target/linux/lantiq/image/ARV7525PW.dts

   1 /dts-v1/;
   2
   3 /include/ "danube.dtsi"
   4
   5 / {
   6         model = "ARV7525PW - Speedport W303V Typ A";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10         };
  11
  12         memory@0 {
  13                 reg = <0x0 0x2000000>;
  14         };
  15
  16         sram@1F000000 {
  17                 vmmc@107000 {
  18                         status = "okay";
  19                         gpios = <&gpio 31 0>;
  20                 };
  21         };
  22
  23         fpi@10000000 {
  24                 localbus@0 {
  25                         nor-boot@0 {
  26                                 compatible = "lantiq,nor";
  27                                 bank-width = <2>;
  28                                 reg = <0 0x0 0x2000000>;
  29                                 #address-cells = <1>;
  30                                 #size-cells = <1>;
  31
  32                                 partition@0 {
  33                                         label = "uboot";
  34                                         reg = <0x00000 0x10000>;
  35                                         read-only;
  36                                 };
  37
  38                                 partition@10000 {
  39                                         label = "uboot_env";
  40                                         reg = <0x10000 0x10000>;
  41                                         read-only;
  42                                 };
  43
  44                                 partition@20000 {
  45                                         label = "linux";
  46                                         reg = <0x20000 0x3d0000>;
  47                                 };
  48
  49                                 partition@400000 {
  50                                         label = "board_config";
  51                                         reg = <0x3f0000 0x10000>;
  52                                         read-only;
  53                                 };
  54                         };
  55
  56                         mac_addr {
  57                                 compatible = "lantiq,eth-mac";
  58                                 reg = <0 0x3f0016 0x6>;
  59                                 mac-increment = <2>;
  60                         };
  61
  62                         ralink_eep {
  63                                 compatible = "ralink,eeprom";
  64                                 ralink,eeprom = "RT2860.eeprom";
  65                                 reg = <0 0x3f0410 0x110>;
  66                         };
  67                 };
  68
  69                 gpio: pinmux@E100B10 {
  70                         pinctrl-names = "default";
  71                         pinctrl-0 = <&state_default>;
  72
  73                         state_default: pinmux {
  74                                 exin {
  75                                         lantiq,groups = "exin1";
  76                                         lantiq,function = "exin";
  77                                 };
  78                                 pci {
  79                                         lantiq,groups = "gnt1", "req1";
  80                                         lantiq,function = "pci";
  81                                 };
  82                         };
  83                 };
  84
  85                 etop@E180000 {
  86                         phy-mode = "mii";
  87                 };
  88
  89                 pci@E105400 {
  90                         status = "okay";
  91                         interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
  92                         req-mask = <0x1>;
  93                 };
  94
  95         };
  96
  97         gpio-keys-polled {
  98                 compatible = "gpio-keys-polled";
  99                 #address-cells = <1>;
 100                 #size-cells = <0>;
 101                 poll-interval = <100>;
 102
 103                 wps {
 104                         label = "wps";
 105                         gpios = <&gpio 29 1>;
 106                         linux,code = <0x211>;
 107                 };
 108                 reset {
 109                         label = "reset";
 110                         gpios = <&gpio 30 1>;
 111                         linux,code = <0x100>;
 112                 };
 113         };
 114
 115         gpio-leds {
 116                 compatible = "gpio-leds";
 117                 power {
 118                         label = "power";
 119                         gpios = <&gpio 3 1>;
 120                 };
 121                 power1 {
 122                         label = "power1";
 123                         gpios = <&gpio 4 1>;
 124                 };
 125                 online {
 126                         label = "online";
 127                         gpios = <&gpio 5 1>;
 128                 };
 129                 voice {
 130                         label = "voice";
 131                         gpios = <&gpio 6 1>;
 132                 };
 133                 voice2 {
 134                         label = "voice2";
 135                         gpios = <&gpio 8 1>;
 136                 };
 137                 wifi {
 138                         label = "wifi";
 139                         gpios = <&gpio 9 1>;
 140                 };
 141         };
 142 };