target/linux/lantiq/dts/vr9.dtsi

   1 / {
   2         #address-cells = <1>;
   3         #size-cells = <1>;
   4         compatible = "lantiq,xway", "lantiq,vr9";
   5
   6         cpus {
   7                 cpu@0 {
   8                         compatible = "mips,mips34Kc";
   9                 };
  10         };
  11
  12         memory@0 {
  13                 device_type = "memory";
  14         };
  15
  16         biu@1F800000 {
  17                 #address-cells = <1>;
  18                 #size-cells = <1>;
  19                 compatible = "lantiq,biu", "simple-bus";
  20                 reg = <0x1F800000 0x800000>;
  21                 ranges = <0x0 0x1F800000 0x7FFFFF>;
  22
  23                 icu0: icu@80200 {
  24                         #interrupt-cells = <1>;
  25                         interrupt-controller;
  26                         compatible = "lantiq,icu";
  27                         reg = <0x80200 0x28
  28                                 0x80228 0x28
  29                                 0x80250 0x28
  30                                 0x80278 0x28
  31                                 0x802a0 0x28>;
  32                 };
  33
  34                 watchdog@803F0 {
  35                         compatible = "lantiq,wdt";
  36                         reg = <0x803F0 0x10>;
  37                 };
  38         };
  39
  40         sram@1F000000 {
  41                 #address-cells = <1>;
  42                 #size-cells = <1>;
  43                 compatible = "lantiq,sram", "simple-bus";
  44                 reg = <0x1F000000 0x800000>;
  45                 ranges = <0x0 0x1F000000 0x7FFFFF>;
  46
  47                 eiu0: eiu@101000 {
  48                         #interrupt-cells = <1>;
  49                         interrupt-controller;
  50                         compatible = "lantiq,eiu-xway";
  51                         reg = <0x101000 0x1000>;
  52                         interrupt-parent = <&icu0>;
  53                         interrupts = <166 135 66 40 41 42>;
  54                 };
  55
  56                 pmu0: pmu@102000 {
  57                         compatible = "lantiq,pmu-xway";
  58                         reg = <0x102000 0x1000>;
  59                 };
  60
  61                 cgu0: cgu@103000 {
  62                         compatible = "lantiq,cgu-xway";
  63                         reg = <0x103000 0x1000>;
  64                 };
  65
  66                 dcdc@106a00 {
  67                         compatible = "lantiq,dcdc-xrx200";
  68                         reg = <0x106a00 0x200>;
  69                 };
  70
  71                 rcu0: rcu@203000 {
  72                         compatible = "lantiq,rcu-xrx200";
  73                         reg = <0x203000 0x1000>;
  74                         /* irq for thermal sensor */
  75                         interrupt-parent = <&icu0>;
  76                         interrupts = <115>;
  77                 };
  78
  79                 xbar0: xbar@400000 {
  80                         compatible = "lantiq,xbar-xway";
  81                         reg = <0x400000 0x1000>;
  82                 };
  83         };
  84
  85         fpi@10000000 {
  86                 #address-cells = <1>;
  87                 #size-cells = <1>;
  88                 compatible = "lantiq,fpi", "simple-bus";
  89                 ranges = <0x0 0x10000000 0xEEFFFFF>;
  90                 reg = <0x10000000 0xEF00000>;
  91
  92                 localbus@0 {
  93                         #address-cells = <2>;
  94                         #size-cells = <1>;
  95                         ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
  96                                 1 0 0x4000000 0x4000010>; /* addsel1 */
  97                         compatible = "lantiq,localbus", "simple-bus";
  98                 };
  99
 100                 gptu@E100A00 {
 101                         compatible = "lantiq,gptu-xway";
 102                         reg = <0xE100A00 0x100>;
 103                         interrupt-parent = <&icu0>;
 104                         interrupts = <126 127 128 129 130 131>;
 105                 };
 106
 107                 asc0: serial@E100400 {
 108                         compatible = "lantiq,asc";
 109                         reg = <0xE100400 0x400>;
 110                         interrupt-parent = <&icu0>;
 111                         interrupts = <104 105 106>;
 112                         status = "disabled";
 113                 };
 114
 115                 spi: spi@E100800 {
 116                         compatible = "lantiq,xrx200-spi";
