target/linux/lantiq/dts/BTHOMEHUBV5A.dts

   1 /dts-v1/;
   2
   3 /include/ "vr9.dtsi"
   4
   5 / {
   6         model = "BTHOMEHUBV5A - BT Home Hub 5A";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10
  11                 leds {
  12                         internet = &broadband_blue;
  13                         wifi = &wireless_blue;
  14                 };
  15         };
  16
  17         memory@0 {
  18                 reg = <0x0 0x8000000>;
  19         };
  20
  21         fpi@10000000 {
  22                 localbus@0 {
  23                         nand-parts@0 {
  24                                 compatible = "gen_nand", "lantiq,nand-xway";
  25                                 lantiq,cs = <1>;
  26                                 bank-width = <2>;
  27                                 reg = <0 0x0 0x2000000>;
  28                                 #address-cells = <1>;
  29                                 #size-cells = <1>;
  30
  31                                 partition@0 {
  32                                         label = "u-boot";
  33                                         reg = <0x0 0x40000>;
  34                                         read-only;
  35                                 };
  36                                 partition@40000 {
  37                                         label = "uboot-env";
  38                                         reg = <0x40000 0x40000>;
  39                                 };
  40                                 caldata: partition@80000 {
  41                                         label = "caldata";
  42                                         reg = <0x80000 0x20000>;
  43                                         read-only;
  44                                 };
  45                                 partition@a0000 {
  46                                         label = "kernel";
  47                                         reg = <0xa0000 0x200000>;
  48                                 };
  49                                 partition@2a0000 {
  50                                         label = "ubi";
  51                                         reg = <0x2a0000 0x7d60000>;
  52                                 };
  53                         };
  54                 };
  55
  56                 gpio: pinmux@E100B10 {
  57                         pinctrl-names = "default";
  58                         pinctrl-0 = <&state_default>;
  59
  60                         interrupt-parent = <&icu0>;
  61                         interrupts = <166 135 66 40 41 42 38>;
  62
  63                         state_default: pinmux {
  64                                 mdio {
  65                                         lantiq,groups = "mdio";
  66                                         lantiq,function = "mdio";
  67                                 };
  68                                 pci_rst {
  69                                         lantiq,pins = "io21";
  70                                         lantiq,output = <1>;
  71                                         lantiq,open-drain;
  72                                 };
  73                                 pcie_rst {
  74                                         lantiq,pins = "io38";
  75                                         lantiq,pull = <0>;
  76                                         lantiq,output = <1>;
  77                                         lantiq,open-drain;
  78                                 };
  79                                 usb_vbus {
  80                                         lantiq,pins = "io33";
  81                                         lantiq,pull = <0>;
  82                                         lantiq,open-drain = <0>;
  83                                         lantiq,output = <1>;
  84                                 };
  85                                 nand_out {
  86                                         lantiq,groups = "nand cle", "nand ale";
  87                                         lantiq,function = "ebu";
  88                                         lantiq,output = <1>;
  89                                         lantiq,open-drain = <0>;
  90                                         lantiq,pull = <0>;
  91                                 };
  92                                 nand_cs1 {
  93                                         lantiq,groups = "nand cs1";
  94                                         lantiq,function = "ebu";
  95                                         lantiq,open-drain = <0>;
  96                                         lantiq,pull = <0>;
  97                                 };
  98                         };
  99                 };
 100
 101                 eth@E108000 {
 102                         #address-cells = <1>;
 103                         #size-cells = <0>;
 104                         compatible = "lantiq,xrx200-net";
 105                         reg = < 0xE108000 0x3000        /* switch */
 106                                 0xE10B100 0x70          /* mdio */
 107                                 0xE10B1D8 0x30          /* mii */
 108                                 0xE10B308 0x30 >;       /* pmac */
 109                         interrupt-parent = <&icu0>;
 110                         interrupts = <73 72>;
 111
 112                         lan: interface@0 {
 113                                 compatible = "lantiq,xrx200-pdi";
 114                                 #address-cells = <1>;
 115                                 #size-cells = <0>;
 116                                 reg = <0>;
 117                                 mtd-mac-address = <&caldata 0x110c>;
 118                                 lantiq,switch;
 119
 120                                 ethernet@0 {
 121                                         compatible = "lantiq,xrx200-pdi-port";
 122                                         reg = <0>;
 123                                         phy-mode = "rgmii";
 124                                         phy-handle = <&phy0>;
 125                                 };
 126                                 ethernet@1 {
 127                                         compatible = "lantiq,xrx200-pdi-port";
 128                                         reg = <1>;
 129                                         phy-mode = "rgmii";
 130                                         phy-handle = <&phy1>;
 131                                 };
 132                                 ethernet@2 {
 133                                         compatible = "lantiq,xrx200-pdi-port";
 134                                         reg = <2>;
 135                                         phy-mode = "gmii";
