target/linux/kirkwood/patches-3.18/160-ea4500.patch

   1 --- a/arch/arm/boot/dts/Makefile
   2 +++ b/arch/arm/boot/dts/Makefile
   3 @@ -128,6 +128,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-
   4         kirkwood-is2.dtb \
   5         kirkwood-km_kirkwood.dtb \
   6         kirkwood-laplug.dtb \
   7 +       kirkwood-linksys-viper.dtb \
   8         kirkwood-lschlv2.dtb \
   9         kirkwood-lsxhl.dtb \
  10         kirkwood-mplcec4.dtb \
  11 --- /dev/null
  12 +++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
  13 @@ -0,0 +1,187 @@
  14 +/*
  15 + * kirkwood-linksys-viper.dts - Device Tree file for Linksys E4200v2/EA4500
  16 + *
  17 + * (c) 2013 Jonas Gorski <jogo@openwrt.org>
  18 + * (c) 2013 Deutsche Telekom Innovation Laboratories
  19 + * (c) 2014 Luka Perkov <luka@openwrt.org>
  20 + *
  21 + * This file is licensed under the terms of the GNU General Public
  22 + * License version 2.  This program is licensed "as is" without any
  23 + * warranty of any kind, whether express or implied.
  24 + */
  25 +
  26 +/dts-v1/;
  27 +
  28 +#include "kirkwood.dtsi"
  29 +#include "kirkwood-6282.dtsi"
  30 +
  31 +/ {
  32 +       model = "Linksys E4200v2 / EA4500";
  33 +       compatible = "linksys,viper", "marvell,kirkwood-88f6282", "marvell,kirkwood";
  34 +
  35 +       memory {
  36 +               device_type = "memory";
  37 +               reg = <0x00000000 0x8000000>;
  38 +       };
  39 +
  40 +       chosen {
  41 +               bootargs = "console=ttyS0,115200n8 earlyprintk";
  42 +       };
  43 +
  44 +       mbus {
  45 +               pcie-controller {
  46 +                       status = "okay";
  47 +
  48 +                       pcie@1,0 {
  49 +                               status = "okay";
  50 +                       };
  51 +
  52 +                       pcie@2,0 {
  53 +                               status = "okay";
  54 +                       };
  55 +               };
  56 +       };
  57 +
  58 +       ocp@f1000000 {
  59 +               pinctrl: pin-controller@10000 {
  60 +                       pmx_led_white_health: pmx-led-white-health {
  61 +                               marvell,pins = "mpp7";
  62 +                               marvell,function = "gpo";
  63 +                       };
  64 +                       pmx_led_white_pulse: pmx-led-white-pulse {
  65 +                               marvell,pins = "mpp14";
  66 +                               marvell,function = "gpio";
  67 +                       };
  68 +                       pmx_btn_wps: pmx-btn-wps {
  69 +                               marvell,pins = "mpp47";
  70 +                               marvell,function = "gpio";
  71 +                       };
  72 +                       pmx_btn_reset: pmx-btn-reset {
  73 +                               marvell,pins = "mpp48";
  74 +                               marvell,function = "gpio";
  75 +                       };
  76 +               };
  77 +
  78 +               rtc@10300 {
  79 +                       status = "disabled";
  80 +               };
  81 +
  82 +               serial@12000 {
  83 +                       status = "okay";
  84 +               };
  85 +
  86 +       };
  87 +
  88 +       gpio_keys {
  89 +               compatible = "gpio-keys";
  90 +               #address-cells = <1>;
  91 +               #size-cells = <0>;
  92 +               pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
  93 +               pinctrl-names = "default";
  94 +
  95 +               button@15 {
  96 +                       label = "WPS Button";
  97 +                       linux,code = <KEY_WPS_BUTTON>;
  98 +                       gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  99 +               };
 100 +
 101 +               button@16 {
 102 +                       label = "Reset Button";
 103 +                       linux,code = <KEY_RESTART>;
 104 +                       gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 105 +               };
 106 +       };
 107 +
 108 +       gpio-leds {
 109 +               compatible = "gpio-leds";
 110 +               pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
 111 +               pinctrl-names = "default";
 112 +
 113 +               white-health {
 114 +                       label = "viper:white:health";
 115 +                       gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
 116 +               };
 117 +
 118 +               white-pulse {
 119 +                       label = "viper:white:pulse";
 120 +                       gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
 121 +               };
 122 +       };
 123 +
 124 +       mvsw61xx {
 125 +               compatible = "marvell,88e6171";
 126 +               status = "okay";
 127 +               reg = <0x10>;
 128 +
 129 +               mii-bus = <&mdio>;
 130 +               cpu-port-0 = <5>;
 131 +               cpu-port-1 = <6>;
 132 +               is-indirect;
 133 +       };
 134 +};
 135 +
 136 +&nand {
 137 +       status = "okay";
 138 +       pinctrl-0 = <&pmx_nand>;
 139 +       pinctrl-names = "default";
 140 +
 141 +       partition@0 {
 142 +               label = "u-boot";
 143 +               reg = <0x0 0x80000>;
 144 +       };
 145 +
 146 +       partition@80000 {
 147 +               label = "u_env";
 148 +               reg = <0x80000 0x20000>;
 149 +       };
 150 +
 151 +       partition@a0000 {
 152 +               label = "s_env";
 153 +               reg = <0xa0000 0x20000>;
 154 +       };
 155 +
 156 +       partition@200000 {
 157 +               label = "kernel1";
 158 +               reg = <0x200000 0x1a00000>;
 159 +       };
 160 +
 161 +       partition@4a0000 {
 162 +               label = "rootfs1";
 163 +               reg = <0x4a0000 0x1760000>;
 164 +       };
 165 +
 166 +       partition@1c00000 {
 167 +               label = "kernel2";
 168 +               reg = <0x1c00000 0x1a00000>;
 169 +       };
 170 +
 171 +       partition@1ea0000 {
 172 +               label = "rootfs2";
 173 +               reg = <0x1ea0000 0x1760000>;
 174 +       };
 175 +
 176 +       partition@3600000 {
 177 +               label = "syscfg";
 178 +               reg = <0x3600000 0x4a00000>;
 179 +       };
 180 +};
 181 +
 182 +&mdio {
 183 +       status = "okay";
 184 +};
 185 +
 186 +&eth0 {
 187 +       status = "okay";
 188 +       ethernet0-port@0 {
 189 +               speed = <1000>;
 190 +               duplex = <1>;
 191 +       };
 192 +};
 193 +
 194 +&eth1 {
 195 +       status = "okay";
 196 +       ethernet1-port@0 {
 197 +               speed = <1000>;
 198 +               duplex = <1>;
 199 +       };
 200 +};