target/linux/lantiq/dts/TDW8970.dts

   1 /dts-v1/;
   2
   3 /include/ "vr9.dtsi"
   4
   5 / {
   6         model = "TDW8970 - TP-LINK TD-W8970";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit rootfstype=jffs2";
  10         };
  11
  12         memory@0 {
  13                 reg = <0x0 0x4000000>;
  14         };
  15
  16         fpi@10000000 {
  17                 gpio: pinmux@E100B10 {
  18                         pinctrl-names = "default";
  19                         pinctrl-0 = <&state_default>;
  20
  21                         state_default: pinmux {
  22                                 mdio {
  23                                         lantiq,groups = "mdio";
  24                                         lantiq,function = "mdio";
  25                                 };
  26                                 phy-rst {
  27                                         lantiq,pins = "io42";
  28                                         lantiq,pull = <0>;
  29                                         lantiq,open-drain = <0>;
  30                                         lantiq,output = <1>;
  31                                 };
  32                                 spi-in {
  33                                         lantiq,pins = "io16";
  34                                         lantiq,open-drain = <1>;
  35                                         lantiq,pull = <2>;
  36                                 };
  37                                 spi-out {
  38                                         lantiq,pins = "io10", "io17", "io18", "io21";
  39                                         lantiq,open-drain = <0>;
  40                                         lantiq,pull = <2>;
  41                                 };
  42                                 pcie-rst {
  43                                         lantiq,pins = "io38";
  44                                         lantiq,pull = <0>;
  45                                         lantiq,output = <1>;
  46                                 };
  47                         };
  48                 };
  49
  50                 eth@E108000 {
  51                         #address-cells = <1>;
  52                         #size-cells = <0>;
  53                         compatible = "lantiq,xrx200-net";
  54                         reg = < 0xE108000 0x3000 /* switch */
  55                                 0xE10B100 0x70 /* mdio */
  56                                 0xE10B1D8 0x30 /* mii */
  57                                 0xE10B308 0x30 /* pmac */
  58                         >;
  59                         interrupt-parent = <&icu0>;
  60                         interrupts = <73 72>;
  61
  62                         lan: interface@0 {
  63                                 compatible = "lantiq,xrx200-pdi";
  64                                 #address-cells = <1>;
  65                                 #size-cells = <0>;
  66                                 reg = <0>;
  67                                 mac-address = [ 00 11 22 33 44 55 ];
  68
  69                                 ethernet@0 {
  70                                         compatible = "lantiq,xrx200-pdi-port";
  71                                         reg = <0>;
  72                                         phy-mode = "rgmii";
  73                                         phy-handle = <&phy0>;
  74                                         // gpios = <&gpio 42 1>;
  75                                 };
  76                                 ethernet@5 {
  77                                         compatible = "lantiq,xrx200-pdi-port";
  78                                         reg = <5>;
  79                                         phy-mode = "rgmii";
  80                                         phy-handle = <&phy5>;
  81                                 };
  82                                 ethernet@2 {
  83                                         compatible = "lantiq,xrx200-pdi-port";
  84                                         reg = <2>;
  85                                         phy-mode = "gmii";
  86                                         phy-handle = <&phy11>;
  87                                 };
  88                                 ethernet@3 {
  89                                         compatible = "lantiq,xrx200-pdi-port";
  90                                         reg = <4>;
  91                                         phy-mode = "gmii";
  92                                         phy-handle = <&phy13>;
  93                                 };
  94                         };
  95
  96                         mdio@0 {
  97                                 #address-cells = <1>;
  98                                 #size-cells = <0>;
  99                                 compatible = "lantiq,xrx200-mdio";
 100                                 phy0: ethernet-phy@0 {
 101                                         reg = <0x0>;
 102                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 103                                 };
 104                                 phy5: ethernet-phy@5 {
 105                                         reg = <0x5>;
