target/linux/lantiq/dts/P2601HNFX.dts

   1 /dts-v1/;
   2
   3 /include/ "ar9.dtsi"
   4
   5 / {
   6         model = "P2601HNFX - ZyXEL P-2601HN-Fx";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10
  11                 leds {
  12                         boot = &power_green;
  13                         failsafe = &power_red;
  14                         running = &power_green;
  15
  16                         dsl = &dsl;
  17                         internet = &online;
  18                         wifi = &wifi;
  19                 };
  20         };
  21
  22         memory@0 {
  23                 reg = <0x0 0x4000000>;
  24         };
  25
  26         fpi@10000000 {
  27                 #address-cells = <1>;
  28                 #size-cells = <1>;
  29                 localbus@0 {
  30                         #address-cells = <2>;
  31                         #size-cells = <1>;
  32                         ranges = <0 0 0x0 0x3ffffff
  33                                   1 0 0x4000000 0x4000010>;
  34                         compatible = "lantiq,localbus", "simple-bus";
  35
  36                         nor-boot@0 {
  37                                 compatible = "lantiq,nor";
  38                                 bank-width = <2>;
  39                                 reg = <0 0x0 0x2000000>;
  40                                 #address-cells = <1>;
  41                                 #size-cells = <1>;
  42
  43                                 partitions {
  44                                         compatible = "fixed-partitions";
  45                                         #address-cells = <1>;
  46                                         #size-cells = <1>;
  47
  48                                         partition@0 {
  49                                                 label = "uboot";
  50                                                 reg = <0x00000 0x40000>;
  51                                                 read-only;
  52                                         };
  53
  54                                         partition@40000 {
  55                                                 label = "uboot_env";
  56                                                 reg = <0x40000 0x20000>;
  57                                                 read-only;
  58                                         };
  59
  60                                         partition@60000 {
  61                                                 label = "firmware";
  62                                                 reg = <0x60000 0xfa0000>;
  63                                         };
  64                                 };
  65                         };
  66                 };
  67
  68                 gpio: pinmux@E100B10 {
  69                         compatible = "lantiq,pinctrl-xr9";
  70                         pinctrl-names = "default";
  71                         pinctrl-0 = <&state_default>;
  72
  73                         #gpio-cells = <2>;
  74                         gpio-controller;
  75                         reg = <0xE100B10 0xA0>;
  76
  77                         state_default: pinmux {
  78                                 stp {
  79                                         lantiq,groups = "stp";
  80                                         lantiq,function = "stp";
  81                                         lantiq,pull = <2>;
  82                                         lantiq,open-drain = <0>;
  83                                         lantiq,output = <1>;
  84                                 };
  85                                 exin {
  86                                         lantiq,groups = "exin1";
  87                                         lantiq,function = "exin";
  88                                 };
  89                                 pci {
  90                                         lantiq,groups = "gnt1";
  91                                         lantiq,function = "pci";
  92                                 };
  93                                 conf_out {
  94                                         lantiq,pins = "io4", "io5", "io6";
  95                                         lantiq,open-drain;
  96                                         lantiq,pull = <0>;
  97                                 };
  98                                 mdio {
  99                                         lantiq,groups = "mdio";
 100                                         lantiq,function = "mdio";
 101                                 };
 102                         };
 103                 };
 104
 105                 etop@E180000 {
 106                         phy-mode = "rmii";
 107                 };
 108
 109                 ifxhcd@E101000 {
 110                         status = "okay";
 111                         gpios = <&gpio 9 0>;
 112                 };
 113
 114                 stp: stp@E100BB0 {
 115                         #gpio-cells = <2>;
 116                         compatible = "lantiq,gpio-stp-xway";
 117                         gpio-controller;
 118                         reg = <0xE100BB0 0x40>;
 119
 120                         lantiq,shadow = <0xfff>;
 121                         lantiq,groups = <0x3>;
 122                 };
 123
 124                 pci@E105400 {
 125                         lantiq,bus-clock = <33333333>;
 126                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 127                         interrupt-map = <0x7000 0 0 1 &icu0 29 1>;
 128                         gpios-reset = <&gpio 21 0>;
 129                         req-mask = <0x1>;
 130                 };
 131         };
 132
 133         gpio-keys-polled {
 134                 compatible = "gpio-keys-polled";
 135                 #address-cells = <1>;
 136                 #size-cells = <0>;
 137                 poll-interval = <100>;
 138
 139                 reset {
 140                         label = "reset";
 141                         gpios = <&gpio 53 1>;
 142                         linux,code = <0x198>;
 143                 };
 144                 rfkill {
 145                         label = "rfkill";
 146                         gpios = <&gpio 54 1>;
 147                         linux,code = <0xf7>;
 148                 };
 149         };
 150
 151         gpio-leds {
 152                 compatible = "gpio-leds";
 153
 154                 power_green: power {
 155                         label = "p2601hnfx:green:power";
 156                         gpios = <&stp 11 1>;
 157                         default-state = "keep";
 158                 };
 159                 power_red: power2 {
 160                         label = "p2601hnfx:red:power";
 161                         gpios = <&gpio 29 1>;
 162                 };
 163                 online: online {
 164                         label = "p2601hnfx:green:internet";
 165                         gpios = <&stp 13 1>;
 166                 };
 167                 online2 {
 168                         label = "p2601hnfx:red:internet";
 169                         gpios = <&stp 12 1>;
 170                 };
 171                 dsl: dsl {
 172                         label = "p2601hnfx:green:dsl";
 173                         gpios = <&stp 14 1>;
 174                 };
 175                 phone {
 176                         label = "p2601hnfx:green:phone";
 177                         gpios = <&stp 9 1>;
 178                 };
 179                 phone2 {
 180                         label = "p2601hnfx:orange:phone";
 181                         gpios = <&stp 8 1>;
 182                 };
 183                 wifi: wifi {
 184                         label = "p2601hnfx:green:wireless";
 185                         gpios = <&stp 15 1>;
 186                 };
 187                 wifi2 {
 188                         label = "p2601hnfx:orange:wireless";
 189                         gpios = <&stp 10 1>;
 190                 };
 191         };
 192
 193         gpio_export {
 194                 compatible = "gpio-export";
 195                 #size-cells = <0>;
 196
 197                 switch {
 198                         gpio-export,name = "switch";
 199                         gpio-export,output = <1>;
 200                         gpios = <&gpio 50 0>;
 201                 };
 202                 usb {
 203                         gpio-export,name = "wifi";
 204                         gpio-export,output = <1>;
 205                         gpios = <&gpio 9 0>;
 206                 };
 207         };
 208 };