kernel/mac80211: backport bcma changes from 4.1
[openwrt.git] / target / linux / generic / patches-3.14 / 027-bcma-from-4.1.patch
1 --- a/drivers/bcma/bcma_private.h
2 +++ b/drivers/bcma/bcma_private.h
3 @@ -26,6 +26,7 @@ bool bcma_wait_value(struct bcma_device
4                      int timeout);
5  void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core);
6  void bcma_init_bus(struct bcma_bus *bus);
7 +void bcma_unregister_cores(struct bcma_bus *bus);
8  int bcma_bus_register(struct bcma_bus *bus);
9  void bcma_bus_unregister(struct bcma_bus *bus);
10  int __init bcma_bus_early_register(struct bcma_bus *bus);
11 @@ -101,6 +102,11 @@ static inline void __exit bcma_host_soc_
12  
13  /* driver_pci.c */
14  u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address);
15 +void bcma_core_pci_up(struct bcma_drv_pci *pc);
16 +void bcma_core_pci_down(struct bcma_drv_pci *pc);
17 +
18 +/* driver_pcie2.c */
19 +void bcma_core_pcie2_up(struct bcma_drv_pcie2 *pcie2);
20  
21  extern int bcma_chipco_watchdog_register(struct bcma_drv_cc *cc);
22  
23 --- a/drivers/bcma/driver_gpio.c
24 +++ b/drivers/bcma/driver_gpio.c
25 @@ -76,7 +76,7 @@ static void bcma_gpio_free(struct gpio_c
26         bcma_chipco_gpio_pullup(cc, 1 << gpio, 0);
27  }
28  
29 -#if IS_BUILTIN(CONFIG_BCM47XX)
30 +#if IS_BUILTIN(CONFIG_BCM47XX) || IS_BUILTIN(CONFIG_ARCH_BCM_5301X)
31  static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
32  {
33         struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
34 @@ -215,7 +215,7 @@ int bcma_gpio_init(struct bcma_drv_cc *c
35         chip->set               = bcma_gpio_set_value;
36         chip->direction_input   = bcma_gpio_direction_input;
37         chip->direction_output  = bcma_gpio_direction_output;
38 -#if IS_BUILTIN(CONFIG_BCM47XX)
39 +#if IS_BUILTIN(CONFIG_BCM47XX) || IS_BUILTIN(CONFIG_ARCH_BCM_5301X)
40         chip->to_irq            = bcma_gpio_to_irq;
41  #endif
42  #if IS_BUILTIN(CONFIG_OF)
43 --- a/drivers/bcma/driver_pci.c
44 +++ b/drivers/bcma/driver_pci.c
45 @@ -282,21 +282,21 @@ void bcma_core_pci_power_save(struct bcm
46  }
47  EXPORT_SYMBOL_GPL(bcma_core_pci_power_save);
48  
49 -int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
50 +int bcma_core_pci_irq_ctl(struct bcma_bus *bus, struct bcma_device *core,
51                           bool enable)
52  {
53         struct pci_dev *pdev;
54         u32 coremask, tmp;
55         int err = 0;
56  
57 -       if (!pc || core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
58 +       if (bus->hosttype != BCMA_HOSTTYPE_PCI) {
59                 /* This bcma device is not on a PCI host-bus. So the IRQs are
60                  * not routed through the PCI core.
