target/linux/mpc83xx/patches-3.6/203-mtd-add-rbppc_nand-driver.patch

   1 --- a/drivers/mtd/nand/Kconfig
   2 +++ b/drivers/mtd/nand/Kconfig
   3 @@ -497,6 +497,13 @@ config MTD_NAND_PLATFORM
   4           devices. You will need to provide platform-specific functions
   5           via platform_data.
   6
   7 +config MTD_NAND_RB_PPC
   8 +       tristate "MikroTik RB333/600 NAND support"
   9 +       depends on RB_PPC
  10 +       help
  11 +         This option enables support for the NAND device on MikroTik
  12 +         RouterBOARD 333/600 series boards.
  13 +
  14  config MTD_ALAUDA
  15         tristate "MTD driver for Olympus MAUSB-10 and Fujifilm DPC-R1"
  16         depends on USB
  17 --- a/drivers/mtd/nand/Makefile
  18 +++ b/drivers/mtd/nand/Makefile
  19 @@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270)                += cmx27
  20  obj-$(CONFIG_MTD_NAND_PXA3xx)          += pxa3xx_nand.o
  21  obj-$(CONFIG_MTD_NAND_TMIO)            += tmio_nand.o
  22  obj-$(CONFIG_MTD_NAND_PLATFORM)                += plat_nand.o
  23 +obj-$(CONFIG_MTD_NAND_RB_PPC)          += rbppc_nand.o
  24  obj-$(CONFIG_MTD_ALAUDA)               += alauda.o
  25  obj-$(CONFIG_MTD_NAND_PASEMI)          += pasemi_nand.o
  26  obj-$(CONFIG_MTD_NAND_ORION)           += orion_nand.o
  27 --- /dev/null
  28 +++ b/drivers/mtd/nand/rbppc_nand.c
  29 @@ -0,0 +1,250 @@
  30 +/*
  31 + * Copyright (C) 2008-2009 Noah Fontes <nfontes@transtruct.org>
  32 + * Copyright (C) 2009 Michael Guntsche <mike@it-loops.com>
  33 + * Copyright (C) Mikrotik 2007
  34 + *
  35 + * This program is free software; you can redistribute it and/or modify it
  36 + * under the terms of the GNU General Public License as published by the
  37 + * Free Software Foundation; either version 2 of the License, or (at your
  38 + * option) any later version.
  39 + */
  40 +
  41 +#include <linux/init.h>
  42 +#include <linux/module.h>
  43 +#include <linux/mtd/nand.h>
  44 +#include <linux/mtd/mtd.h>
  45 +#include <linux/mtd/partitions.h>
  46 +#include <linux/of_platform.h>
  47 +#include <linux/of_device.h>
  48 +#include <linux/slab.h>
  49 +#include <linux/delay.h>
  50 +#include <asm/io.h>
  51 +
  52 +#define DRV_NAME       "rbppc_nand"
  53 +#define DRV_VERSION    "0.0.2"
  54 +
  55 +static struct mtd_info rmtd;
  56 +static struct nand_chip rnand;
  57 +
  58 +struct rbppc_nand_info {
  59 +       void *gpi;
  60 +       void *gpo;
  61 +       void *localbus;
  62 +
  63 +       unsigned gpio_rdy;
  64 +       unsigned gpio_nce;
  65 +       unsigned gpio_cle;
  66 +       unsigned gpio_ale;
  67 +       unsigned gpio_ctrls;
  68 +};
  69 +
  70 +/* We must use the OOB layout from yaffs 1 if we want this to be recognized
  71 + * properly. Borrowed from the OpenWRT patches for the RB532.
  72 + *
  73 + * See <https://dev.openwrt.org/browser/trunk/target/linux/rb532/
  74 + * patches-2.6.28/025-rb532_nand_fixup.patch> for more details.
