target/linux/kirkwood/patches-4.4/190-nsa310s.patch

   1 --- /dev/null
   2 +++ b/arch/arm/boot/dts/kirkwood-nsa310s.dts
   3 @@ -0,0 +1,287 @@
   4 +/dts-v1/;
   5 +
   6 +#include "kirkwood.dtsi"
   7 +#include "kirkwood-6281.dtsi"
   8 +
   9 +/ {
  10 +       model = "ZyXEL NSA310S";
  11 +       compatible = "zyxel,nsa320s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
  12 +
  13 +       memory {
  14 +               device_type = "memory";
  15 +               reg = <0x00000000 0x10000000>;
  16 +       };
  17 +
  18 +       chosen {
  19 +               bootargs = "console=ttyS0,115200n8 earlyprintk";
  20 +               stdout-path = &uart0;
  21 +       };
  22 +
  23 +       mbus {
  24 +               pcie-controller {
  25 +                       status = "okay";
  26 +
  27 +                       pcie@1,0 {
  28 +                               status = "okay";
  29 +                       };
  30 +               };
  31 +       };
  32 +
  33 +       ocp@f1000000 {
  34 +               pinctrl: pin-controller@10000 {
  35 +                       pinctrl-names = "default";
  36 +
  37 +                       pmx_sata0: pmx-sata0 {
  38 +                               marvell,pins;
  39 +                               marvell,function = "sata0";
  40 +                       };
  41 +                       pmx_sata1: pmx-sata1 {
  42 +                               marvell,pins;
  43 +                               marvell,function = "sata1";
  44 +                       };
  45 +                       pmx_usb_power: pmx-usb-power {
  46 +                               marvell,pins = "mpp21";
  47 +                               marvell,function = "gpio";
  48 +                       };
  49 +                       pmx_pwr_off: pmx-pwr-off {
  50 +                               marvell,pins = "mpp27";
  51 +                               marvell,function = "gpio";
  52 +                       };
  53 +                       pmx_btn_reset: pmx-btn-reset {
  54 +                               marvell,pins = "mpp24";
  55 +                               marvell,function = "gpio";
  56 +                       };
  57 +                       pmx_btn_copy: pmx-btn-copy {
  58 +                               marvell,pins = "mpp25";
  59 +                               marvell,function = "gpio";
  60 +                       };
  61 +                       pmx_btn_power: pmx-btn-power {
  62 +                               marvell,pins = "mpp26";
  63 +                               marvell,function = "gpio";
  64 +                       };
  65 +                       pmx_led_hdd2_green: pmx-led-hdd2-green {
  66 +                               marvell,pins = "mpp34";
  67 +                               marvell,function = "gpio";
  68 +                       };
  69 +                       pmx_led_hdd2_red: pmx-led-hdd2-red {
  70 +                               marvell,pins = "mpp12";
  71 +                               marvell,function = "gpio";
  72 +                       };
  73 +                       pmx_led_usb_green: pmx-led-usb-green {
  74 +                               marvell,pins = "mpp15";
  75 +                               marvell,function = "gpio";
  76 +                       };
  77 +                       pmx_led_copy_green: pmx-led-copy-green {
  78 +                               marvell,pins = "mpp22";
  79 +                               marvell,function = "gpio";
  80 +                       };
  81 +                       pmx_led_copy_red: pmx-led-copy-red {
  82 +                               marvell,pins = "mpp23";
  83 +                               marvell,function = "gpio";
  84 +                       };
  85 +                       pmx_led_sys_green: pmx-led-sys-green {
  86 +                               marvell,pins = "mpp28";
  87 +                               marvell,function = "gpio";
  88 +                       };
  89 +                       pmx_led_sys_orange: pmx-led-sys-orange {
  90 +                               marvell,pins = "mpp29";
  91 +                               marvell,function = "gpio";
  92 +                       };
  93 +                       pmx_led_hdd1_green: pmx-led-hdd1-green {
  94 +                               marvell,pins = "mpp16";
  95 +                               marvell,function = "gpio";
  96 +                       };
  97 +                       pmx_led_hdd1_red: pmx-led-hdd1-red {
  98 +                               marvell,pins = "mpp13";
  99 +                               marvell,function = "gpio";
 100 +                       };
 101 +                       pmx_pwr_sata1: pmx-pwr-sata1 {
 102 +                               marvell,pins = "mpp33";
 103 +                               marvell,function = "gpio";
 104 +                       };
 105 +               };
 106 +
 107 +               serial@12000 {
 108 +                       status = "okay";
 109 +               };
 110 +
 111 +               sata@80000 {
 112 +                       status = "okay";
 113 +                       nr-ports = <2>;
 114 +               };
 115 +
 116 +               rtc@10300 {
 117 +                       status = "disabled";
 118 +               };
 119 +
 120 +               i2c@11000 {
 121 +                       status = "okay";
 122 +                       ht1382: rtc@68 {
 123 +                               compatible = "htk,ht1382";
 124 +                               reg = <0x68>;
 125 +                       };
 126 +               };
 127 +       };
 128 +
 129 +       regulators {
 130 +               compatible = "simple-bus";
 131 +               #address-cells = <1>;
 132 +               #size-cells = <0>;
 133 +               pinctrl-names = "default";
 134 +               pinctrl-0 = <&pmx_usb_power &pmx_pwr_sata1>;
 135 +
 136 +               usb0_power: regulator@1 {
 137 +                       compatible = "regulator-fixed";
 138 +                       reg = <1>;
 139 +                       regulator-name = "USB Power";
 140 +                       regulator-min-microvolt = <5000000>;
 141 +                       regulator-max-microvolt = <5000000>;
 142 +                       regulator-always-on;
 143 +                       regulator-boot-on;
 144 +                       enable-active-high;
 145 +                       gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
 146 +               };
 147 +
