kernel: update 3.18 to 3.18.1
[openwrt.git] / target / linux / generic / patches-3.18 / 861-04_spi_gpio_implement_spi_delay.patch
1 Implement the SPI-GPIO delay function for busses that need speed limitation.
2
3 --mb
4
5
6
7 --- a/drivers/spi/spi-gpio.c
8 +++ b/drivers/spi/spi-gpio.c
9 @@ -21,6 +21,7 @@
10  #include <linux/module.h>
11  #include <linux/platform_device.h>
12  #include <linux/gpio.h>
13 +#include <linux/delay.h>
14  #include <linux/of.h>
15  #include <linux/of_device.h>
16  #include <linux/of_gpio.h>
17 @@ -73,6 +74,7 @@ struct spi_gpio {
18   *             #define SPI_MOSI_GPIO   120
19   *             #define SPI_SCK_GPIO    121
20   *             #define SPI_N_CHIPSEL   4
21 + *             #undef NEED_SPIDELAY
22   *             #include "spi-gpio.c"
23   */
24  
25 @@ -80,6 +82,7 @@ struct spi_gpio {
26  #define DRIVER_NAME    "spi_gpio"
27  
28  #define GENERIC_BITBANG        /* vs tight inlines */
29 +#define NEED_SPIDELAY  1
30  
31  /* all functions referencing these symbols must define pdata */
32  #define SPI_MISO_GPIO  ((pdata)->miso)
33 @@ -130,12 +133,20 @@ static inline int getmiso(const struct s
34  #undef pdata
35  
36  /*
37 - * NOTE:  this clocks "as fast as we can".  It "should" be a function of the
38 - * requested device clock.  Software overhead means we usually have trouble
39 - * reaching even one Mbit/sec (except when we can inline bitops), so for now
40 - * we'll just assume we never need additional per-bit slowdowns.
41 + * NOTE:  to clock "as fast as we can", set spi_device.max_speed_hz
42 + * and spi_transfer.speed_hz to 0.
43 + * Otherwise this is a function of the requested device clock.
44 + * Software overhead means we usually have trouble
45 + * reaching even one Mbit/sec (except when we can inline bitops). So on small
46 + * embedded devices with fast SPI slaves you usually don't need a delay.
47   */
48 -#define spidelay(nsecs)        do {} while (0)
49 +static inline void spidelay(unsigned nsecs)
50 +{
51 +#ifdef NEED_SPIDELAY
52 +       if (unlikely(nsecs))
53 +               ndelay(nsecs);
54 +#endif /* NEED_SPIDELAY */
55 +}
56  
57  #include "spi-bitbang-txrx.h"
58