 117                         reg = <0xE100800 0x100>;
 118                         interrupt-parent = <&icu0>;
 119                         interrupts = <22 23 24>;
 120                         interrupt-names = "spi_rx", "spi_tx", "spi_err",
 121                                         "spi_frm";
 122                         #address-cells = <1>;
 123                         #size-cells = <1>;
 124                         status = "disabled";
 125                 };
 126
 127                 gpio: pinmux@E100B10 {
 128                         compatible = "lantiq,xrx200-pinctrl";
 129                         #gpio-cells = <2>;
 130                         gpio-controller;
 131                         reg = <0xE100B10 0xA0>;
 132                 };
 133
 134                 asc1: serial@E100C00 {
 135                         compatible = "lantiq,asc";
 136                         reg = <0xE100C00 0x400>;
 137                         interrupt-parent = <&icu0>;
 138                         interrupts = <112 113 114>;
 139                 };
 140
 141                 deu@E103100 {
 142                         compatible = "lantiq,deu-xrx200";
 143                         reg = <0xE103100 0xf00>;
 144                 };
 145
 146                 dma0: dma@E104100 {
 147                         compatible = "lantiq,dma-xway";
 148                         reg = <0xE104100 0x800>;
 149                 };
 150
 151                 ebu0: ebu@E105300 {
 152                         compatible = "lantiq,ebu-xway";
 153                         reg = <0xE105300 0x100>;
 154                 };
 155
 156                 ifxhcd@E101000 {
 157                         status = "disabled";
 158                         compatible = "lantiq,ifxhcd-xrx200", "lantiq,ifxhcd-xrx200-dwc2";
 159                         reg = <0xE101000 0x1000
 160                                 0xE120000 0x3f000>;
 161                         interrupt-parent = <&icu0>;
 162                         interrupts = <62 91>;
 163                 };
 164
 165                 ifxhcd@E106000 {
 166                         status = "disabled";
 167                         compatible = "lantiq,ifxhcd-xrx200-dwc2";
 168                         reg = <0xE106000 0x1000>;
 169                         interrupt-parent = <&icu0>;
 170                         interrupts = <91>;
 171                 };
 172
 173                 eth0: eth@E108000 {
 174                         #address-cells = <1>;
 175                         #size-cells = <0>;
 176                         compatible = "lantiq,xrx200-net";
 177                         reg = < 0xE108000 0x3000 /* switch */
 178                                 0xE10B100 0x70 /* mdio */
 179                                 0xE10B1D8 0x30 /* mii */
 180                                 0xE10B308 0x30 /* pmac */
 181                         >;
 182                         interrupt-parent = <&icu0>;
 183                         interrupts = <73 72>;
 184                 };
 185
 186                 mei@E116000 {
 187                         compatible = "lantiq,mei-xrx200";
 188                         reg = <0xE116000 0x9c>;
 189                         interrupt-parent = <&icu0>;
 190                         interrupts = <63>;
 191                 };
 192
 193                 ppe@E234000 {
 194                         compatible = "lantiq,ppe-xrx200";
 195                         interrupt-parent = <&icu0>;
 196                         interrupts = <96>;
 197                 };
 198
 199                 pcie@d900000 {
 200                         interrupt-parent = <&icu0>;
 201                         interrupts = <161 144>;
 202                         compatible = "lantiq,pcie-xrx200";
 203                         gpio-reset = <&gpio 38 0>;
 204                 };
 205
 206                 pci0: pci@E105400 {
 207                         #address-cells = <3>;
 208                         #size-cells = <2>;
 209                         #interrupt-cells = <1>;
 210                         compatible = "lantiq,pci-xway";
 211                         bus-range = <0x0 0x0>;
 212                         ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
 213                                 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
 214                         reg = <0x7000000 0x8000         /* config space */
 215                                 0xE105400 0x400>;       /* pci bridge */
 216                         status = "disabled";
 217                 };
 218         };
 219
 220         vdsl {
 221                 compatible = "lantiq,vdsl-vrx200";
 222         };
 223 };