 148 +               sata1_power: regulator@2 {
 149 +                       compatible = "regulator-fixed";
 150 +                       reg = <2>;
 151 +                       regulator-name = "SATA1 Power";
 152 +                       regulator-min-microvolt = <5000000>;
 153 +                       regulator-max-microvolt = <5000000>;
 154 +                       regulator-always-on;
 155 +                       regulator-boot-on;
 156 +                       enable-active-high;
 157 +                       gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
 158 +               };
 159 +       };
 160 +
 161 +
 162 +       gpio_keys {
 163 +               compatible = "gpio-keys";
 164 +               #address-cells = <1>;
 165 +               #size-cells = <0>;
 166 +               pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
 167 +               pinctrl-names = "default";
 168 +
 169 +               button@1 {
 170 +                       label = "Power Button";
 171 +                       linux,code = <KEY_POWER>;
 172 +                       gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
 173 +               };
 174 +               button@2 {
 175 +                       label = "Copy Button";
 176 +                       linux,code = <KEY_COPY>;
 177 +                       gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
 178 +               };
 179 +               button@3 {
 180 +                       label = "Reset Button";
 181 +                       linux,code = <KEY_RESTART>;
 182 +                       gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
 183 +               };
 184 +       };
 185 +
 186 +       gpio-leds {
 187 +               compatible = "gpio-leds";
 188 +               pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
 189 +                               &pmx_led_usb_green
 190 +                               &pmx_led_sys_green &pmx_led_sys_orange
 191 +                               &pmx_led_copy_green &pmx_led_copy_red
 192 +                               &pmx_led_hdd1_green &pmx_led_hdd1_red>;
 193 +               pinctrl-names = "default";
 194 +
 195 +               green-sys {
 196 +                       label = "nsa310s:green:sys";
 197 +                       gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
 198 +                       linux,default-trigger = "timer";
 199 +               };
 200 +               orange-sys {
 201 +                       label = "nsa310s:orange:sys";
 202 +                       gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 203 +               };
 204 +               green-hdd1 {
 205 +                       label = "nsa310s:green:hdd1";
 206 +                       gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 207 +               };
 208 +               red-hdd1 {
 209 +                       label = "nsa310s:red:hdd1";
 210 +                       gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 211 +               };
 212 +               green-hdd2 {
 213 +                       label = "nsa310s:green:hdd2";
 214 +                       gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 215 +               };
 216 +               red-hdd2 {
 217 +                       label = "nsa310s:red:hdd2";
 218 +                       gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 219 +               };
 220 +               green-usb {
 221 +                       label = "nsa310s:green:usb";
 222 +                       gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 223 +               };
 224 +               green-copy {
 225 +                       label = "nsa310s:green:copy";
 226 +                       gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
 227 +                       linux,default-trigger = "ide-disk";
 228 +               };
 229 +               red-copy {
 230 +                       label = "nsa310s:red:copy";
 231 +                       gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
 232 +               };
 233 +       };
 234 +
 235 +       gpio_poweroff {
 236 +               compatible = "gpio-poweroff";
 237 +               pinctrl-0 = <&pmx_pwr_off>;
 238 +               pinctrl-names = "default";
 239 +               gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
 240 +       };
 241 +};
 242 +
 243 +&nand {
 244 +       status = "okay";
 245 +       chip-delay = <35>;
 246 +
 247 +       partition@0 {
 248 +               label = "u-boot";
 249 +               reg = <0x0000000 0xe0000>;
 250 +       };
 251 +
 252 +       partition@e0000 {
 253 +               label = "u-boot environment";
 254 +               reg = <0xe0000 0x100000>;
 255 +       };
 256 +
 257 +       partition@100000 {
 258 +               label = "second stage u-boot";
 259 +               reg = <0x100000 0x200000>;
 260 +       };
 261 +
 262 +       partition@200000 {
 263 +               label = "root";
 264 +               reg = <0x200000 0x7e00000>;
 265 +       };
 266 +};
 267 +
 268 +&mdio {
 269 +       status = "okay";
 270 +       ethphy0: ethernet-phy@1 {
 271 +               compatible = "marvell,88e1318s";
 272 +               reg = <1>;
 273 +               marvell,reg-init = <0x1 0x16 0x0 0x3>,
 274 +                                                       <0x1 0x10 0x0 0x1017>,
 275 +                                                       <0x1 0x11 0x0 0x4408>,
 276 +                                                       <0x1 0x16 0x0 0x0>,
 277 +                                                       <0x1 0x4 0x0 0x1e1>,
 278 +                                                       <0x1 0x9 0x0 0x300>,
 279 +                                                       <0x1 0x10 0x0 0x3860>,
 280 +                                                       <0x1 0x0 0x0 0x9140>;
 281 +       };
 282 +};
 283 +
 284 +&eth0 {
 285 +       status = "okay";
 286 +
 287 +       ethernet0-port@0 {
 288 +               phy-handle = <&ethphy0>;
 289 +       };
 290 +};
 291 --- a/arch/arm/boot/dts/Makefile
 292 +++ b/arch/arm/boot/dts/Makefile
 293 @@ -203,6 +203,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
 294         kirkwood-ns2mini.dtb \
 295         kirkwood-nsa310.dtb \
 296         kirkwood-nsa310a.dtb \
 297 +       kirkwood-nsa310s.dtb \
 298         kirkwood-openblocks_a6.dtb \
 299         kirkwood-openblocks_a7.dtb \
 300         kirkwood-openrd-base.dtb \