61                  * So we must not enable routing through the PCI core. */
62                 goto out;
63         }
64  
65 -       pdev = pc->core->bus->host_pci;
66 +       pdev = bus->host_pci;
67  
68         err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
69         if (err)
70 @@ -328,28 +328,12 @@ static void bcma_core_pci_extend_L1timer
71         bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG);
72  }
73  
74 -void bcma_core_pci_up(struct bcma_bus *bus)
75 +void bcma_core_pci_up(struct bcma_drv_pci *pc)
76  {
77 -       struct bcma_drv_pci *pc;
78 -
79 -       if (bus->hosttype != BCMA_HOSTTYPE_PCI)
80 -               return;
81 -
82 -       pc = &bus->drv_pci[0];
83 -
84         bcma_core_pci_extend_L1timer(pc, true);
85  }
86 -EXPORT_SYMBOL_GPL(bcma_core_pci_up);
87  
88 -void bcma_core_pci_down(struct bcma_bus *bus)
89 +void bcma_core_pci_down(struct bcma_drv_pci *pc)
90  {
91 -       struct bcma_drv_pci *pc;
92 -
93 -       if (bus->hosttype != BCMA_HOSTTYPE_PCI)
94 -               return;
95 -
96 -       pc = &bus->drv_pci[0];
97 -
98         bcma_core_pci_extend_L1timer(pc, false);
99  }
100 -EXPORT_SYMBOL_GPL(bcma_core_pci_down);
101 --- a/drivers/bcma/driver_pci_host.c
102 +++ b/drivers/bcma/driver_pci_host.c
103 @@ -11,6 +11,7 @@
104  
105  #include "bcma_private.h"
106  #include <linux/pci.h>
107 +#include <linux/slab.h>
108  #include <linux/export.h>
109  #include <linux/bcma/bcma.h>
110  #include <asm/paccess.h>
111 --- a/drivers/bcma/driver_pcie2.c
112 +++ b/drivers/bcma/driver_pcie2.c
113 @@ -10,6 +10,7 @@
114  
115  #include "bcma_private.h"
116  #include <linux/bcma/bcma.h>
117 +#include <linux/pci.h>
118  
119  /**************************************************
120   * R/W ops.
121 @@ -156,14 +157,23 @@ static void pciedev_reg_pm_clk_period(st
122  
123  void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2)
124  {
125 -       struct bcma_chipinfo *ci = &pcie2->core->bus->chipinfo;
126 +       struct bcma_bus *bus = pcie2->core->bus;
127 +       struct bcma_chipinfo *ci = &bus->chipinfo;
128         u32 tmp;
129  
130         tmp = pcie2_read32(pcie2, BCMA_CORE_PCIE2_SPROM(54));
131         if ((tmp & 0xe) >> 1 == 2)
132                 bcma_core_pcie2_cfg_write(pcie2, 0x4e0, 0x17);
133  
134 -       /* TODO: Do we need pcie_reqsize? */
135 +       switch (bus->chipinfo.id) {
136 +       case BCMA_CHIP_ID_BCM4360:
137 +       case BCMA_CHIP_ID_BCM4352:
138 +               pcie2->reqsize = 1024;
139 +               break;
140 +       default:
141 +               pcie2->reqsize = 128;
142 +               break;
143 +       }
144  
145         if (ci->id == BCMA_CHIP_ID_BCM4360 && ci->rev > 3)
146                 bcma_core_pcie2_war_delay_perst_enab(pcie2, true);
147 @@ -173,3 +183,18 @@ void bcma_core_pcie2_init(struct bcma_dr
148         pciedev_crwlpciegen2_180(pcie2);
149         pciedev_crwlpciegen2_182(pcie2);
150  }
151 +
152 +/**************************************************
153 + * Runtime ops.
