target/linux/lantiq/patches-3.7/0127-lantiq_etop-Fix-supported-modes-flag.patch

   1 From 4de6a250878c9ce5605838b65acbddf338a7254a Mon Sep 17 00:00:00 2001
   2 From: Sebastian Mayr <sebastian.mayr@student.uibk.ac.at>
   3 Date: Thu, 20 Dec 2012 18:52:10 +0100
   4 Subject: [PATCH 2/2] lantiq_etop: Fix supported modes flag
   5
   6 ---
   7  drivers/net/ethernet/lantiq_etop.c | 19 ++++++++++---------
   8  1 file changed, 10 insertions(+), 9 deletions(-)
   9
  10 --- a/drivers/net/ethernet/lantiq_etop.c
  11 +++ b/drivers/net/ethernet/lantiq_etop.c
  12 @@ -550,6 +550,13 @@ ltq_etop_mdio_probe(struct net_device *d
  13  {
  14         struct ltq_etop_priv *priv = netdev_priv(dev);
  15         struct phy_device *phydev = NULL;
  16 +       u32 phy_supported =  (SUPPORTED_10baseT_Half
  17 +                       | SUPPORTED_10baseT_Full
  18 +                       | SUPPORTED_100baseT_Half
  19 +                       | SUPPORTED_100baseT_Full
  20 +                       | SUPPORTED_Autoneg
  21 +                       | SUPPORTED_MII
  22 +                       | SUPPORTED_TP);
  23
  24         if (of_machine_is_compatible("lantiq,ase"))
  25                 phydev = priv->mii_bus->phy_map[8];
  26 @@ -569,17 +576,11 @@ ltq_etop_mdio_probe(struct net_device *d
  27                 return PTR_ERR(phydev);
  28         }
  29
  30 -       phydev->supported &= (SUPPORTED_10baseT_Half
  31 -                             | SUPPORTED_10baseT_Full
  32 -                             | SUPPORTED_100baseT_Half
  33 -                             | SUPPORTED_100baseT_Full
  34 -                             | SUPPORTED_Autoneg
  35 -                             | SUPPORTED_MII
  36 -                             | SUPPORTED_TP);
  37         if (of_machine_is_compatible("lantiq,ar9"))
  38 -               phydev->supported &= SUPPORTED_1000baseT_Half
  39 -                                       | SUPPORTED_1000baseT_Full;
  40 +               phy_supported |= SUPPORTED_1000baseT_Half
  41 +                       | SUPPORTED_1000baseT_Full;
  42
  43 +       phydev->supported &= phy_supported;
  44         phydev->advertising = phydev->supported;
  45         priv->phydev = phydev;
  46         pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",