target/linux/lantiq/dts/FRITZ3370.dts

   1 /dts-v1/;
   2
   3 /include/ "vr9.dtsi"
   4
   5 / {
   6         model = "FRITZ3370 - Fritz!Box WLAN 3370";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit rootfstype=jffs2";
  10         };
  11
  12         memory@0 {
  13                 reg = <0x0 0x8000000>;
  14         };
  15
  16         fpi@10000000 {
  17                 localbus@0 {
  18                         nand-parts@0 {
  19                                 compatible = "gen_nand", "lantiq,nand-xway";
  20                                 bank-width = <2>;
  21                                 reg = <1 0x0 0x2000000>;
  22                                 #address-cells = <1>;
  23                                 #size-cells = <1>;
  24
  25                                 partition@0 {
  26                                         label = "kernel";
  27                                         reg = <0x00000 0x400000>;
  28                                 };
  29
  30                                 partition@400000 {
  31                                         label = "rootfs";
  32                                         reg = <0x400000 0x3000000>;
  33                                 };
  34
  35                                 partition@3400000 {
  36                                         label = "vr9_firmware";
  37                                         reg = <0x3400000 0x400000>;
  38                                 };
  39                                 partition@3800000 {
  40                                         label = "reserved";
  41                                         reg = <0x3800000 0x3000000>;
  42                                 };
  43                                 partition@6800000 {
  44                                         label = "config";
  45                                         reg = <0x6800000 0x200000>;
  46                                 };
  47                                 partition@6a00000 {
  48                                         label = "nand-filesystem";
  49                                         reg = <0x6a00000 0x1600000>;
  50                                 };
  51                         };
  52                 };
  53
  54                 spi@E100800 {
  55                         compatible = "lantiq,spi-xway-broken";
  56                         reg = <0xE100800 0x100>;
  57                         interrupt-parent = <&icu0>;
  58                         interrupts = <22 23 24>;
  59                         #address-cells = <1>;
  60                         #size-cells = <1>;
  61
  62                         m25p80@0 {
  63                                 #address-cells = <1>;
  64                                 #size-cells = <1>;
  65                                 compatible = "s25fl129p0";
  66                                 reg = <0 0>;
  67                                 linux,modalias = "m25p80", "mx25l3205d";
  68                                 spi-max-frequency = <1000000>;
  69
  70                                 partition@0 {
  71                                         reg = <0x0 0x20000>;
  72                                         label = "SPI (RO) U-Boot Image";
  73                                         read-only;
  74                                 };
  75
  76                                 partition@20000 {
  77                                         reg = <0x20000 0x10000>;
  78                                         label = "ENV_MAC";
  79                                         read-only;
  80                                 };
  81
  82                                 partition@30000 {
  83                                         reg = <0x30000 0x10000>;
  84                                         label = "DPF";
  85                                         read-only;
  86                                 };
  87
  88                                 partition@40000 {
  89                                         reg = <0x40000 0x10000>;
  90                                         label = "NVRAM";
  91                                         read-only;
  92                                 };
  93
  94                                 partition@500000 {
  95                                         reg = <0x50000 0x003a0000>;
  96                                         label = "kernel";
  97                                 };
  98                         };
  99                 };
 100
 101                 gpio: pinmux@E100B10 {
 102                         pinctrl-names = "default";
 103                         pinctrl-0 = <&state_default>;
 104
 105                         state_default: pinmux {
 106                                 spi {
 107                                         lantiq,groups = "spi", "spi_cs4";
 108                                         lantiq,function = "spi";
 109                                 };
 110                                 nand_out {
 111                                         lantiq,groups = "nand cle", "nand ale", "nand rd", "ebu a23", "ebu a24";
 112                                         lantiq,function = "ebu";
 113                                         lantiq,direction = <1>;
 114                                         lantiq,pull = <0>;
 115                                 };
 116                                 nand_in {
 117                                         lantiq,groups = "nand rdy";
 118                                         lantiq,function = "ebu";
 119                                         lantiq,direction = <0>;
 120                                         lantiq,open-drain = <1>;
 121                                         lantiq,pull = <2>;
 122                                 };
 123                                 mdio {
 124                                         lantiq,groups = "mdio";
 125                                         lantiq,function = "mdio";
 126                                 };
 127                                 phy-rst {
 128                                         lantiq,pins = "io37", "io44";
 129                                         lantiq,pull = <0>;
 130                                         lantiq,open-drain = <0>;
 131                                         lantiq,output = <1>;
 132                                 };
 133                                 pcie-rst {
 134                                         lantiq,pins = "io38";
 135                                         lantiq,pull = <0>;
