e2d386088fe3d4eff0eeb30aec24e04a49a9e244
[openwrt.git] / target / linux / lantiq / dts / ARV4525PW.dts
1 /dts-v1/;
2
3 /include/ "danube.dtsi"
4
5 / {
6         model = "ARV4525PW - Speedport W501V Typ A";
7
8         memory@0 {
9                 reg = <0x0 0x2000000>;
10         };
11
12         sram@1F000000 {
13                 vmmc@107000 {
14                         status = "okay";
15                         gpios = <&gpio 31 0>;
16                 };
17         };
18
19         fpi@10000000 {
20                 localbus@0 {
21                         nor-boot@0 {
22                                 compatible = "lantiq,nor";
23                                 bank-width = <2>;
24                                 reg = <0 0x0 0x2000000>;
25                                 #address-cells = <1>;
26                                 #size-cells = <1>;
27
28                                 partition@0 {
29                                         label = "uboot";
30                                         reg = <0x00000 0x10000>;
31                                         read-only;
32                                 };
33
34                                 partition@10000 {
35                                         label = "uboot_env";
36                                         reg = <0x10000 0x10000>;
37                                         read-only;
38                                 };
39
40                                 partition@20000 {
41                                         label = "linux";
42                                         reg = <0x20000 0x3d0000>;
43                                 };
44
45                                 partition@400000 {
46                                         label = "boardconfig";
47                                         reg = <0x3f0000 0x10000>;
48                                         read-only;
49                                 };
50                         };
51
52                         mac_addr {
53                                 compatible = "lantiq,eth-mac";
54                                 reg = <0 0x3f0016 0x6>;
55                                 mac-increment = <2>;
56                         };
57
58                         ath5k_eep {
59                                 compatible = "ath5k,eeprom";
60                                 reg = <0 0x3f0400 0x800>;
61                                 ath,mac-offset = <0>;
62                                 ath,eep-swap;
63                         };
64                 };
65
66                 gpio: pinmux@E100B10 {
67                         pinctrl-names = "default";
68                         pinctrl-0 = <&state_default>;
69
70                         state_default: pinmux {
71                                 pci_in {
72                                         lantiq,groups = "req1";
73                                         lantiq,function = "pci";
74                                         lantiq,open-drain = <1>;
75                                         lantiq,pull = <2>;
76                                         lantiq,output = <0>;
77                                 };
78                                 pci_out {
79                                         lantiq,groups = "gnt1";
80                                         lantiq,function = "pci";
81                                         lantiq,output = <1>;
82                                 };
83                                 pci_rst {
84                                         lantiq,pins = "io21";
85                                         lantiq,pull = <2>;
86                                         lantiq,output = <1>;
87                                 };
88                                 relay {
89                                         lantiq,pins = "io31";
90                                         lantiq,output = <1>;
91                                 };
92                         };
93                 };
94
95                 etop@E180000 {
96                         phy-mode = "mii";
97                 };
98
99                 pci@E105400 {
100                         status = "okay";
101                         gpio-reset = <&gpio 21 0>;
102                 };
103
104         };
105
106 /*
107 #define ARV4525PW_PHYRESET      13
108 #define ARV4525PW_RELAY         31
109 */
110
111         gpio-keys-polled {
112                 compatible = "gpio-keys-polled";
113                 #address-cells = <1>;
114                 #size-cells = <0>;
115                 poll-interval = <100>;
116
117                 wps {
118                         label = "wps";
119                         gpios = <&gpio 29 1>;
120                         linux,code = <0x211>;
121                 };
122                 reset {
123                         label = "reset";
124                         gpios = <&gpio 30 1>;
125                         linux,code = <0x198>;
126                 };
127         };
128
129         gpio-leds {
130                 compatible = "gpio-leds";
131                 fxo {
132                         label = "fxo";
133                         gpios = <&gpio 4 1>;
134                 };
135                 fxs {
136                         label = "fxs";
137                         gpios = <&gpio 5 1>;
138                 };
139                 dsl {
140                         label = "dsl";
141                         gpios = <&gpio 6 1>;
142                 };
143                 wifi {
144                         label = "wifi";
145                         gpios = <&gpio 8 1>;
146                 };
147                 online {
148                         /*label = "online"; - we dont have a power led, lets use this one */
149                         label = "power";
150                         gpios = <&gpio 9 1>;
151                 };
152         };
153 };