lantiq: use dwc2 by default on all ar9 boards
[openwrt.git] / target / linux / lantiq / patches-4.4 / 0041-USB-DWC2-add-ltq-params.patch
1 --- a/drivers/usb/dwc2/platform.c
2 +++ b/drivers/usb/dwc2/platform.c
3 @@ -145,6 +145,34 @@ static int __dwc2_lowlevel_hw_enable(str
4         return ret;
5  }
6  
7 +static const struct dwc2_core_params params_ltq = {
8 +       .otg_cap                        = 2,    /* non-HNP/non-SRP */
9 +       .otg_ver                        = -1,
10 +       .dma_enable                     = -1,
11 +       .dma_desc_enable                = -1,
12 +       .speed                          = -1,
13 +       .enable_dynamic_fifo            = -1,
14 +       .en_multiple_tx_fifo            = -1,
15 +       .host_rx_fifo_size              = 288,  /* 288 DWORDs */
16 +       .host_nperio_tx_fifo_size       = 128,  /* 128 DWORDs */
17 +       .host_perio_tx_fifo_size        = 96,   /* 96 DWORDs */
18 +       .max_transfer_size              = -1,
19 +       .max_packet_count               = 511,
20 +       .host_channels                  = -1,
21 +       .phy_type                       = -1,
22 +       .phy_utmi_width                 = -1,
23 +       .phy_ulpi_ddr                   = -1,
24 +       .phy_ulpi_ext_vbus              = -1,
25 +       .i2c_enable                     = -1,
26 +       .ulpi_fs_ls                     = -1,
27 +       .host_support_fs_ls_low_power   = -1,
28 +       .host_ls_low_power_phy_clk      = -1,
29 +       .ts_dline                       = -1,
30 +       .reload_ctl                     = -1,
31 +       .ahbcfg                         = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT,
32 +       .uframe_sched                   = -1,
33 +};
34 +
35  /**
36   * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources
37   * @hsotg: The driver state
38 @@ -310,6 +338,8 @@ static int dwc2_driver_remove(struct pla
39  static const struct of_device_id dwc2_of_match_table[] = {
40         { .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
41         { .compatible = "rockchip,rk3066-usb", .data = &params_rk3066 },
42 +       { .compatible = "lantiq,ifxhcd-arx100-dwc2", .data = &params_ltq },
43 +       { .compatible = "lantiq,ifxhcd-xrx200-dwc2", .data = &params_ltq },
44         { .compatible = "snps,dwc2", .data = NULL },
45         { .compatible = "samsung,s3c6400-hsotg", .data = NULL},
46         {},