target/linux/ipq806x/patches-4.0/126-add-rpm-to-ipq8064-dts.patch

   1 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
   2 +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
   3 @@ -2,6 +2,7 @@
   4
   5  #include "skeleton.dtsi"
   6  #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
   7 +#include <dt-bindings/mfd/qcom-rpm.h>
   8  #include <dt-bindings/soc/qcom,gsbi.h>
   9  #include <dt-bindings/reset/qcom,gcc-ipq806x.h>
  10  #include <include/dt-bindings/interrupt-controller/arm-gic.h>
  11 @@ -76,6 +77,63 @@
  12                 ranges;
  13                 compatible = "simple-bus";
  14
  15 +               rpm@108000 {
  16 +                       compatible = "qcom,rpm-ipq8064";
  17 +                       reg = <0x108000 0x1000>;
  18 +                       qcom,ipc = <&l2cc 0x8 2>;
  19 +
  20 +                       interrupts = <0 19 0>,
  21 +                                    <0 21 0>,
  22 +                                    <0 22 0>;
  23 +                       interrupt-names = "ack",
  24 +                                         "err",
  25 +                                         "wakeup";
  26 +
  27 +                       #address-cells = <1>;
  28 +                       #size-cells = <0>;
  29 +
  30 +                       smb208_s1a: smb208-s1a {
  31 +                               compatible = "qcom,rpm-smb208";
  32 +                               reg = <QCOM_RPM_SMB208_S1a>;
  33 +
  34 +                               regulator-min-microvolt = <1050000>;
  35 +                               regulator-max-microvolt = <1150000>;
  36 +
  37 +                               qcom,switch-mode-frequency = <1200000>;
  38 +
  39 +                       };
  40 +
  41 +                       smb208_s1b: smb208-s1b {
  42 +                               compatible = "qcom,rpm-smb208";
  43 +                               reg = <QCOM_RPM_SMB208_S1b>;
  44 +
  45 +                               regulator-min-microvolt = <1050000>;
  46 +                               regulator-max-microvolt = <1150000>;
  47 +
  48 +                               qcom,switch-mode-frequency = <1200000>;
  49 +                       };
  50 +
  51 +                       smb208_s2a: smb208-s2a {
  52 +                               compatible = "qcom,rpm-smb208";
  53 +                               reg = <QCOM_RPM_SMB208_S2a>;
  54 +
  55 +                               regulator-min-microvolt = < 800000>;
  56 +                               regulator-max-microvolt = <1250000>;
  57 +
  58 +                               qcom,switch-mode-frequency = <1200000>;
  59 +                       };
  60 +
  61 +                       smb208_s2b: smb208-s2b {
  62 +                               compatible = "qcom,rpm-smb208";
  63 +                               reg = <QCOM_RPM_SMB208_S2b>;
  64 +
  65 +                               regulator-min-microvolt = < 800000>;
  66 +                               regulator-max-microvolt = <1250000>;
  67 +
  68 +                               qcom,switch-mode-frequency = <1200000>;
  69 +                       };
  70 +               };
  71 +
  72                 qcom_pinmux: pinmux@800000 {
  73                         compatible = "qcom,ipq8064-pinctrl";
  74                         reg = <0x800000 0x4000>;
  75 @@ -120,6 +178,12 @@
  76                         reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
  77                 };
  78
  79 +               l2cc: clock-controller@2011000 {
  80 +                       compatible = "qcom,kpss-gcc", "syscon";
  81 +                       reg = <0x2011000 0x1000>;
  82 +                       clock-output-names = "acpu_l2_aux";
  83 +               };
  84 +
  85                 saw0: regulator@2089000 {
  86                         compatible = "qcom,saw2";
  87                         reg = <0x02089000 0x1000>, <0x02009000 0x1000>;