target/linux/lantiq/image/ARV4525PW.dts

   1 /dts-v1/;
   2
   3 /include/ "danube.dtsi"
   4
   5 / {
   6         model = "ARV4525PW - Speedport W501V Typ A";
   7
   8         memory@0 {
   9                 reg = <0x0 0x2000000>;
  10         };
  11
  12         sram@1F000000 {
  13                 vmmc@107000 {
  14                         status = "okay";
  15                         gpios = <&gpio 31 0>;
  16                 };
  17         };
  18
  19         fpi@10000000 {
  20                 localbus@0 {
  21                         nor-boot@0 {
  22                                 compatible = "lantiq,nor";
  23                                 bank-width = <2>;
  24                                 reg = <0 0x0 0x2000000>;
  25                                 #address-cells = <1>;
  26                                 #size-cells = <1>;
  27
  28                                 partition@0 {
  29                                         label = "uboot";
  30                                         reg = <0x00000 0x10000>;
  31                                         read-only;
  32                                 };
  33
  34                                 partition@10000 {
  35                                         label = "uboot_env";
  36                                         reg = <0x10000 0x10000>;
  37                                         read-only;
  38                                 };
  39
  40                                 partition@20000 {
  41                                         label = "linux";
  42                                         reg = <0x20000 0x3d0000>;
  43                                 };
  44
  45                                 partition@400000 {
  46                                         label = "boardconfig";
  47                                         reg = <0x3f0000 0x10000>;
  48                                         read-only;
  49                                 };
  50                         };
  51
  52                         mac_addr {
  53                                 compatible = "lantiq,eth-mac";
  54                                 reg = <0 0x3f0016 0x6>;
  55                                 mac-increment = <2>;
  56                         };
  57
  58                         ath5k_eep {
  59                                 compatible = "ath5k,eeprom";
  60                                 reg = <0 0x3f0400 0x800>;
  61                                 ath,mac-offset = <0>;
  62                                 ath,eep-swap;
  63                         };
  64                 };
  65
  66                 gpio: pinmux@E100B10 {
  67                         pinctrl-names = "default";
  68                         pinctrl-0 = <&state_default>;
  69
  70                         state_default: pinmux {
  71                                 pci_in {
  72                                         lantiq,groups = "req1";
  73                                         lantiq,function = "pci";
  74                                         lantiq,open-drain = <1>;
  75                                         lantiq,pull = <2>;
  76                                         lantiq,output = <0>;
  77                                 };
  78                                 pci_out {
  79                                         lantiq,groups = "gnt1";
  80                                         lantiq,function = "pci";
  81                                         lantiq,output = <1>;
  82                                 };
  83                                 pci_rst {
  84                                         lantiq,pins = "io21";
  85                                         lantiq,pull = <2>;
  86                                         lantiq,output = <1>;
  87                                 };
  88                                 relay {
  89                                         lantiq,pins = "io31";
  90                                         lantiq,output = <1>;
  91                                 };
  92                         };
  93                 };
  94
  95                 etop@E180000 {
  96                         phy-mode = "mii";
  97                 };
  98
  99                 pci@E105400 {
 100                         status = "okay";
 101                         gpio-reset = <&gpio 21 0>;
 102                 };
 103
 104         };
 105
 106 /*
 107 #define ARV4525PW_PHYRESET      13
 108 #define ARV4525PW_RELAY         31
 109 */
 110
 111         gpio-keys-polled {
 112                 compatible = "gpio-keys-polled";
 113                 #address-cells = <1>;
 114                 #size-cells = <0>;
 115                 poll-interval = <100>;
 116
 117                 wps {
 118                         label = "wps";
 119                         gpios = <&gpio 29 1>;
 120                         linux,code = <0x211>;
 121                 };
 122                 reset {
 123                         label = "reset";
 124                         gpios = <&gpio 30 1>;
 125                         linux,code = <0x198>;
 126                 };
 127         };
 128
 129         gpio-leds {
 130                 compatible = "gpio-leds";
 131                 fxo {
 132                         label = "fxo";
 133                         gpios = <&gpio 4 1>;
 134                 };
 135                 fxs {
 136                         label = "fxs";
 137                         gpios = <&gpio 5 1>;
 138                 };
 139                 dsl {
 140                         label = "dsl";
 141                         gpios = <&gpio 6 1>;
 142                 };
 143                 wifi {
 144                         label = "wifi";
 145                         gpios = <&gpio 8 1>;
 146                 };
 147                 online {
 148                         /*label = "online"; - we dont have a power led, lets use this one */
 149                         label = "power";
 150                         gpios = <&gpio 9 1>;
 151                 };
 152         };
 153 };