target/linux/lantiq/dts/TDW89X0.dtsi

   1 /include/ "vr9.dtsi"
   2
   3 / {
   4         chosen {
   5                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   6
   7                 leds {
   8                         /* the power led can't be controlled, use the wps led instead */
   9                         boot = &wps;
  10                         failsafe = &wps;
  11
  12                         dsl = &dsl;
  13                         internet = &internet;
  14                         usb = &usb0;
  15                         usb2 = &usb2;
  16                 };
  17         };
  18
  19         memory@0 {
  20                 reg = <0x0 0x4000000>;
  21         };
  22
  23         fpi@10000000 {
  24                 gpio: pinmux@E100B10 {
  25                         pinctrl-names = "default";
  26                         pinctrl-0 = <&state_default>;
  27
  28                         state_default: pinmux {
  29                                 mdio {
  30                                         lantiq,groups = "mdio";
  31                                         lantiq,function = "mdio";
  32                                 };
  33                                 gphy-leds {
  34                                         lantiq,groups = "gphy0 led1", "gphy1 led1";
  35                                         lantiq,function = "gphy";
  36                                         lantiq,pull = <2>;
  37                                         lantiq,open-drain = <0>;
  38                                         lantiq,output = <1>;
  39                                 };
  40                                 phy-rst {
  41                                         lantiq,pins = "io42";
  42                                         lantiq,pull = <0>;
  43                                         lantiq,open-drain = <0>;
  44                                         lantiq,output = <1>;
  45                                 };
  46                                 pcie-rst {
  47                                         lantiq,pins = "io38";
  48                                         lantiq,pull = <0>;
  49                                         lantiq,output = <1>;
  50                                 };
  51                         };
  52                         pins_spi_default: pins_spi_default {
  53                                 spi_in {
  54                                         lantiq,groups = "spi_di";
  55                                         lantiq,function = "spi";
  56                                 };
  57                                 spi_out {
  58                                         lantiq,groups = "spi_do", "spi_clk",
  59                                                 "spi_cs4";
  60                                         lantiq,function = "spi";
  61                                         lantiq,output = <1>;
  62                                 };
  63                         };
  64                 };
  65
  66                 ifxhcd@E101000 {
  67                         status = "okay";
  68                         gpios = <&gpio 33 0>;
  69                         lantiq,portmask = <0x3>;
  70                 };
  71
  72                 ifxhcd@E106000 {
  73                         status = "okay";
  74                         gpios = <&gpio 33 0>;
  75                 };
  76         };
  77
  78         gphy-xrx200 {
  79                 compatible = "lantiq,phy-xrx200";
  80                 firmware = "lantiq/vr9_phy11g_a2x.bin";
  81                 phys = [ 00 01 ];
  82         };
  83
  84         ath9k_eep {
  85                 compatible = "ath9k,eeprom";
  86                 ath,eep-flash = <&ath9k_cal 0x21000>;
  87                 ath,mac-offset = <0xf100>;
  88                 ath,mac-increment;
  89                 ath,led-pin = <0>;
  90                 ath,disable-5ghz;
  91                 ath,led-active-high;
  92         };
  93
  94         gpio-keys-polled {
  95                 compatible = "gpio-keys-polled";
  96                 #address-cells = <1>;
  97                 #size-cells = <0>;
  98                 poll-interval = <100>;
  99                 reset {
 100                         label = "reset";
 101                         gpios = <&gpio 0 1>;
 102                         linux,code = <0x198>;
 103                 };
 104
 105                 wifi {
 106                         label = "wifi";
 107                         gpios = <&gpio 9 0>;
 108                         linux,code = <0xf7>;
 109                         linux,input-type = <5>; /* EV_SW */
 110                 };
 111
 112                 wps {
 113                         label = "wps";
 114                         gpios = <&gpio 39 1>;