 136                                         phy-handle = <&phy11>;
 137                                 };
 138                                 ethernet@4 {
 139                                         compatible = "lantiq,xrx200-pdi-port";
 140                                         reg = <4>;
 141                                         phy-mode = "gmii";
 142                                         phy-handle = <&phy13>;
 143                                 };
 144                         };
 145
 146                         wan: interface@1 {
 147                                 compatible = "lantiq,xrx200-pdi";
 148                                 #address-cells = <1>;
 149                                 #size-cells = <0>;
 150                                 reg = <1>;
 151                                 mtd-mac-address = <&caldata 0x110c>;
 152                                 mtd-mac-address-increment = <4>;
 153                                 lantiq,wan;
 154
 155                                 ethernet@5 {
 156                                         compatible = "lantiq,xrx200-pdi-port";
 157                                         reg = <5>;
 158                                         phy-mode = "rgmii";
 159                                         phy-handle = <&phy5>;
 160                                 };
 161                         };
 162
 163                         mdio@0 {
 164                                 #address-cells = <1>;
 165                                 #size-cells = <0>;
 166                                 compatible = "lantiq,xrx200-mdio";
 167
 168                                 phy0: ethernet-phy@0 {
 169                                         reg = <0x0>;
 170                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 171                                 };
 172                                 phy1: ethernet-phy@1 {
 173                                         reg = <0x1>;
 174                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 175                                 };
 176                                 phy5: ethernet-phy@5 {
 177                                         reg = <0x5>;
 178                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 179                                 };
 180                                 phy11: ethernet-phy@11 {
 181                                         reg = <0x11>;
 182                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 183                                 };
 184                                 phy13: ethernet-phy@13 {
 185                                         reg = <0x13>;
 186                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 187                                 };
 188                         };
 189                 };
 190
 191                 ifxhcd@E101000 {
 192                         status = "okay";
 193                         gpios = <&gpio 33 0>;
 194                 };
 195
 196                 pci@E105400 {
 197                         status = "okay";
 198                         lantiq,bus-clock = <33333333>;
 199                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 200                         interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
 201                         gpio-reset = <&gpio 21 0>;
 202                 };
 203         };
 204
 205         gphy-xrx200 {
 206                 compatible = "lantiq,phy-xrx200";
 207                 firmware1 = "lantiq/vr9_phy11g_a1x.bin";        /*VR9 1.1*/
 208                 firmware2 = "lantiq/vr9_phy11g_a2x.bin";        /*VR9 1.2*/
 209                 phys = [ 00 01 ];
 210         };
 211
 212         ath9k_eep {
 213                 compatible = "ath9k,eeprom";
 214                 ath,eep-flash = <&caldata 0x1000>;
 215                 ath,mac-offset = <0x110c>;
 216                 ath,mac-increment = <2>;
 217                 ath,pci-slot = <0xe>; /* 14 */
 218         };
 219
 220         gpio-keys-polled {
 221                 compatible = "gpio-keys-polled";
 222                 #address-cells = <1>;
 223                 #size-cells = <0>;
 224                 poll-interval = <100>;
 225
 226                 reset {
 227                         label = "reset";
 228                         gpios = <&gpio 2 1>;
 229                         linux,code = <0x198>;
 230                 };
 231
 232                 wps {
 233                         label = "wps";
 234                         gpios = <&gpio 25 1>;
 235                         linux,code = <0x211>;
 236                 };
 237
 238                 restart {
 239                         label = "restart";
 240                         gpios = <&gpio 39 1>;
 241                         linux,code = <0x198>;
 242                 };
 243         };
 244
 245         gpio-leds {
 246                 compatible = "gpio-leds";
 247
 248                 broadband-red {
 249                         label = "soc:red:broadband";
 250                         gpios = <&gpio 0 1>;
 251                 };
 252                 broadband-green {
 253                         label = "soc:green:broadband";
 254                         gpios = <&gpio 3 1>;
 255                 };
 256                 broadband_blue: broadband-blue {
 257                         label = "soc:blue:broadband";
 258                         gpios = <&gpio 8 1>;
 259                 };
 260
 261                 wireless-red {
 262                         label = "soc:red:wireless";
 263                         gpios = <&gpio 9 1>;
 264                 };
 265                 wireless-green {
 266                         label = "soc:green:wireless";
 267                         gpios = <&gpio 10 1>;
 268                 };
 269                 wireless_blue: wireless-blue {
 270                         label = "soc:blue:wireless";
 271                         gpios = <&gpio 11 1>;
 272                 };
 273
 274                 power-red {
 275                         label = "soc:red:power";
 276                         gpios = <&gpio 12 1>;
 277                 };
 278                 power-green {
 279                         label = "soc:green:power";
 280                         gpios = <&gpio 14 1>;
 281                 };
 282                 power-blue {
 283                         label = "soc:blue:power";
 284                         gpios = <&gpio 15 1>;
 285                 };
 286
 287                 dimmed {
 288                         label = "dimmed";
 289                         gpios = <&gpio 19 0>;
 290                 };
 291         };
 292 };