154 + **************************************************/
155 +
156 +void bcma_core_pcie2_up(struct bcma_drv_pcie2 *pcie2)
157 +{
158 +       struct bcma_bus *bus = pcie2->core->bus;
159 +       struct pci_dev *dev = bus->host_pci;
160 +       int err;
161 +
162 +       err = pcie_set_readrq(dev, pcie2->reqsize);
163 +       if (err)
164 +               bcma_err(bus, "Error setting PCI_EXP_DEVCTL_READRQ: %d\n", err);
165 +}
166 --- a/drivers/bcma/host_pci.c
167 +++ b/drivers/bcma/host_pci.c
168 @@ -213,16 +213,26 @@ static int bcma_host_pci_probe(struct pc
169         /* Initialize struct, detect chip */
170         bcma_init_bus(bus);
171  
172 +       /* Scan bus to find out generation of PCIe core */
173 +       err = bcma_bus_scan(bus);
174 +       if (err)
175 +               goto err_pci_unmap_mmio;
176 +
177 +       if (bcma_find_core(bus, BCMA_CORE_PCIE2))
178 +               bus->host_is_pcie2 = true;
179 +
180         /* Register */
181         err = bcma_bus_register(bus);
182         if (err)
183 -               goto err_pci_unmap_mmio;
184 +               goto err_unregister_cores;
185  
186         pci_set_drvdata(dev, bus);
187  
188  out:
189         return err;
190  
191 +err_unregister_cores:
192 +       bcma_unregister_cores(bus);
193  err_pci_unmap_mmio:
194         pci_iounmap(dev, bus->mmio);
195  err_pci_release_regions:
196 @@ -283,9 +293,12 @@ static const struct pci_device_id bcma_p
197         { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
198         { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) },
199         { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) },
200 +       { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4360) },
201         { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) },
202 +       { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a0) },
203         { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a9) },
204         { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43aa) },
205 +       { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43b1) },
206         { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
207         { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43227) },  /* 0xa8db, BCM43217 (sic!) */
208         { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43228) },  /* 0xa8dc */
209 @@ -310,3 +323,31 @@ void __exit bcma_host_pci_exit(void)
210  {
211         pci_unregister_driver(&bcma_pci_bridge_driver);
212  }
213 +
214 +/**************************************************
215 + * Runtime ops for drivers.
216 + **************************************************/
217 +
218 +/* See also pcicore_up */
219 +void bcma_host_pci_up(struct bcma_bus *bus)
220 +{
221 +       if (bus->hosttype != BCMA_HOSTTYPE_PCI)
222 +               return;
223 +
224 +       if (bus->host_is_pcie2)
225 +               bcma_core_pcie2_up(&bus->drv_pcie2);
226 +       else
227 +               bcma_core_pci_up(&bus->drv_pci[0]);
228 +}
229 +EXPORT_SYMBOL_GPL(bcma_host_pci_up);
230 +
231 +/* See also pcicore_down */
232 +void bcma_host_pci_down(struct bcma_bus *bus)
233 +{
234 +       if (bus->hosttype != BCMA_HOSTTYPE_PCI)
235 +               return;
236 +
237 +       if (!bus->host_is_pcie2)
238 +               bcma_core_pci_down(&bus->drv_pci[0]);
239 +}
240 +EXPORT_SYMBOL_GPL(bcma_host_pci_down);
241 --- a/drivers/bcma/main.c
242 +++ b/drivers/bcma/main.c
243 @@ -363,7 +363,7 @@ static int bcma_register_devices(struct
244         return 0;
245  }
246  
247 -static void bcma_unregister_cores(struct bcma_bus *bus)
248 +void bcma_unregister_cores(struct bcma_bus *bus)
249  {
250         struct bcma_device *core, *tmp;
251  
252 --- a/drivers/net/wireless/b43/main.c
253 +++ b/drivers/net/wireless/b43/main.c
254 @@ -4650,7 +4650,7 @@ static void b43_wireless_core_exit(struc
255         switch (dev->dev->bus_type) {
256  #ifdef CONFIG_B43_BCMA
257         case B43_BUS_BCMA:
258 -               bcma_core_pci_down(dev->dev->bdev->bus);
259 +               bcma_host_pci_down(dev->dev->bdev->bus);
260                 break;
261  #endif
262  #ifdef CONFIG_B43_SSB
263 @@ -4697,9 +4697,9 @@ static int b43_wireless_core_init(struct
264         switch (dev->dev->bus_type) {
265  #ifdef CONFIG_B43_BCMA
266         case B43_BUS_BCMA:
267 -               bcma_core_pci_irq_ctl(&dev->dev->bdev->bus->drv_pci[0],
268 +               bcma_core_pci_irq_ctl(dev->dev->bdev->bus,
269                                       dev->dev->bdev, true);
270 -               bcma_core_pci_up(dev->dev->bdev->bus);
271 +               bcma_host_pci_up(dev->dev->bdev->bus);
272                 break;
273  #endif
274  #ifdef CONFIG_B43_SSB
275 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
276 +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
277 @@ -4669,7 +4669,7 @@ static int brcms_b_attach(struct brcms_c
278         brcms_c_coredisable(wlc_hw);
279  
280         /* Match driver "down" state */
281 -       bcma_core_pci_down(wlc_hw->d11core->bus);
282 +       bcma_host_pci_down(wlc_hw->d11core->bus);
283  
284         /* turn off pll and xtal to match driver "down" state */
285         brcms_b_xtal(wlc_hw, OFF);
286 @@ -5002,7 +5002,7 @@ static int brcms_b_up_prep(struct brcms_
287          * Configure pci/pcmcia here instead of in brcms_c_attach()
288          * to allow mfg hotswap:  down, hotswap (chip power cycle), up.