 115                         linux,code = <0x211>;
 116                 };
 117         };
 118
 119         gpio-leds {
 120                 compatible = "gpio-leds";
 121                 /*
 122                         power is not controllable via gpio
 123         */
 124                 dsl: dsl {
 125                         label = "tdw89x0:green:dsl";
 126                         gpios = <&gpio 4 0>;
 127                 };
 128                 internet: internet {
 129                         label = "tdw89x0:green:internet";
 130                         gpios = <&gpio 5 0>;
 131                 };
 132                 usb0: usb0 {
 133                         label = "tdw89x0:green:usb";
 134                         gpios = <&gpio 19 0>;
 135                 };
 136                 usb2: usb2 {
 137                         label = "tdw89x0:green:usb2";
 138                         gpios = <&gpio 20 0>;
 139                 };
 140                 wps: wps {
 141                         label = "tdw89x0:green:wps";
 142                         gpios = <&gpio 37 0>;
 143                 };
 144         };
 145 };
 146
 147 &spi {
 148         pinctrl-names = "default";
 149         pinctrl-0 = <&pins_spi_default>;
 150
 151         status = "ok";
 152
 153         m25p80@4 {
 154                 #address-cells = <1>;
 155                 #size-cells = <1>;
 156                 compatible = "jedec,spi-nor";
 157                 reg = <4 0>;
 158                 spi-max-frequency = <33250000>;
 159                 m25p,fast-read;
 160
 161                 partition@0 {
 162                         reg = <0x0 0x20000>;
 163                         label = "u-boot";
 164                         read-only;
 165                 };
 166
 167                 partition@20000 {
 168                         reg = <0x20000 0x7a0000>;
 169                         label = "firmware";
 170                 };
 171
 172                 partition@7c0000 {
 173                         reg = <0x7c0000 0x10000>;
 174                         label = "config";
 175                         read-only;
 176                 };
 177
 178                 ath9k_cal: partition@7d0000 {
 179                         reg = <0x7d0000 0x30000>;
 180                         label = "boardconfig";
 181                         read-only;
 182                 };
 183         };
 184 };
 185
 186 &eth0 {
 187         lan: interface@0 {
 188                 compatible = "lantiq,xrx200-pdi";
 189                 #address-cells = <1>;
 190                 #size-cells = <0>;
 191                 reg = <0>;
 192                 mtd-mac-address = <&ath9k_cal 0xf100>;
 193                 lantiq,switch;
 194
 195                 ethernet@0 {
 196                         compatible = "lantiq,xrx200-pdi-port";
 197                         reg = <0>;
 198                         phy-mode = "rgmii";
 199                         phy-handle = <&phy0>;
 200                         // gpios = <&gpio 42 1>;
 201                 };
 202                 ethernet@5 {
 203                         compatible = "lantiq,xrx200-pdi-port";
 204                         reg = <5>;
 205                         phy-mode = "rgmii";
 206                         phy-handle = <&phy5>;
 207                 };
 208                 ethernet@2 {
 209                         compatible = "lantiq,xrx200-pdi-port";
 210                         reg = <2>;
 211                         phy-mode = "gmii";
 212                         phy-handle = <&phy11>;
 213                 };
 214                 ethernet@3 {
 215                         compatible = "lantiq,xrx200-pdi-port";
 216                         reg = <4>;
 217                         phy-mode = "gmii";
 218                         phy-handle = <&phy13>;
 219                 };
 220         };
 221
 222         mdio@0 {
 223                 #address-cells = <1>;
 224                 #size-cells = <0>;
 225                 compatible = "lantiq,xrx200-mdio";
 226                 phy0: ethernet-phy@0 {
 227                         reg = <0x0>;
 228                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 229                 };
 230                 phy5: ethernet-phy@5 {
 231                         reg = <0x5>;
 232                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 233                 };
 234                 phy11: ethernet-phy@11 {
 235                         reg = <0x11>;
 236                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 237                 };
 238                 phy13: ethernet-phy@13 {
 239                         reg = <0x13>;
 240                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 241                 };
 242         };
 243 };