 136                                         lantiq,output = <1>;
 137                                 };
 138                         };
 139                 };
 140
 141                 eth@E108000 {
 142                         #address-cells = <1>;
 143                         #size-cells = <0>;
 144                         compatible = "lantiq,xrx200-net";
 145                         reg = < 0xE108000 0x3000 /* switch */
 146                                 0xE10B100 0x70 /* mdio */
 147                                 0xE10B1D8 0x30 /* mii */
 148                                 0xE10B308 0x30 /* pmac */
 149                         >;
 150                         interrupt-parent = <&icu0>;
 151                         interrupts = <73 72>;
 152
 153                         lan: interface@0 {
 154                                 compatible = "lantiq,xrx200-pdi";
 155                                 #address-cells = <1>;
 156                                 #size-cells = <0>;
 157                                 reg = <0>;
 158                                 mac-address = [ 00 11 22 33 44 55 ];
 159
 160                                 ethernet@0 {
 161                                         compatible = "lantiq,xrx200-pdi-port";
 162                                         reg = <0>;
 163                                         phy-mode = "rgmii";
 164                                         phy-handle = <&phy0>;
 165                                         gpios = <&gpio 37 0>;
 166                                 };
 167                                 ethernet@1 {
 168                                         compatible = "lantiq,xrx200-pdi-port";
 169                                         reg = <1>;
 170                                         phy-mode = "rgmii";
 171                                         phy-handle = <&phy1>;
 172                                         gpios = <&gpio 44 0>;
 173                                 };
 174                                 ethernet@2 {
 175                                         compatible = "lantiq,xrx200-pdi-port";
 176                                         reg = <2>;
 177                                         phy-mode = "gmii";
 178                                         phy-handle = <&phy11>;
 179                                 };
 180                                 ethernet@3 {
 181                                         compatible = "lantiq,xrx200-pdi-port";
 182                                         reg = <4>;
 183                                         phy-mode = "gmii";
 184                                         phy-handle = <&phy13>;
 185                                 };
 186                         };
 187
 188                         mdio@0 {
 189                                 #address-cells = <1>;
 190                                 #size-cells = <0>;
 191                                 compatible = "lantiq,xrx200-mdio";
 192                                 phy0: ethernet-phy@0 {
 193                                         reg = <0x0>;
 194                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 195                                         lantiq,c45-reg-init = <1 0 0 0>;
 196                                 };
 197                                 phy1: ethernet-phy@1 {
 198                                         reg = <0x1>;
 199                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 200                                         lantiq,c45-reg-init = <1 0 0 0>;
 201                                 };
 202                                 phy11: ethernet-phy@11 {
 203                                         reg = <0x11>;
 204                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 205                                         lantiq,c45-reg-init = <1 0 0 0>;
 206                                 };
 207                                 phy13: ethernet-phy@13 {
 208                                         reg = <0x13>;
 209                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 210                                         lantiq,c45-reg-init = <1 0 0 0>;
 211                                 };
 212                         };
 213                 };
 214
 215                 ifxhcd@E101000 {
 216                         status = "okay";
 217                         gpios = <&gpio 5 0
 218                                 &gpio 14 0>;
 219                         lantiq,portmask = <0x3>;
 220                 };
 221         };
 222
 223         gphy-xrx200 {
 224                 compatible = "lantiq,phy-xrx200";
 225                 firmware = "lantiq/vr9_phy11g_a1x.bin";
 226                 phys = [ 00 01 ];
 227         };
 228
 229         gpio-keys-polled {
 230                 compatible = "gpio-keys-polled";
 231                 #address-cells = <1>;
 232                 #size-cells = <0>;
 233                 poll-interval = <100>;
 234                 power {
 235                         label = "power";
 236                         gpios = <&gpio 1 0>;
 237                         linux,code = <0x100>;
 238                 };
 239 /*              wifi {
 240                         label = "wifi";
 241                         gpios = <&gpio 29 0>;
 242                         linux,code = <0x101>;
 243                 };*/
 244         };
 245
 246         gpio-leds {
 247                 compatible = "gpio-leds";
 248
 249                 power {
 250                         label = "power";
 251                         gpios = <&gpio 32 1>;
 252                 };
 253                 power2 {
 254                         label = "power2";
 255                         gpios = <&gpio 33 1>;
 256                 };
 257                 info_red {
 258                         label = "info_red";
 259                         gpios = <&gpio 34 1>;
 260                 };
 261                 wifi {
 262                         label = "wifi";
 263                         gpios = <&gpio 35 1>;
 264                 };
 265                 dsl {
 266                         label = "dsl";
 267                         gpios = <&gpio 36 1>;
 268                 };
 269                 lan {
 270                         label = "lan";
 271                         gpios = <&gpio 38 1>;
 272                 };
 273                 info_green {
 274                         label = "info_green";
 275                         gpios = <&gpio 47 1>;
 276                 };
 277         };
 278 };