target/linux/lantiq/dts/ar9.dtsi

   1 / {
   2         #address-cells = <1>;
   3         #size-cells = <1>;
   4         compatible = "lantiq,xway", "lantiq,ar9";
   5
   6         cpus {
   7                 cpu@0 {
   8                         compatible = "mips,mips34K";
   9                 };
  10         };
  11
  12         memory@0 {
  13                 device_type = "memory";
  14         };
  15
  16         biu@1F800000 {
  17                 #address-cells = <1>;
  18                 #size-cells = <1>;
  19                 compatible = "lantiq,biu", "simple-bus";
  20                 reg = <0x1F800000 0x800000>;
  21                 ranges = <0x0 0x1F800000 0x7FFFFF>;
  22
  23                 icu0: icu@80200 {
  24                         #interrupt-cells = <1>;
  25                         interrupt-controller;
  26                         compatible = "lantiq,icu";
  27                         reg = <0x80200 0x28
  28                                 0x80228 0x28
  29                                 0x80250 0x28
  30                                 0x80278 0x28
  31                                 0x802a0 0x28>;
  32                 };
  33
  34                 watchdog@803F0 {
  35                         compatible = "lantiq,wdt";
  36                         reg = <0x803F0 0x10>;
  37                 };
  38         };
  39
  40         sram@1F000000 {
  41                 #address-cells = <1>;
  42                 #size-cells = <1>;
  43                 compatible = "lantiq,sram", "simple-bus";
  44                 reg = <0x1F000000 0x800000>;
  45                 ranges = <0x0 0x1F000000 0x7FFFFF>;
  46
  47                 eiu0: eiu@101000 {
  48                         #interrupt-cells = <1>;
  49                         interrupt-controller;
  50                         compatible = "lantiq,eiu-xway";
  51                         reg = <0x101000 0x1000>;
  52                         interrupt-parent = <&icu0>;
  53                         interrupts = <166 135 66 40 41 42>;
  54                 };
  55
  56                 pmu0: pmu@102000 {
  57                         compatible = "lantiq,pmu-xway";
  58                         reg = <0x102000 0x1000>;
  59                 };
  60
  61                 cgu0: cgu@103000 {
  62                         compatible = "lantiq,cgu-xway";
  63                         reg = <0x103000 0x1000>;
  64                         #clock-cells = <1>;
  65                 };
  66
  67                 rcu0: rcu@203000 {
  68                         compatible = "lantiq,rcu-xway";
  69                         reg = <0x203000 0x1000>;
  70                 };
  71         };
  72
  73         fpi@10000000 {
  74                 #address-cells = <1>;
  75                 #size-cells = <1>;
  76                 compatible = "lantiq,fpi", "simple-bus";
  77                 ranges = <0x0 0x10000000 0xEEFFFFF>;
  78                 reg = <0x10000000 0xEF00000>;
  79
  80                 localbus@0 {
  81                         #address-cells = <2>;
  82                         #size-cells = <1>;
  83                         ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
  84                                 1 0 0x4000000 0x4000010>; /* addsel1 */
  85                         compatible = "lantiq,localbus", "simple-bus";
  86                 };
  87
  88                 gptu@E100A00 {
  89                         compatible = "lantiq,gptu-xway";
  90                         reg = <0xE100A00 0x100>;
  91                         interrupt-parent = <&icu0>;
  92                         interrupts = <126 127 128 129 130 131>;
  93                 };
  94
  95                 asc0: serial@E100400 {
  96                         compatible = "lantiq,asc";
  97                         reg = <0xE100400 0x400>;
  98                         interrupt-parent = <&icu0>;
  99                         interrupts = <104 105 106>;
 100                         status = "disabled";
 101                 };
 102
 103                 spi: spi@E100800 {
 104                         compatible = "lantiq,xrx100-spi";
 105                         reg = <0xE100800 0x100>;
 106                         interrupt-parent = <&icu0>;
 107                         interrupts = <22 23 24>;
 108                         interrupt-names = "spi_rx", "spi_tx", "spi_err",
 109                                         "spi_frm";
 110                         #address-cells = <1>;
 111                         #size-cells = <1>;
 112                         status = "disabled";
 113                 };
 114
 115                 gpio: pinmux@E100B10 {
 116                         compatible = "lantiq,xrx100-pinctrl";
 117                         #gpio-cells = <2>;
 118                         gpio-controller;
 119                         reg = <0xE100B10 0xA0>;
 120                 };
 121
 122                 asc1: serial@E100C00 {
 123                         compatible = "lantiq,asc";
 124                         reg = <0xE100C00 0x400>;
 125                         interrupt-parent = <&icu0>;
 126                         interrupts = <112 113 114>;
 127                 };
 128
 129                 ifxhcd@E101000 {
 130                         compatible = "lantiq,ifxhcd-arx100", "lantiq,ifxhcd-arx100-dwc2";
 131                         reg = <0xE101000 0x1000
 132                                 0xE120000 0x3f000>;
 133                         interrupt-parent = <&icu0>;
 134                         interrupts = <62 91>;
 135                         status = "disabled";
 136                 };
 137
 138                 ifxhcd@E106000 {
 139                         compatible = "lantiq,ifxhcd-arx100-dwc2";
 140                         reg = <0xE106000 0x1000
 141                                 0xE1E0000 0x3f000>;
 142                         interrupt-parent = <&icu0>;
 143                         interrupts = <91>;
 144                         status = "disabled";
 145                 };
 146
 147                 deu@E103100 {
 148                         compatible = "lantiq,deu-arx100";
 149                         reg = <0xE103100 0xf00>;
 150                 };
 151
 152                 dma0: dma@E104100 {
 153                         compatible = "lantiq,dma-xway";
 154                         reg = <0xE104100 0x800>;
 155                 };
 156
 157                 ebu0: ebu@E105300 {
 158                         compatible = "lantiq,ebu-xway";
 159                         reg = <0xE105300 0x100>;
 160                 };
 161
 162                 mei@E116000 {
 163                         compatible = "lantiq,mei-xway";
 164                         interrupt-parent = <&icu0>;
 165                         interrupts = <63>;
 166                 };
 167
 168                 etop@E180000 {
 169                         compatible = "lantiq,etop-xway";
 170                         reg = <0xE180000 0x40000
 171                                 0xE108000 0x200>;
 172                         interrupt-parent = <&icu0>;
 173                         interrupts = <73 72>;
 174                         mac-address = [ 00 11 22 33 44 55 ];
 175                 };
 176
 177                 ppe@E234000 {
 178                         compatible = "lantiq,ppe-arx100";
 179                         interrupt-parent = <&icu0>;
 180                         interrupts = <96>;
 181                 };
 182
 183                 pci0: pci@E105400 {
 184                         status = "disabled";
 185                         #address-cells = <3>;
 186                         #size-cells = <2>;
 187                         #interrupt-cells = <1>;
 188                         compatible = "lantiq,pci-xway";
 189                         bus-range = <0x0 0x0>;
 190                         ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
 191                                   0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
 192                         reg = <0x7000000 0x8000         /* config space */
 193                                 0xE105400 0x400>;       /* pci bridge */
 194                         lantiq,bus-clock = <33333333>;
 195                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 196                         interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
 197                         req-mask = <0x1>;
 198                 };
 199         };
 200
 201         adsl {
 202                 compatible = "lantiq,adsl-arx100";
 203         };
 204 };