  75 + */
  76 +static struct nand_ecclayout rbppc_nand_oob_16 = {
  77 +       .eccbytes = 6,
  78 +       .eccpos = { 8, 9, 10, 13, 14, 15 },
  79 +       .oobavail = 9,
  80 +       .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
  81 +};
  82 +
  83 +static struct mtd_partition rbppc_nand_partition_info[] = {
  84 +       {
  85 +               name: "kernel",
  86 +               offset: 0,
  87 +               size: 4 * 1024 * 1024,
  88 +       },
  89 +       {
  90 +               name: "rootfs",
  91 +               offset: MTDPART_OFS_NXTBLK,
  92 +               size: MTDPART_SIZ_FULL,
  93 +       },
  94 +};
  95 +
  96 +static int rbppc_nand_dev_ready(struct mtd_info *mtd) {
  97 +       struct nand_chip *chip = mtd->priv;
  98 +       struct rbppc_nand_info *priv = chip->priv;
  99 +
 100 +       return in_be32(priv->gpi) & priv->gpio_rdy;
 101 +}
 102 +
 103 +static void rbppc_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) {
 104 +       struct nand_chip *chip = mtd->priv;
 105 +       struct rbppc_nand_info *priv = chip->priv;
 106 +
 107 +       if (ctrl & NAND_CTRL_CHANGE) {
 108 +               unsigned val = in_be32(priv->gpo);
 109 +               if (!(val & priv->gpio_nce)) {
 110 +                       /* make sure Local Bus has done NAND operations */
 111 +                       readb(priv->localbus);
 112 +               }
 113 +
 114 +               if (ctrl & NAND_CLE) {
 115 +                       val |= priv->gpio_cle;
 116 +               } else {
 117 +                       val &= ~priv->gpio_cle;
 118 +               }
 119 +               if (ctrl & NAND_ALE) {
 120 +                       val |= priv->gpio_ale;
 121 +               } else {
 122 +                       val &= ~priv->gpio_ale;
 123 +               }
 124 +               if (!(ctrl & NAND_NCE)) {
 125 +                       val |= priv->gpio_nce;
 126 +               } else {
 127 +                       val &= ~priv->gpio_nce;
 128 +               }
 129 +               out_be32(priv->gpo, val);
 130 +
 131 +               /* make sure GPIO output has changed */
 132 +               val ^= in_be32(priv->gpo);
 133 +               if (val & priv->gpio_ctrls) {
 134 +                       printk(KERN_ERR "rbppc_nand_hwcontrol: NAND GPO change failed 0x%08x\n", val);
 135 +               }
 136 +       }
 137 +
 138 +       if (cmd != NAND_CMD_NONE) writeb(cmd, chip->IO_ADDR_W);
 139 +}
 140 +
 141 +static void rbppc_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
 142 +{
 143 +       struct nand_chip *chip = mtd->priv;
 144 +       memcpy(buf, chip->IO_ADDR_R, len);
 145 +}
 146 +
 147 +static unsigned init_ok = 0;
 148 +
 149 +static int __devinit rbppc_nand_probe(struct platform_device *pdev)
 150 +{
 151 +       struct device_node *gpio;
 152 +       struct device_node *nnand;
 153 +       struct resource res;
 154 +       struct rbppc_nand_info *info;
 155 +       void *baddr;
 156 +       const unsigned *rdy, *nce, *cle, *ale;
 157 +
 158 +       printk(KERN_INFO "rbppc_nand_probe: MikroTik RouterBOARD 333/600 series NAND driver, version " DRV_VERSION "\n");
 159 +
 160 +       info = kmalloc(sizeof(*info), GFP_KERNEL);
 161 +
 162 +       rdy = of_get_property(pdev->dev.of_node, "rdy", NULL);
 163 +       nce = of_get_property(pdev->dev.of_node, "nce", NULL);
 164 +       cle = of_get_property(pdev->dev.of_node, "cle", NULL);
 165 +       ale = of_get_property(pdev->dev.of_node, "ale", NULL);
 166 +
 167 +       if (!rdy || !nce || !cle || !ale) {
 168 +               printk(KERN_ERR "rbppc_nand_probe: GPIO properties are missing\n");
 169 +               goto err;
 170 +       }
 171 +       if (rdy[0] != nce[0] || rdy[0] != cle[0] || rdy[0] != ale[0]) {
 172 +               printk(KERN_ERR "rbppc_nand_probe: Different GPIOs are not supported\n");
 173 +               goto err;
