target/linux/lantiq/dts/ARV7519PW.dts

   1 /dts-v1/;
   2
   3 /include/ "danube.dtsi"
   4
   5 / {
   6         model = "ARV7519PW - Astoria Networks";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10
  11                 leds {
  12                         boot = &power;
  13                         failsafe = &power2;
  14                         running = &power;
  15
  16                         dsl = &dsl;
  17                         internet = &online;
  18                         wifi = &wifi;
  19                 };
  20         };
  21
  22         memory@0 {
  23                 reg = <0x0 0x4000000>;
  24         };
  25
  26         sram@1F000000 {
  27                 vmmc@107000 {
  28                         status = "okay";
  29                 };
  30         };
  31
  32         fpi@10000000 {
  33                 localbus@0 {
  34                         nor-boot@0 {
  35                                 compatible = "lantiq,nor";
  36                                 bank-width = <2>;
  37                                 reg = <0 0x0 0x2000000>;
  38                                 #address-cells = <1>;
  39                                 #size-cells = <1>;
  40
  41                                 partition@0 {
  42                                         label = "uboot";
  43                                         reg = <0x00000 0x40000>;
  44                                         read-only;
  45                                 };
  46
  47                                 partition@40000 {
  48                                         label = "uboot_env";
  49                                         reg = <0x40000 0x20000>;
  50                                 };
  51
  52                                 partition@60000 {
  53                                         label = "firmware";
  54                                         reg = <0x60000 0xf80000>;
  55                                 };
  56
  57                                 partition@fe0000 {
  58                                         label = "board_config";
  59                                         reg = <0xfe0000 0x20000>;
  60                                         read-only;
  61                                 };
  62                         };
  63
  64                         mac_addr {
  65                                 compatible = "lantiq,eth-mac";
  66                                 reg = <0 0xfe0016 0x6>;
  67                                 mac-increment = <2>;
  68                         };
  69                 };
  70
  71                 gpio: pinmux@E100B10 {
  72                         pinctrl-names = "default";
  73                         pinctrl-0 = <&state_default>;
  74
  75                         state_default: pinmux {
  76                                 ebu {
  77                                         lantiq,groups = "ebu cs1";
  78                                         lantiq,function = "ebu";
  79                                 };
  80                                 pci_in {
  81                                         lantiq,groups = "req1";
  82                                         lantiq,function = "pci";
  83                                         lantiq,open-drain = <1>;
  84                                         lantiq,pull = <2>;
  85                                         lantiq,output = <0>;
  86                                 };
  87                                 pci_out {
  88                                         lantiq,groups = "gnt1";
  89                                         lantiq,function = "pci";
  90                                         lantiq,pull = <0>;
  91                                         lantiq,output = <1>;
  92                                 };
  93                                 pci_rst {
  94                                         lantiq,pins = "io21";
  95                                         lantiq,pull = <2>;
  96                                         lantiq,output = <1>;
  97                                 };
  98                                 switch_rst {
  99                                         lantiq,pins = "io19";
 100                                         lantiq,pull = <2>;
 101                                         lantiq,output = <1>;
 102                                 };
 103                         };
 104                 };
 105
 106                 etop@E180000 {
 107                         phy-mode = "mii";
 108                 };
 109
 110                 /* warning: passive port
 111                 only works with active devices */
 112                 ifxhcd@E101000 {
 113                         status = "okay";
 114                 };
 115
 116                 pci@E105400 {
 117                         status = "okay";
 118                         lantiq,external-clock;
 119                         gpio-reset = <&gpio 21 0>;
 120                         req-mask = <0xf>;
 121                 };
 122         };
 123
 124         ralink_eep {
 125                 compatible = "ralink,eeprom";
 126                 ralink,eeprom = "RT2860.eeprom";
 127         };
 128
 129         gpio-keys-polled {
 130                 compatible = "gpio-keys-polled";
 131                 #address-cells = <1>;
 132                 #size-cells = <0>;
 133                 poll-interval = <100>;
 134
 135                 rfkill {
 136                         label = "rfkill";
 137                         gpios = <&gpio 11 1>;
 138                         linux,code = <0xf7>;
 139                 };
 140                 reset {
 141                         label = "reset";
 142                         gpios = <&gpio 28 1>;
 143                         linux,code = <0x198>;
 144                 };
 145         };
 146
 147         gpio-leds {
 148                 compatible = "gpio-leds";
 149                 power: power {
 150                         label = "power";
 151                         gpios = <&gpio 2 1>;
 152                         default-state = "keep";
 153                 };
 154                 power2: power2 {
 155                         label = "power2";
 156                         gpios = <&gpio 14 1>;
 157                 };
 158                 online: online {
 159                         label = "online";
 160                         gpios = <&gpio 3 1>;
 161                 };
 162                 online2 {
 163                         label = "online2";
 164                         gpios = <&gpio 30 1>;
 165                 };
 166                 wifi: wifi {
 167                         label = "wifi";
 168                         gpios = <&gpio 12 1>;
 169                 };
 170                 wifi2 {
 171                         label = "wifi2";
 172                         gpios = <&gpio 10 1>;
 173                 };
 174                 wifi3 {
 175                         label = "wifi3";
 176                         gpios = <&gpio 6 1>;
 177                 };
 178                 voice {
 179                         label = "voice";
 180                         gpios = <&gpio 31 1>;
 181                 };
 182                 wps {
 183                         label = "wps";
 184                         gpios = <&gpio 15 1>;
 185                 };
 186                 wps2 {
 187                         label = "wps2";
 188                         gpios = <&gpio 7 1>;
 189                 };
 190                 wps3 {
 191                         label = "wps3";
 192                         gpios = <&gpio 23 1>;
 193                 };
 194                 dsl: dsl {
 195                         label = "dsl";
 196                         gpios = <&gpio 4 1>;
 197                 };
 198                 lan {
 199                         label = "lan";
 200                         gpios = <&gpio 1 1>;
 201                 };
 202                 tv {
 203                         label = "tv";
 204                         gpios = <&gpio 20 1>;
 205                 };
 206                 upgrade {
 207                         label = "upgrade";
 208                         gpios = <&gpio 29 1>;
 209                 };
 210         };
 211
 212         /* is there another way to "reserve" the GPIO? */
 213         gpio_export {
 214                 compatible = "gpio-export";
 215                 #size-cells = <0>;
 216
 217                 switch {
 218                         gpio-export,name = "switch";
 219                         gpio-export,output = <1>;
 220                         gpios = <&gpio 19 0>;
 221                 };
 222         };
 223 };