target/linux/lantiq/dts/ARV4525PW.dts

   1 /dts-v1/;
   2
   3 /include/ "danube.dtsi"
   4
   5 / {
   6         model = "ARV4525PW - Speedport W501V Typ A";
   7
   8         chosen {
   9                 leds {
  10                         dsl = &dsl;
  11                         internet = &online;
  12                         /* we dont have a power led, lets use the online led */
  13                         power = &online;
  14                         wifi = &wifi;
  15                 };
  16         };
  17
  18         memory@0 {
  19                 reg = <0x0 0x2000000>;
  20         };
  21
  22         sram@1F000000 {
  23                 vmmc@107000 {
  24                         status = "okay";
  25                         gpios = <&gpio 31 0>;
  26                 };
  27         };
  28
  29         fpi@10000000 {
  30                 localbus@0 {
  31                         nor-boot@0 {
  32                                 compatible = "lantiq,nor";
  33                                 bank-width = <2>;
  34                                 reg = <0 0x0 0x2000000>;
  35                                 #address-cells = <1>;
  36                                 #size-cells = <1>;
  37
  38                                 partition@0 {
  39                                         label = "uboot";
  40                                         reg = <0x00000 0x10000>;
  41                                         read-only;
  42                                 };
  43
  44                                 partition@10000 {
  45                                         label = "uboot_env";
  46                                         reg = <0x10000 0x10000>;
  47                                         read-only;
  48                                 };
  49
  50                                 partition@20000 {
  51                                         label = "firmware";
  52                                         reg = <0x20000 0x3d0000>;
  53                                 };
  54
  55                                 partition@400000 {
  56                                         label = "boardconfig";
  57                                         reg = <0x3f0000 0x10000>;
  58                                         read-only;
  59                                 };
  60                         };
  61
  62                         mac_addr {
  63                                 compatible = "lantiq,eth-mac";
  64                                 reg = <0 0x3f0016 0x6>;
  65                                 mac-increment = <2>;
  66                         };
  67
  68                         ath5k_eep {
  69                                 compatible = "ath5k,eeprom";
  70                                 reg = <0 0x3f0400 0x1000>;
  71                                 ath,mac-offset = <0>;
  72                                 ath,eep-swap;
  73                         };
  74                 };
  75
  76                 gpio: pinmux@E100B10 {
  77                         pinctrl-names = "default";
  78                         pinctrl-0 = <&state_default>;
  79
  80                         state_default: pinmux {
  81                                 pci_in {
  82                                         lantiq,groups = "req1";
  83                                         lantiq,function = "pci";
  84                                         lantiq,open-drain = <1>;
  85                                         lantiq,pull = <2>;
  86                                         lantiq,output = <0>;
  87                                 };
  88                                 pci_out {
  89                                         lantiq,groups = "gnt1";
  90                                         lantiq,function = "pci";
  91                                         lantiq,output = <1>;
  92                                 };
  93                                 pci_rst {
  94                                         lantiq,pins = "io21";
  95                                         lantiq,pull = <2>;
  96                                         lantiq,output = <1>;
  97                                 };
  98                                 relay {
  99                                         lantiq,pins = "io31";
 100                                         lantiq,output = <1>;
 101                                 };
 102                         };
 103                 };
 104
 105                 etop@E180000 {
 106                         phy-mode = "mii";
 107                 };
 108
 109                 pci@E105400 {
 110                         status = "okay";
 111                         gpio-reset = <&gpio 21 0>;
 112                 };
 113
 114         };
 115
 116 /*
 117 #define ARV4525PW_PHYRESET      13
 118 #define ARV4525PW_RELAY         31
 119 */
 120
 121         gpio-keys-polled {
 122                 compatible = "gpio-keys-polled";
 123                 #address-cells = <1>;
 124                 #size-cells = <0>;
 125                 poll-interval = <100>;
 126
 127                 wps {
 128                         label = "wps";
 129                         gpios = <&gpio 29 1>;
 130                         linux,code = <0x211>;
 131                 };
 132                 reset {
 133                         label = "reset";
 134                         gpios = <&gpio 30 1>;
 135                         linux,code = <0x198>;
 136                 };
 137         };
 138
 139         gpio-leds {
 140                 compatible = "gpio-leds";
 141                 fxo {
 142                         label = "fxo";
 143                         gpios = <&gpio 4 1>;
 144                 };
 145                 fxs {
 146                         label = "fxs";
 147                         gpios = <&gpio 5 1>;
 148                 };
 149                 dsl: dsl {
 150                         label = "dsl";
 151                         gpios = <&gpio 6 1>;
 152                 };
 153                 wifi: wifi {
 154                         label = "wifi";
 155                         gpios = <&gpio 8 1>;
 156                 };
 157                 online: online {
 158                         /*label = "online"; - we dont have a power led, lets use this one */
 159                         label = "power";
 160                         gpios = <&gpio 9 1>;
 161                 };
 162         };
 163 };