 174 +       }
 175 +
 176 +       gpio = of_find_node_by_phandle(rdy[0]);
 177 +       if (!gpio) {
 178 +               printk(KERN_ERR "rbppc_nand_probe: No GPIO<%x> node found\n", *rdy);
 179 +               goto err;
 180 +       }
 181 +       if (of_address_to_resource(gpio, 0, &res)) {
 182 +               printk(KERN_ERR "rbppc_nand_probe: No reg property in GPIO found\n");
 183 +               goto err;
 184 +       }
 185 +       info->gpo = ioremap_nocache(res.start, res.end - res.start + 1);
 186 +
 187 +       if (!of_address_to_resource(gpio, 1, &res)) {
 188 +               info->gpi = ioremap_nocache(res.start, res.end - res.start + 1);
 189 +       } else {
 190 +               info->gpi = info->gpo;
 191 +       }
 192 +       of_node_put(gpio);
 193 +
 194 +       info->gpio_rdy = 1 << (31 - rdy[1]);
 195 +       info->gpio_nce = 1 << (31 - nce[1]);
 196 +       info->gpio_cle = 1 << (31 - cle[1]);
 197 +       info->gpio_ale = 1 << (31 - ale[1]);
 198 +       info->gpio_ctrls = info->gpio_nce | info->gpio_cle | info->gpio_ale;
 199 +
 200 +       nnand = of_find_node_by_name(NULL, "nnand");
 201 +       if (!nnand) {
 202 +               printk("rbppc_nand_probe: No nNAND found\n");
 203 +               goto err;
 204 +       }
 205 +       if (of_address_to_resource(nnand, 0, &res)) {
 206 +               printk("rbppc_nand_probe: No reg property in nNAND found\n");
 207 +               goto err;
 208 +       }
 209 +       of_node_put(nnand);
 210 +       info->localbus = ioremap_nocache(res.start, res.end - res.start + 1);
 211 +
 212 +       if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
 213 +           printk("rbppc_nand_probe: No reg property found\n");
 214 +           goto err;
 215 +       }
 216 +       baddr = ioremap_nocache(res.start, res.end - res.start + 1);
 217 +
 218 +       memset(&rnand, 0, sizeof(rnand));
 219 +       rnand.cmd_ctrl = rbppc_nand_cmd_ctrl;
 220 +       rnand.dev_ready = rbppc_nand_dev_ready;
 221 +       rnand.read_buf = rbppc_nand_read_buf;
 222 +       rnand.IO_ADDR_W = baddr;
 223 +       rnand.IO_ADDR_R = baddr;
 224 +       rnand.priv = info;
 225 +
 226 +       memset(&rmtd, 0, sizeof(rmtd));
 227 +       rnand.ecc.mode = NAND_ECC_SOFT;
 228 +       rnand.ecc.layout = &rbppc_nand_oob_16;
 229 +       rnand.chip_delay = 25;
 230 +       rmtd.priv = &rnand;
 231 +       rmtd.owner = THIS_MODULE;
 232 +
 233 +       if (nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)) {
 234 +               printk(KERN_ERR "rbppc_nand_probe: RouterBOARD NAND device not found\n");
 235 +               return -ENXIO;
 236 +       }
 237 +
 238 +       mtd_device_parse_register(&rmtd, NULL, 0, rbppc_nand_partition_info, 2);
 239 +       init_ok = 1;
 240 +       return 0;
 241 +
 242 +err:
 243 +       kfree(info);
 244 +       return -1;
 245 +}
 246 +
 247 +static struct of_device_id rbppc_nand_ids[] = {
 248 +       { .name = "nand", },
 249 +       { },
 250 +};
 251 +
 252 +static struct platform_driver rbppc_nand_driver = {
 253 +       .probe  = rbppc_nand_probe,
 254 +       .driver = {
 255 +               .name = "rbppc-nand",
 256 +               .owner = THIS_MODULE,
 257 +               .of_match_table = rbppc_nand_ids,
 258 +       },
 259 +};
 260 +
 261 +static int __init rbppc_nand_init(void)
 262 +{
 263 +       return platform_driver_register(&rbppc_nand_driver);
 264 +}
 265 +
 266 +static void __exit rbppc_nand_exit(void)
 267 +{
 268 +       platform_driver_unregister(&rbppc_nand_driver);
 269 +}
 270 +
 271 +MODULE_AUTHOR("Mikrotikls SIA");
 272 +MODULE_AUTHOR("Noah Fontes");
 273 +MODULE_AUTHOR("Michael Guntsche");
 274 +MODULE_DESCRIPTION("MikroTik RouterBOARD 333/600 series NAND driver");
 275 +MODULE_LICENSE("GPL");
 276 +MODULE_VERSION(DRV_VERSION);
 277 +
 278 +module_init(rbppc_nand_init);
 279 +module_exit(rbppc_nand_exit);