 106                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 107                                 };
 108                                 phy11: ethernet-phy@11 {
 109                                         reg = <0x11>;
 110                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 111                                 };
 112                                 phy13: ethernet-phy@13 {
 113                                         reg = <0x13>;
 114                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 115                                 };
 116                         };
 117                 };
 118
 119                 ifxhcd@E101000 {
 120                         status = "okay";
 121                         gpios = <&gpio 33 0>;
 122                         lantiq,portmask = <0x3>;
 123                 };
 124         };
 125
 126         gphy-xrx200 {
 127                 compatible = "lantiq,phy-xrx200";
 128                 firmware = "lantiq/vr9_phy11g_a2x.bin";
 129                 phys = [ 00 01 ];
 130         };
 131
 132         pcie {
 133                 compatible = "lantiq,pcie-xway";
 134         };
 135
 136         spi {
 137                 #address-cells = <1>;
 138                 #size-cells = <1>;
 139
 140                 compatible = "spi-gpio";
 141
 142                 gpio-miso = <&gpio 16 0>;
 143                 gpio-mosi = <&gpio 17 0>;
 144                 gpio-sck = <&gpio 18 0>;
 145                 num-chipselects = <1>;
 146                 cs-gpios = <&gpio 10 1>;
 147
 148                 m25p80@0 {
 149                         #address-cells = <1>;
 150                         #size-cells = <1>;
 151                         compatible = "en25q64", "m25p80";
 152                         reg = <0 0>;
 153                         linux,modalias = "en25q64";
 154                         spi-max-frequency = <1000000>;
 155
 156                         partition@0 {
 157                                 reg = <0x0 0x20000>;
 158                                 label = "u-boot";
 159                                 read-only;
 160                         };
 161
 162                         partition@20000 {
 163                                 reg = <0x20000 0x7a0000>;
 164                                 label = "firmware";
 165                         };
 166
 167                         partition@7c0000 {
 168                                 reg = <0x7c0000 0x10000>;
 169                                 label = "config";
 170                                 read-only;
 171                         };
 172
 173                         ath9k_cal: partition@7d0000 {
 174                                 reg = <0x7d0000 0x30000>;
 175                                 label = "boardconfig";
 176                                 read-only;
 177                         };
 178                 };
 179         };
 180
 181         ath9k_eep {
 182                 compatible = "ath9k,eeprom";
 183                 ath,eep-flash = <&ath9k_cal 0x21000>;
 184                 ath,pci-slot = <0>;
 185         };
 186
 187         gpio-keys-polled {
 188                 compatible = "gpio-keys-polled";
 189                 #address-cells = <1>;
 190                 #size-cells = <0>;
 191                 poll-interval = <100>;
 192                 power {
 193                         label = "reset";
 194                         gpios = <&gpio 0 1>;
 195                         linux,code = <0x100>;
 196                 };
 197
 198                 wifi {
 199                         label = "wifi";
 200                         gpios = <&gpio 9 0>;
 201                         linux,code = <0x101>;
 202                         linux,input-type = <5>; /* EV_SW */
 203                 };
 204
 205                 wps {
 206                         label = "wps";
 207                         gpios = <&gpio 39 1>;
 208                         linux,code = <0x102>;
 209                 };
 210         };
 211
 212         gpio-leds {
 213                 compatible = "gpio-leds";
 214
 215                 adsl {
 216                         label = "adsl";
 217                         gpios = <&gpio 4 0>;
 218                 };
 219                 internet {
 220                         label = "internet";
 221                         gpios = <&gpio 5 0>;
 222                 };
 223                 lan3 {
 224                         label = "lan3";
 225                         gpios = <&gpio 7 0>;
 226                 };
 227                 usb0 {
 228                         label = "usb";
 229                         gpios = <&gpio 19 0>;
 230                 };
 231                 usb2 {
 232                         label = "usb2";
 233                         gpios = <&gpio 20 0>;
 234                 };
 235                 wps {
 236                         label = "wps";
 237                         gpios = <&gpio 37 0>;
 238                 };
 239                 lan4 {
 240                         label = "lan4";
 241                         gpios = <&gpio 45 0>;
 242                 };
 243         };
 244 };