2 * Copyright 2013 Gateworks Corporation
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
13 #include "imx6dl.dtsi"
16 model = "Gateworks Ventana i.MX6 DualLite GW52XX";
17 compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl";
19 /* these are used by bootloader for disabling nodes */
37 reg = <0x10000000 0x20000000>;
41 compatible = "gpio-leds";
45 gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
47 linux,default-trigger = "heartbeat";
52 gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
53 default-state = "off";
58 gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */
59 default-state = "off";
64 compatible = "simple-bus";
67 compatible = "regulator-fixed";
68 regulator-name = "1P0V";
69 regulator-min-microvolt = <1000000>;
70 regulator-max-microvolt = <1000000>;
74 /* remove this fixed regulator once ltc3676__sw2 driver available */
76 compatible = "regulator-fixed";
77 regulator-name = "1P8V";
78 regulator-min-microvolt = <1800000>;
79 regulator-max-microvolt = <1800000>;
84 compatible = "regulator-fixed";
85 regulator-name = "3P3V";
86 regulator-min-microvolt = <3300000>;
87 regulator-max-microvolt = <3300000>;
92 compatible = "regulator-fixed";
93 regulator-name = "5P0V";
94 regulator-min-microvolt = <5000000>;
95 regulator-max-microvolt = <5000000>;
99 reg_usb_otg_vbus: usb_otg_vbus {
100 compatible = "regulator-fixed";
101 regulator-name = "usb_otg_vbus";
102 regulator-min-microvolt = <5000000>;
103 regulator-max-microvolt = <5000000>;
104 gpio = <&gpio3 22 0>;
110 compatible = "fsl,imx6q-sabrelite-sgtl5000",
111 "fsl,imx-audio-sgtl5000";
112 model = "imx6q-sabrelite-sgtl5000";
113 ssi-controller = <&ssi1>;
114 audio-codec = <&codec>;
116 "MIC_IN", "Mic Jack",
117 "Mic Jack", "Mic Bias",
118 "Headphone Jack", "HP_OUT";
125 pinctrl-names = "default";
126 pinctrl-0 = <&pinctrl_audmux_1>;
131 pinctrl-names = "default";
132 pinctrl-0 = <&pinctrl_flexcan1_1>;
137 pinctrl-names = "default";
138 pinctrl-0 = <&pinctrl_enet_1>;
140 phy-reset-gpios = <&gpio1 30 0>;
145 pinctrl-names = "default";
146 pinctrl-0 = <&pinctrl_gpmi_nand_2>;
151 clock-frequency = <100000>;
152 pinctrl-names = "default";
153 pinctrl-0 = <&pinctrl_i2c1_1>;
157 compatible = "atmel,24c02";
163 compatible = "atmel,24c02";
169 compatible = "atmel,24c02";
175 compatible = "atmel,24c02";
181 compatible = "nxp,pca9555";
188 compatible = "gw,gsp";
193 compatible = "dallas,ds1672";
199 clock-frequency = <100000>;
200 pinctrl-names = "default";
201 pinctrl-0 = <&pinctrl_i2c2_2>;
204 pciswitch: pex8609@3f {
205 compatible = "plx,pex8609";
210 compatible = "ltc,ltc3676";
214 sw1_reg: ltc3676__sw1 {
215 regulator-min-microvolt = <1175000>;
216 regulator-max-microvolt = <1175000>;
221 sw2_reg: ltc3676__sw2 {
222 regulator-min-microvolt = <1800000>;
223 regulator-max-microvolt = <1800000>;
228 sw3_reg: ltc3676__sw3 {
229 regulator-min-microvolt = <1175000>;
230 regulator-max-microvolt = <1175000>;
235 sw4_reg: ltc3676__sw4 {
236 regulator-min-microvolt = <1500000>;
237 regulator-max-microvolt = <1500000>;
242 ldo2_reg: ltc3676__ldo2 {
243 regulator-min-microvolt = <2500000>;
244 regulator-max-microvolt = <2500000>;
249 ldo3_reg: ltc3676__ldo3 {
250 regulator-min-microvolt = <1800000>;
251 regulator-max-microvolt = <1800000>;
256 ldo4_reg: ltc3676__ldo4 {
257 regulator-min-microvolt = <3000000>;
258 regulator-max-microvolt = <3000000>;
265 clock-frequency = <100000>;
266 pinctrl-names = "default";
267 pinctrl-0 = <&pinctrl_i2c3_2>;
270 accelerometer: fxos8700@1e {
271 compatible = "fsl,fxos8700";
276 compatible = "fsl,sgtl5000";
278 clocks = <&clks 169>;
279 VDDA-supply = <®_1p8v>;
280 VDDIO-supply = <®_3p3v>;
283 touchscreen: egalax_ts@04 {
284 compatible = "eeti,egalax_ts";
286 interrupt-parent = <&gpio7>;
287 interrupts = <12 2>; /* gpio7_12 active low */
288 wakeup-gpios = <&gpio7 12 0>;
291 videoin: adv7180@20 {
292 compatible = "adi,adv7180";
298 pinctrl-names = "default";
299 pinctrl-0 = <&pinctrl_hog>;
302 pinctrl_hog: hoggrp {
304 MX6DL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */
305 MX6DL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */
306 MX6DL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
307 MX6DL_PAD_EIM_D31__GPIO3_IO31 0x80000000 /* VIDDEC_PDN# */
308 MX6DL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
309 MX6DL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */
310 MX6DL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */
311 MX6DL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
312 MX6DL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
313 MX6DL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USB_SEL_PCI */
314 MX6DL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
315 MX6DL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
316 MX6DL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
317 MX6DL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
318 MX6DL_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* LVDS_TCH# */
319 MX6DL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_CD# */
320 MX6DL_PAD_SD4_DAT3__GPIO2_IO11 0x80000000 /* UART2_EN# */
329 crtcs = <&ipu1 0>, <&ipu1 1>;
334 reset-gpio = <&gpio1 29 0>;
339 fsl,mode = "i2s-slave";
344 pinctrl-names = "default";
345 pinctrl-0 = <&pinctrl_uart1_2>;
350 pinctrl-names = "default";
351 pinctrl-0 = <&pinctrl_uart2_1>;
356 pinctrl-names = "default";
357 pinctrl-0 = <&pinctrl_uart5_1>;
362 vbus-supply = <®_usb_otg_vbus>;
363 pinctrl-names = "default";
364 pinctrl-0 = <&pinctrl_usbotg_1>;
365 disable-over-current;
374 pinctrl-names = "default";
375 pinctrl-0 = <&pinctrl_usdhc3_2>;
376 cd-gpios = <&gpio7 0 0>;
377 vmmc-supply = <®_3p3v>;