
  17         };
  18
  19         pcie-controller@47C00000 {
  20                 status = "okay";
  21         };
  22
  23         uart@44200000 {
  24                 status = "okay";
  25         };
  26
  27         sata@45900000 {
  28                 status = "okay";
  29                 nr-ports = <2>;
  30         };
  31
  32         nand@41000000 {
  33                 status = "okay";
  34
  35                 partition@0 {
  36                         label = "boot";
  37                         reg = <0x00000000 0x00e00000>;
  38                         /*read-only;*/
  39                 };
  40
  41                 partition@e00000 {
  42                         label = "ubi";
  43                         reg = <0x00e00000 0x07200000>;
  44                 };
  45         };
  46
  47         ethernet@40400000 {
  48                 status = "okay";
  49                 snps,phy-addr = <1>;
  50                 phy-mode = "rgmii-id";
  51         };
  52
  53         ehci@40200100 {
  54                 status = "okay";
  55         };
  56
  57         i2c-gpio {
  58                 compatible = "i2c-gpio";
  59                 gpios = <&GPIOB 9 0 &GPIOB 10 0>;
  60                 i2c-gpio,delay-us = <10>;
  61                 #address-cells = <1>;
  62                 #size-cells = <0>;
  63                 pcf8563: rtc@51 {
  64                         compatible = "nxp,pcf8563";
  65                         reg = <0x51>;
  66                 };
  67         };
  68
  69         gpio-keys-polled {
  70                 compatible = "gpio-keys-polled";
  71                 #address-cells = <1>;
  72                 #size-cells = <0>;
  73                 poll-interval = <100>;
  74
  75                 power {
  76                         label = "power";
  77                         gpios = <&GPIOA 10 1>;
  78                         linux,code = <116>;
  79                 };
  80                 reset {
  81                         label = "reset";
  82                         gpios = <&GPIOA 11 1>;
  83                         linux,code = <0x198>;
  84                 };
  85                 eject1 {
  86                         label = "eject1";
  87                         gpios = <&GPIOA 5 1>;
  88                         linux,code = <161>;
  89                 };
  90                 eject2 {
  91                         label = "eject2";
  92                         gpios = <&GPIOA 6 1>;
  93                         linux,code = <162>;
  94                 };
  95         };
  96
  97         gpio-leds {
  98                 compatible = "gpio-leds";
  99                 status {
 100                         label = "kd20:blue:status";
 101                         gpios = <&GPIOB 16 0>;
 102                 };
 103                 status2 {
 104                         label = "kd20:red:status";
 105                         gpios = <&GPIOB 17 0>;
 106                 };
 107                 hdd1blue {
 108                         label = "kd20:blue:hdd1";
 109                         gpios = <&GPIOA 27 0>;
 110                 };
 111                 hdd1red {
 112                         label = "kd20:red:hdd1";
 113                         gpios = <&GPIOB 4 0>;
 114                 };
 115                 hdd2blue {
 116                         label = "kd20:blue:hdd2";
 117                         gpios = <&GPIOB 6 0>;
 118                 };
 119                 hdd2red {
 120                         label = "kd20:red:hdd2";
 121                         gpios = <&GPIOB 7 0>;
 122                 };
 123                 usb {
 124                         label = "kd20:blue:usb";
 125                         gpios = <&GPIOB 8 0>;
 126                 };
 127         };
 128
 129         beeper: beeper {
 130                 compatible = "gpio-beeper";
 131                 gpios = <&GPIOB 11 0>;
 132         };
 133
 134         gpio-fan {
 135                 compatible = "gpio-fan";
 136                 gpios = <&GPIOA 2 1>;
 137         };
 138 };