289          */
290 -       bcma_core_pci_irq_ctl(&wlc_hw->d11core->bus->drv_pci[0], wlc_hw->d11core,
291 +       bcma_core_pci_irq_ctl(wlc_hw->d11core->bus, wlc_hw->d11core,
292                               true);
293  
294         /*
295 @@ -5012,12 +5012,12 @@ static int brcms_b_up_prep(struct brcms_
296          */
297         if (brcms_b_radio_read_hwdisabled(wlc_hw)) {
298                 /* put SB PCI in down state again */
299 -               bcma_core_pci_down(wlc_hw->d11core->bus);
300 +               bcma_host_pci_down(wlc_hw->d11core->bus);
301                 brcms_b_xtal(wlc_hw, OFF);
302                 return -ENOMEDIUM;
303         }
304  
305 -       bcma_core_pci_up(wlc_hw->d11core->bus);
306 +       bcma_host_pci_up(wlc_hw->d11core->bus);
307  
308         /* reset the d11 core */
309         brcms_b_corereset(wlc_hw, BRCMS_USE_COREFLAGS);
310 @@ -5214,7 +5214,7 @@ static int brcms_b_down_finish(struct br
311  
312                 /* turn off primary xtal and pll */
313                 if (!wlc_hw->noreset) {
314 -                       bcma_core_pci_down(wlc_hw->d11core->bus);
315 +                       bcma_host_pci_down(wlc_hw->d11core->bus);
316                         brcms_b_xtal(wlc_hw, OFF);
317                 }
318         }
319 --- a/include/linux/bcma/bcma.h
320 +++ b/include/linux/bcma/bcma.h
321 @@ -434,6 +434,9 @@ static inline struct bcma_device *bcma_f
322         return bcma_find_core_unit(bus, coreid, 0);
323  }
324  
325 +extern void bcma_host_pci_up(struct bcma_bus *bus);
326 +extern void bcma_host_pci_down(struct bcma_bus *bus);
327 +
328  extern bool bcma_core_is_enabled(struct bcma_device *core);
329  extern void bcma_core_disable(struct bcma_device *core, u32 flags);
330  extern int bcma_core_enable(struct bcma_device *core, u32 flags);
331 --- a/include/linux/bcma/bcma_driver_pci.h
332 +++ b/include/linux/bcma/bcma_driver_pci.h
333 @@ -240,10 +240,8 @@ struct bcma_drv_pci {
334  
335  extern void bcma_core_pci_early_init(struct bcma_drv_pci *pc);
336  extern void bcma_core_pci_init(struct bcma_drv_pci *pc);
337 -extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc,
338 +extern int bcma_core_pci_irq_ctl(struct bcma_bus *bus,
339                                  struct bcma_device *core, bool enable);
340 -extern void bcma_core_pci_up(struct bcma_bus *bus);
341 -extern void bcma_core_pci_down(struct bcma_bus *bus);
342  extern void bcma_core_pci_power_save(struct bcma_bus *bus, bool up);
343  
344  extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev);
345 --- a/include/linux/bcma/bcma_driver_pcie2.h
346 +++ b/include/linux/bcma/bcma_driver_pcie2.h
347 @@ -143,6 +143,8 @@
348  
349  struct bcma_drv_pcie2 {
350         struct bcma_device *core;
351 +
352 +       u16 reqsize;
353  };
354  
355  #define pcie2_read16(pcie2, offset)            bcma_read16((pcie2)->core, offset)