target/linux/lantiq/files/arch/mips/lantiq/falcon/mach-easy98000.c

   1 /*
   2  *  This program is free software; you can redistribute it and/or modify it
   3  *  under the terms of the GNU General Public License version 2 as published
   4  *  by the Free Software Foundation.
   5  *
   6  *  Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
   7  *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
   8  */
   9
  10 #include <linux/platform_device.h>
  11 #include <linux/mtd/partitions.h>
  12 #include <linux/spi/spi.h>
  13 #include <linux/spi/spi_gpio.h>
  14 #include <linux/spi/eeprom.h>
  15
  16 #include "../machtypes.h"
  17
  18 #include "devices.h"
  19
  20 static struct mtd_partition easy98000_nor_partitions[] = {
  21         {
  22                 .name   = "uboot",
  23                 .offset = 0x0,
  24                 .size   = 0x40000,
  25         },
  26         {
  27                 .name   = "uboot_env",
  28                 .offset = 0x40000,
  29                 .size   = 0x40000,      /* 2 sectors for redundant env. */
  30         },
  31         {
  32                 .name   = "linux",
  33                 .offset = 0x80000,
  34                 .size   = 0xF80000,     /* map only 16 MiB */
  35         },
  36 };
  37
  38 struct physmap_flash_data easy98000_nor_flash_data = {
  39         .nr_parts       = ARRAY_SIZE(easy98000_nor_partitions),
  40         .parts          = easy98000_nor_partitions,
  41 };
  42
  43 static struct flash_platform_data easy98000_spi_flash_platform_data = {
  44         .name = "sflash",
  45         .parts = easy98000_nor_partitions,
  46         .nr_parts = ARRAY_SIZE(easy98000_nor_partitions)
  47 };
  48
  49 static struct spi_board_info easy98000_spi_flash_data __initdata = {
  50         .modalias               = "m25p80",
  51         .bus_num                = 0,
  52         .chip_select            = 0,
  53         .max_speed_hz           = 10 * 1000 * 1000,
  54         .mode                   = SPI_MODE_3,
  55         .platform_data          = &easy98000_spi_flash_platform_data
  56 };
  57
  58 /* setup gpio based spi bus/device for access to the eeprom on the board */
  59 #define SPI_GPIO_MRST           102
  60 #define SPI_GPIO_MTSR           103
  61 #define SPI_GPIO_CLK            104
  62 #define SPI_GPIO_CS0            105
  63 #define SPI_GPIO_CS1            106
  64 #define SPI_GPIO_BUS_NUM        1
  65
  66 static struct spi_gpio_platform_data easy98000_spi_gpio_data = {
  67         .sck            = SPI_GPIO_CLK,
  68         .mosi           = SPI_GPIO_MTSR,
  69         .miso           = SPI_GPIO_MRST,
  70         .num_chipselect = 2,
  71 };
  72
  73 static struct platform_device easy98000_spi_gpio_device = {
  74         .name                   = "spi_gpio",
  75         .id                     = SPI_GPIO_BUS_NUM,
  76         .dev.platform_data      = &easy98000_spi_gpio_data,
  77 };
  78
  79 static struct spi_eeprom at25160n = {
  80         .byte_len       = 16 * 1024 / 8,
  81         .name           = "at25160n",
  82         .page_size      = 32,
  83         .flags          = EE_ADDR2,
  84 };
  85
  86 static struct spi_board_info easy98000_spi_gpio_devices __initdata = {
  87         .modalias               = "at25",
  88         .bus_num                = SPI_GPIO_BUS_NUM,
  89         .max_speed_hz           = 1000 * 1000,
  90         .mode                   = SPI_MODE_3,
  91         .chip_select            = 1,
  92         .controller_data        = (void *) SPI_GPIO_CS1,
  93         .platform_data          = &at25160n,
  94 };
  95
  96 static void __init
  97 easy98000_init_common(void)
  98 {
  99         spi_register_board_info(&easy98000_spi_gpio_devices, 1);
 100         platform_device_register(&easy98000_spi_gpio_device);
 101         falcon_register_i2c();
 102 }
 103
 104 static void __init
 105 easy98000_init(void)
 106 {
 107         easy98000_init_common();
 108         ltq_register_nor(&easy98000_nor_flash_data);
 109 }
 110
 111 static void __init
 112 easy98000sf_init(void)
 113 {
 114         easy98000_init_common();
 115         falcon_register_spi_flash(&easy98000_spi_flash_data);
 116 }
 117
 118 static void __init
 119 easy98000nand_init(void)
 120 {
 121         easy98000_init_common();
 122         falcon_register_nand();
 123 }
 124
 125 MIPS_MACHINE(LANTIQ_MACH_EASY98000,
 126                         "EASY98000",
 127                         "EASY98000 Eval Board",
 128                         easy98000_init);
 129
 130 MIPS_MACHINE(LANTIQ_MACH_EASY98000SF,
 131                         "EASY98000SF",
 132                         "EASY98000 Eval Board (Serial Flash)",
 133                         easy98000sf_init);
 134
 135 MIPS_MACHINE(LANTIQ_MACH_EASY98000NAND,
 136                         "EASY98000NAND",
 137                         "EASY98000 Eval Board (NAND Flash)",
 138                         easy98000nand_init);