target/linux/lantiq/dts/ARV7519PW.dts

   1 /dts-v1/;
   2
   3 /include/ "danube.dtsi"
   4
   5 / {
   6         model = "ARV7519PW - Astoria Networks";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10
  11                 leds {
  12                         boot = &power;
  13                         failsafe = &power2;
  14                         running = &power;
  15
  16                         dsl = &dsl;
  17                         internet = &online;
  18                         wifi = &wifi;
  19                 };
  20         };
  21
  22         memory@0 {
  23                 reg = <0x0 0x4000000>;
  24         };
  25
  26         sram@1F000000 {
  27                 vmmc@107000 {
  28                         status = "okay";
  29                 };
  30         };
  31
  32         fpi@10000000 {
  33                 localbus@0 {
  34                         nor-boot@0 {
  35                                 compatible = "lantiq,nor";
  36                                 bank-width = <2>;
  37                                 reg = <0 0x0 0x2000000>;
  38                                 #address-cells = <1>;
  39                                 #size-cells = <1>;
  40
  41                                 partitions {
  42                                         compatible = "fixed-partitions";
  43                                         #address-cells = <1>;
  44                                         #size-cells = <1>;
  45
  46                                         partition@0 {
  47                                                 label = "uboot";
  48                                                 reg = <0x00000 0x40000>;
  49                                                 read-only;
  50                                         };
  51
  52                                         partition@40000 {
  53                                                 label = "uboot_env";
  54                                                 reg = <0x40000 0x20000>;
  55                                         };
  56
  57                                         partition@60000 {
  58                                                 label = "firmware";
  59                                                 reg = <0x60000 0xf80000>;
  60                                         };
  61
  62                                         partition@fe0000 {
  63                                                 label = "board_config";
  64                                                 reg = <0xfe0000 0x20000>;
  65                                                 read-only;
  66                                         };
  67                                 };
  68                         };
  69
  70                         mac_addr {
  71                                 compatible = "lantiq,eth-mac";
  72                                 reg = <0 0xfe0016 0x6>;
  73                                 mac-increment = <2>;
  74                         };
  75                 };
  76
  77                 gpio: pinmux@E100B10 {
  78                         pinctrl-names = "default";
  79                         pinctrl-0 = <&state_default>;
  80
  81                         state_default: pinmux {
  82                                 ebu {
  83                                         lantiq,groups = "ebu cs1";
  84                                         lantiq,function = "ebu";
  85                                 };
  86                                 pci_in {
  87                                         lantiq,groups = "req1";
  88                                         lantiq,function = "pci";
  89                                         lantiq,open-drain = <1>;
  90                                         lantiq,pull = <2>;
  91                                         lantiq,output = <0>;
  92                                 };
  93                                 pci_out {
  94                                         lantiq,groups = "gnt1";
  95                                         lantiq,function = "pci";
  96                                         lantiq,pull = <0>;
  97                                         lantiq,output = <1>;
  98                                 };
  99                                 pci_rst {
 100                                         lantiq,pins = "io21";
 101                                         lantiq,pull = <2>;
 102                                         lantiq,output = <1>;
 103                                 };
 104                                 switch_rst {
 105                                         lantiq,pins = "io19";
 106                                         lantiq,pull = <2>;
 107                                         lantiq,output = <1>;
 108                                 };
 109                         };
 110                 };
 111
 112                 etop@E180000 {
 113                         phy-mode = "mii";
 114                 };
 115
 116                 /* warning: passive port
 117                 only works with active devices */
 118                 ifxhcd@E101000 {
 119                         status = "okay";
 120                 };
 121
 122                 pci@E105400 {
 123                         status = "okay";
 124                         lantiq,external-clock;
 125                         gpio-reset = <&gpio 21 0>;
 126                         req-mask = <0xf>;
 127                 };
 128         };
 129
 130         ralink_eep {
 131                 compatible = "ralink,eeprom";
 132                 ralink,eeprom = "RT2860.eeprom";
 133         };
 134
 135         gpio-keys-polled {
 136                 compatible = "gpio-keys-polled";
 137                 #address-cells = <1>;
 138                 #size-cells = <0>;
 139                 poll-interval = <100>;
 140
 141                 rfkill {
 142                         label = "rfkill";
 143                         gpios = <&gpio 11 1>;
 144                         linux,code = <0xf7>;
 145                 };
 146                 reset {
 147                         label = "reset";
 148                         gpios = <&gpio 28 1>;
 149                         linux,code = <0x198>;
 150                 };
 151         };
 152
 153         gpio-leds {
 154                 compatible = "gpio-leds";
 155                 power: power {
 156                         label = "power";
 157                         gpios = <&gpio 2 1>;
 158                         default-state = "keep";
 159                 };
 160                 power2: power2 {
 161                         label = "power2";
 162                         gpios = <&gpio 14 1>;
 163                 };
 164                 online: online {
 165                         label = "online";
 166                         gpios = <&gpio 3 1>;
 167                 };
 168                 online2 {
 169                         label = "online2";
 170                         gpios = <&gpio 30 1>;
 171                 };
 172                 wifi: wifi {
 173                         label = "wifi";
 174                         gpios = <&gpio 12 1>;
 175                 };
 176                 wifi2 {
 177                         label = "wifi2";
 178                         gpios = <&gpio 10 1>;
 179                 };
 180                 wifi3 {
 181                         label = "wifi3";
 182                         gpios = <&gpio 6 1>;
 183                 };
 184                 voice {
 185                         label = "voice";
 186                         gpios = <&gpio 31 1>;
 187                 };
 188                 wps {
 189                         label = "wps";
 190                         gpios = <&gpio 15 1>;
 191                 };
 192                 wps2 {
 193                         label = "wps2";
 194                         gpios = <&gpio 7 1>;
 195                 };
 196                 wps3 {
 197                         label = "wps3";
 198                         gpios = <&gpio 23 1>;
 199                 };
 200                 dsl: dsl {
 201                         label = "dsl";
 202                         gpios = <&gpio 4 1>;
 203                 };
 204                 lan {
 205                         label = "lan";
 206                         gpios = <&gpio 1 1>;
 207                 };
 208                 tv {
 209                         label = "tv";
 210                         gpios = <&gpio 20 1>;
 211                 };
 212                 upgrade {
 213                         label = "upgrade";
 214                         gpios = <&gpio 29 1>;
 215                 };
 216         };
 217
 218         /* is there another way to "reserve" the GPIO? */
 219         gpio_export {
 220                 compatible = "gpio-export";
 221                 #size-cells = <0>;
 222
 223                 switch {
 224                         gpio-export,name = "switch";
 225                         gpio-export,output = <1>;
 226                         gpios = <&gpio 19 0>;
 227                 };
 228         };
 229 };